Recovery of cracked and worn surfaces of the interior of a car or furniture is a task that requires not only high-quality materials, but also a deep understanding of chemical processes. One of the most popular solutions on the market has been around for many years. fluidAmong many brands, the company’s products occupy a special place. Resmat. Car owners often seek information about how effectively this compound hides defects and how long it lasts after application.
Analysis of numerous reviews of professional painters and amateurs allows you to make an objective picture. Products Resmat It is positioned as a universal restorer, capable of penetrating the structure of the material and creating an elastic film. However, like any chemical product, this restorer has its own nuances of application, which are rarely written in advertising brochures, but must be mentioned in real ones. testimonial.
In this article we will discuss in detail the composition, technology and real results of using liquid skin. Resmat. You will learn why some users are delighted and others are faced with detachment of the material, and how to avoid the typical mistakes in the restoration of leather and leather.
Composition and operation of the restorer Resmat
The basis of the product is the aqueous dispersion of polyurethanes and acrylic resins of high elasticity. Exactly. polyurethane It is responsible for creating a strong but flexible film that does not crack when the base is deformed. Unlike cheap alcohol-based analogues, the formula Resmat It allows the material to “breathe”, which is critical for natural skin.
The principle of operation is the deep penetration of active components into microcracks. After evaporation of moisture, polymerization occurs, and the liquid composition turns into a monolithic coating. It is important to note that adhesion (clutch) depends on the preliminary preparation of the surface. Without degreasing, even the most expensive composition will begin to peel off in a few weeks.
There are two main types of products in the line: single-component (ready for use) and two-component (requiring mixing with a hardener). For the interior of the car, which is exposed to aggressive ultraviolet radiation and temperature changes, It is recommended to use two-component systems with UV filtersBecause they provide maximum durability.
Before buying, always check the production date at the bottom of the bottle. The shelf life of liquid skin is limited, and expired material may not polymerize properly, remaining sticky.
Application technology: step-by-step instructions
The quality of the final result depends on the surface preparation by 80%. The first step is always a thorough cleaning of the restored site. Use a special degrease or alcohol solution to remove silicones, dirt and fat spots. If you skip this stage, fluid It's not evenly laid.
Next is the process of grinding the edges of damage. It is necessary to smooth the transition between the whole skin and the damaged area so that after applying the composition, the border is less noticeable. For deep cuts or holes, a reinforcement mesh or a special filler is pre-used, which dries longer than the main layer.
☑️ Preparation for restoration
Application of the material itself Resmat It's made in thin layers. Do not try to close a deep scratch with one stroke - this will lead to the formation of bubbles and long drying. Use an airbrush for perfect texture or a special spatula for local repairs. Each layer must dry for a certain time specified in the instructions.
The final stage is texturing and painting. To restore the natural relief of the skin, a matrix with the desired pattern (grain) is superimposed on the not yet completely dried upper layer. After complete polymerization, the surface is painted in the desired color and covered with finishing varnish for protection.
Comparative analysis: Resmat vs. competitors
There are many analogues on the market, from budget Chinese trains to premium Italian brands. To understand the place Resmat In this series, let’s look at the key parameters. Budget options often sin excessive rigidity after drying, which leads to rapid cracking on the folds.
Products Resmat It is located in the middle price segment, offering a balance between cost and quality. Unlike some competitors, this brand offers a wide palette of ready-made colors, which makes it easier for beginners to work. However, professionals often prefer to mix colors themselves for the perfect tone.
| Parameter | Resmat (Middle segment) | Budgetary analogues | Premium brands |
|---|---|---|---|
| Elasticity | Tall. | Medium/Low | Very high. |
| Time to dry | 15-20 min (layer) | 10-15 minutes | 20-30 minutes |
| Resistance to UV | Good. | Low. | Great. |
| Price for 50ml | Medium | Low. | Tall. |
It is worth noting that expensive brands often require the purchase of entire sets of chemicals, while squirrel It is also sold in small packages, which is convenient for local repairs. On abrasion resistance (the “lastic test”), the results show that when applied correctly, the difference with the premium segment is minimal.
Real user reviews and common problems
Analyzing forums and reviews, we can identify several typical scenarios. Positive reviews are most often associated with the restoration of seats and steering wheels, where the material has proven to be a reliable and elastic solution. Users note good cover and lack of stickiness after drying.
⚠️ Attention: A common problem that is written about in negative reviews is flaking of the film after 2-3 months. In 90% of cases, this is due to a violation of degreasing technology or applying a too thick layer.
Some users complain of changing color after drying. This is a characteristic feature of water dispersions: wet material is always darker. It is necessary to allow the sampler to dry completely before evaluating the final hue. There are also complaints about the difficulty of picking out rare colors, such as specific shades of gray or beige.
Professional renovators emphasize that Resmat He behaves well when working with an airbrush, without clogging the torch. However, for large areas (for example, stretching the entire sofa), the consumption may be higher than stated due to the need to apply 3-4 layers to obtain a rich color.
The Secret of Durability
Professionals advise after painting be sure to apply the finishing varnish (top coat). It is the varnish that takes the brunt of cleaning the cabin and contact with clothes, protecting the colored pigment.
Common mistakes in self-repair
The first and most serious mistake is to ignore the temperature. Work should be carried out at a temperature not lower than +18 ° C. At low temperatures, polymerization slows down or stops, and the material remains sticky forever. It is also dangerous to apply the composition under direct sunlight - the upper layer dries, trapping moisture inside.
The second mistake is the lack of reinforcement on deep damage. If you do. fluid-skin It's right into the hole without the net, and when the skin is stretched, the material will just burst. The grid creates a framework that distributes the load. This is especially true for the sidewalls of seats that are constantly experiencing mechanical stress.
The third mistake is the wrong choice of tool. Using hard brushes leaves stripes that cannot be removed. For smooth skin, an airbrush or foam tampon is ideal. For textured skin, special sponges that mimic grain can be used.
The success of repairs depends not on the brand of paint, but on the quality of surface preparation and compliance with temperature drying regimes.
Care for reclaimed surface
After completion and complete polymerization (which can take up to 24-48 hours to gain maximum strength), the surface requires proper maintenance. It is not recommended to use aggressive chemicals or abrasive sponges in the first two weeks. Polyurethane film It's gonna have to get stronger.
For regular cleaning of the cabin, use special air conditioners for the skin. They contain components that prevent drying and cracking of both natural skin and regenerated areas. Avoid products containing solvents or oils that can soften the top layer of restoration.
Check the condition of joints and joints regularly. If you notice the incipient detachment, it is better to immediately carry out local repairs, applying a drop of glue or restorer, than wait for the defect to grow. Timely prevention will prolong the life of the restored element several times.
FAQ: Frequently Asked Questions
Can I apply Resmat liquid skin to vinyl and eco-skin?
Yes, you can. The material has good adhesion to most synthetic materials, including vinyl, eco-skin and dermatine. The main condition is high-quality degreasing and the use of adhesive soil for plastic bases.
How much does the liquid skin dry completely?
The surface drying time is 15-20 minutes between the layers. However, full polymerization and a set of operational strength take from 12 to 24 hours, depending on the thickness of the layer and the humidity of the air.
Do I need to remove the seat for a quality repair?
For local repair of small scratches removal is not required. However, to repair large scuffs on the ends of the seats or backs, it is recommended to dismantle the element to have access from all sides and ensure uniform drying.
How to dilute the liquid skin if it thickens?
Since the base is water, distilled water or special water-based diluents can be used for dilution. Do not use acetone or alcohol – they can fold the polymers and spoil the material.