Simulator My Summer Car is not just a game about assembling a car, but a real test of survival, patience and engineering ingenuity. Thousands of players around the world are wondering: how to drive in this ruthless world, where even a simple bolt can cause a fatal accident? The path from a pile of rusty parts to a complete car, capable of covering the distance to an Alko store, takes from several hours to tens of days in real time.
Unlike arcade racing, here you have to manually assemble each unit, configure carburetor and make sure that the braking system does not fail at the first turn. Success depends solely on your knowledge of the internal combustion engine and your attention to detail. An incorrectly tightened nut or a forgotten wire can cause the motor to seize or stall in the middle of the forest.
This article will become your navigator in the world of the Finnish automobile industry of the 1980s. We will analyze all stages of preparation Satsuma GT to departure, paying special attention to critical points that beginners often miss. Get ready for dirty work, the smell of gasoline and the sweet sound of a running engine.
Preparing the garage and searching for components
Before you think about traveling, you need to ensure that you have all the necessary details. The game begins with only the skeleton of a body lying around in the garage and components scattered across the map. Your primary task is to put everything together. Some parts will have to be purchased in the store Teimo's Auto, others - found in the forest or knocked out of a machine gun.
It is critically important not to just lump everything together, but to sort the components. You will need tools that are in the drawer or scattered around. Without the right one tools assembly is not possible. Pay special attention to searching for manuals, since the assembly diagram is your only friend in this chaos.
Organizing your workspace is the key to success. If parts are lying around, you'll spend hours searching for the right bolt. Use a workbench and shelves to sort small items.
⚠️ Attention: Do not throw away old or rusty parts immediately. Some can be restored or used as a temporary replacement until you find new ones. Losing a unique component can stop the entire project.
Engine and transmission assembly
The heart of your car is the engine. Assembling the cylinder block, installing the crankshaft, pistons and camshaft requires precision. Each bolt must be tightened to the correct torque, although in the game this is simplified to a distinctive click. Do not forget to lubricate the rubbing parts with oil before assembly, otherwise motor may jam on first start.
After assembling the block, it is necessary to install the cylinder head and adjust the valves. The gaps must be perfect. Next comes the installation of attachments: generator, starter and fuel pump. The transmission also requires attention: check the condition of the clutch and the integrity of the gearbox.
Installing the engine into the body is a separate stage. You will need a winch or the help of friends (if playing in co-op) to carefully lower the unit into place. After this, connect all hoses and cables.
☑️ Engine check
Electrical and wiring connections
The most difficult stage for many players is the electrical part. B Satsuma wiring is not routed automatically; Each wire must be connected manually according to the diagram. An error here could result in a short circuit, fire, or ignition system failure.
Start by connecting the battery and main power circuits. Then go to the ignition system: coil, distributor, spark plugs. Make sure that high voltage wires do not touch metal parts of the engine. Correct connection starter and the generator will ensure stable starting and charging of the battery.
Checking all systems before the first start is mandatory. Use a multimeter or just a visual inspection to make sure there are no loose wires. The spark should be powerful and blue.
What happens if the wires are mixed up?
Reversing the polarity of the battery or connecting the wires incorrectly can blow a fuse, damage the electronics, or even cause the battery to explode, causing damage to the character and damaging nearby parts.
Brake system and suspension
Safety comes first. Before driving, you need to assemble and bleed the brake system. Old brake hoses often leak, so it's best to replace them. Assemble the calipers, install the pads and drums.
Bleeding the brakes requires brake fluid and an assistant (or using a special technique with a bottle). Air in the system will make braking impossible, which on the narrow roads of the Finnish outback is tantamount to suicide. Also check the condition pendants: shock absorbers, springs and levers must be intact.
Wheels must be balanced and set to the correct pressure. Bald tires will not provide traction on gravel or asphalt.
| Component | Condition | Action | Risk |
|---|---|---|---|
| Brake hoses | Cracked | Replace | Brake failure |
| Brake fluid | Low level | Milk and pump | Air lock |
| Tires | Bald | Replace or stud | Loss of control |
| Shock absorbers | Flowing | Replace | Body rocking |
Painting and appearance
Although you can technically drive a rust bucket, the car needs to be painted in order to complete the game and gain respect from the virtual villagers. The process takes a long time and requires preparation: sanding, priming, painting and varnishing.
Use a sander to remove rust and old paint. Then apply the primer in an even layer. The main color is applied in several layers with intermediate drying. Finish coating - varnish, which will add depth to the color and protect the body.
Don't forget about the interior and interior details. A clean interior and working instruments create a feeling of comfort during long trips. Installing a stereo system will add to the atmosphere.
Use a polishing machine after the varnish has dried to remove minor defects and give the body a mirror shine. This will also increase the car's resale value slightly.
Carburetor setup and first start
The moment of truth. The engine is assembled, the electrical is connected, the fuel is filled. But the car doesn't drive? Most likely it's the carburetor. B My Summer Car This is the most capricious knot. You need to adjust the mixture quality and quantity screws, as well as the throttle position.
Start the engine and listen to it. If it stalls at idle, add more mixture. If it shoots into the muffler, the mixture is too rich. Smoke from the exhaust pipe will indicate combustion problems. The ideal setting ensures smooth sound and no black smoke.
Make your first trip carefully. Check brake operation at low speed. Listen for extraneous knocks. The engine should run smoothly at all speeds.
Proper carburetor tuning is a balance between power and stability. Don't be afraid to experiment with the propellers, recording changes to find the perfect position for your engine.
Frequently asked questions (FAQ)
Why does the car stall immediately after starting?
Most likely, the carburetor is incorrectly adjusted or there are problems with the fuel supply. Check that the gas tank valve is open, that the fuel pump is working, and that the filter is not clogged. The reason may also be a lack of spark at the spark plugs.
How to get a driver's license in the game?
To obtain a license you must successfully pass a driving test. You will be taken to the police station, where you will need to perform several exercises on the site and drive around the city, observing traffic rules.
Is it possible to drive a car without painting?
Yes, technically the car will drive without painting. However, a rusty body will lower the car's overall score, and the police may stop you for inspection more often. In addition, without paint the body will continue to rust.
What to do if the engine overheats?
Check the antifreeze level in the radiator. Make sure the thermostat is open and the water pump is running. The cause may also be too lean a mixture in the carburetor or late ignition.