The glasses begin to slide down the nose, leaving red marks and causing discomfort, exactly at the moment when the old silicone pads lose elasticity or tear. If you're looking, where Symbolization for silicone glassesIt is time to replace the worn-out element, which directly affects the correct fit of optics and visual acuity. Ignoring the problem leads to constant correction of the frame with your hands, which not only distracts, but also contributes to faster contamination of the lenses and deformation of the bows.
The modern market of accessories offers many options, from universal models to specialized solutions for specific brands like Ray-Ban or Oakley. Well-chosen silicone ensures a uniform distribution of the weight of the structure, preventing pressure on the cartilage tissue of the nose. In this article, we will break down all aspects of choosing, installing and caring for these important elements so you can enjoy comfortable wearing optics.
Criteria for the selection of high-quality silicone pads
The first thing to look for when looking for a replacement is the fabrication material. Quality. silicone It should be made of medical silicone, which is hypoallergenic and does not cause irritation even with prolonged contact with the skin. Cheap analogues of soft plastic or rubber quickly turn yellow, harden in the cold and can leave unpleasant marks on the face.
It is important to take into account the shape of the contact area, as it should fit as closely as possible to the individual anatomical features of your nose.
There are flat, concave and convex models, each designed for a specific type of frame and shape of the nose.
Incorrectly selected geometry will lead to the fact that the glasses will rest on one point or, conversely, hang around.
⚠️ Note: When buying, pay attention to the smell of the product - a sharp chemical aroma indicates the use of toxic materials of low quality.
It is also worth assessing the transparency of the material: a good silicone remains transparent or translucent for a long time, without becoming cloudy from the effects of ultraviolet light and skin fat.
Types of anchorages and frame compatibility
Before ordering and Symbolization for silicone glassesYou need to clearly define the type of fastening installed on your frame. There are two main options: a screw mount, where the pad is fixed by a small cog, and a "push-in" system (latches), where the element is simply inserted into the slot of the metal arch. An error in choosing the type of attachment will make the installation impossible without a major modification of the design.
For metal frames, a screw mechanism is most often used, which allows you to adjust the angle of inclination of the pad. In such cases, it is important that the hole in the nose-hold exactly coincided with the diameter of the screw, otherwise the part will luft or the screw will not be able to twist to the end. Plastic frames often have integrated rhinos, but there are models with removable elements that require special care during dismantling.
- 🔍 Screw fastening - requires a miniature screwdriver and an exact match of the diameter of the hole.
- 🔍 Push-in – is installed by hand effort, it is important not to damage the plastic fixture.
- 🔍 Adhesive bases are rare, require special surface preparation and time for polymerization.
Table of dimensions and compatibility
The size of the rhinostope plays a critical role in the comfort of wearing. Too small a pad will get into the skin, and too large can shift the optical center of the lenses relative to the pupils. Below is a table that helps you navigate the standard sizes that can be found on sale.
| Typical size | Diameter (mm) | Recommended application | Features |
|---|---|---|---|
| XS (Small) | 6-8 mm | Children's glasses, narrow frames | Minimum contact area |
| S (Standard) | 9-11 mm | Women and most men's models | Universal size |
| L (Big) | 12-14 mm | Sports frames, heavy lenses | Increased footing area |
| XL (Special) | 15+ mm | Specialized optics | Maximum comfort with weight |
When ordering through online stores, always check the millimeter line with your current item, if it is preserved.
If old pads are lost, measure the distance between the metal "horns" of the frame where they are inserted.
For difficult cases, when standard dimensions are not suitable, it makes sense to contact the optics for the selection of original components.
Instructions for self-replacement of nasopores
Replacement silicone This is a procedure that can be performed at home with a minimum set of tools. You will need a small cross screwdriver (often bundled with glasses or sold separately), tweezers and soft fabric to wipe the lenses. Before starting work, wash your hands thoroughly so as not to bring dirt and fat to new parts and lenses.
☑️ Checklist before replacement
Start by carefully twisting the screw holding the old pad. Movements should be smooth, without excessive pressure, so as not to break the thread in the delicate arc. If the screw is rusted and not spinning, drop a drop of a special solvent or oil, but avoid getting liquid on the lenses, especially if they have an anti-reflective coating.
⚠️ Warning: Never use force to remove old items if they don't go - this can cause the metal arc of the frame to break.
After removing the old part, clean the attachment site from the remains of skin fat and dust.
Install a new one. silicone, combining the holes, and carefully twist the screw.
Do not tug the screw as this may damage the plastic part of the pad or thread.
Care and extension of the life of accessories
So silcon They served as long as possible and did not lose their properties, they must be properly cared for. Rub them daily with a soft microfiber wipe along with the lenses, removing the skin fat, which is the main cause of the destruction of the structure of the silicone. The fatty acid contained in the secretions of the skin, over time, makes silicone sticky and promotes the reproduction of bacteria.
Chemical resistance of silicone
Silicone is resistant to water and weak solutions, but is afraid of aggressive chemistry. Do not wipe the rhinospores with acetone, high concentration alcohol or window washing products with ammonia. This will lead to clouding of the material and the appearance of microcracks in a short time.
Once a week, it is recommended to wash the glasses under warm running water using a soft soap or a special spray for optics. This will help remove the deep contaminants that accumulate in the porous structure of the material. Regular hygiene prevents the appearance of an unpleasant odor and allergic reactions on the skin of the nose.
- 💧 Wash your glasses with warm water and soap at least once a week.
- 💧 Avoid contact with cosmetics that contain oils.
- 💧 Store the glasses in a case to prevent oxidation of the metal parts of the attachment.
Where to buy: an overview of options and savings tips
If you've decided Symbolization for silicone glassesYou will have a choice between specialized optics salons, pharmacies and online sites. In the salons of optics you will be offered original components that will ideally suit your model, but the price for a pair can be significantly higher than the market. This is a good option if your glasses are expensive and you are afraid to experiment with compatibility.
Buy rhinosupers immediately sets of 5-10 pairs. The price per unit in the set is much lower, and spare parts are always useful when traveling or in case of sudden breakdown.
Online marketplaces offer a huge selection of universal sets at an affordable price. Here you can find sets that include pads of different sizes and even spare cogs. When ordering online, carefully read reviews about the stiffness of silicone and the quality of the plastic holders. Cheap sets often sin that the cogs in the kit are too short or long.
The optimal solution for most users is to buy a universal set of 5 pairs of different sizes on the online platform, which allows you to experimentally choose the ideal option.
Pharmacies can also offer basic options, but the range there is usually limited to 1-2 models.
When buying, pay attention to the packaging – it should be sealed to protect silicone from dust.
Comparing prices at different points can save up to 50% of the budget for optics maintenance.
Frequently Asked Questions (FAQ)
How often should silicone rhinos be changed?
The recommended replacement frequency is every 6-12 months, depending on the intensity of wearing. If you notice that the silicone has turned yellow, become sticky, cracked or glasses have begun to slide, you need to make a replacement immediately.
Can I use a rhinospore from another model of glasses?
Yes, if the type of attachment (screw or latch) and the diameter of the hole match. Many manufacturers use standardized mount sizes, so universal sets fit 90% of metal frames.
What to do if a cog from a rhinoporosis is lost?
In most of the universal sets that are possible Symbolization for silicone glassesThere are already spare cogs of different sizes. If there is no screw, you can temporarily use a toothpick or match, but this is a temporary solution before buying a new kit.
Why are the new rhinos slipping?
The new silicone may be too smooth. Try to wipe them with an alcohol napkin to remove the factory lubricant. If the problem persists, it may be that the size is too small or the shape does not fit your nose.