Likinsky Bus Plant (LIAZ) is one of the largest enterprises in Russia producing city and suburban buses. Its history goes back more than 70 years, and the geography of supplies covers not only Russian regions, but also CIS countries. Where is this strategically important plant located? The answer to this question is important not only for potential buyers of equipment, but also for partners, investors and even ordinary residents of the Moscow region who encounter buses every day LIAZ on city streets.

In this article we will look in detail at:

- Exact address and coordinates of the plant in 2026

- How to get to the enterprise by public transport and personal car

- What bus models are produced at LIAZ today?

- Why plant location affects logistics and prices for customers

We will pay special attention to practical aspects: for example, how to organize a visit to a company to inspect equipment before purchasing or where to find official dealers in your region.

———

Likinsky bus plant is located in the city Likino-Dulyovo The Moscow region is an industrial center 80 km east of Moscow. Full legal address of the enterprise:

Address: 140050, Moscow region, Likino-Dulyovo, st. Sovetskaya, 1
Navigator coordinates: 55.7106° N. latitude, 38.9503° east. d.

The plant occupies an area of more than 120 hectares, making it one of the largest industrial sites in the region. The territory includes not only production workshops, but also testing grounds, warehouse complexes and administrative buildings. For comparison: this is approximately 160 football fields!

Legally the company is registered as Joint Stock Company "Likinsky Bus Plant" (JSC "LIAZ"). Basic details for partners:

  • 📄 Taxpayer Identification Number: 5009005140
  • 📄 checkpoint: 500901001
  • 📄 OGRN: 1025000594480
  • 📄 OKPO: 00040774

This data will be useful if you plan to enter into direct contracts for the supply of buses or spare parts. For example, when registering a tender for the purchase of municipal transport.

📊 Have you ever been to the LIAZ plant?
Yes, I was on a tour
Yes, I came for work
No, but I plan to
No and I don't plan to

How to get to the LIAZ plant: 3 routes from Moscow

You can get to Likino-Dulyovo both by personal transport and by public transport. We have prepared current routes for 2026, taking into account changes in train schedules and road conditions.

1. By car (fastest way)

Travel time: 1 hour 15 minutes no traffic jams. Optimal route:

  1. Departure from Moscow by Nosovikhinskoe highway (A102) towards Noginsk.
  2. Next, go to the track M7 "Volga" (turn right after Orekhovo-Zuevo).
  3. The exit to Likino-Dulyovo is indicated by signs "LIAZ" or "Likino-Dulyovo (center)".
  4. In the city, follow the signs to the plant - they hang at all key intersections.

⚠️ Attention: On the section from Moscow to Orekhovo-Zuevo there are often traffic jams on weekdays from 7:00 to 10:00 and from 17:00 to 20:00. We recommend leaving before 6:30 or after 20:30 to save time.

2. By train (the cheapest way)

Travel time: 1 hour 40 minutes. Route:

  • 🚆 From Kazansky railway station take the train to the station "Dulyovo" (direction to Cherusti or Tuma).
  • 🚶 From the station to the plant - 20 minutes on foot or 5 minutes by taxi (cost ~150₽).
  • 🕒 Electric trains run every 30-40 minutes from 5:00 to 23:30.

💡 Helpful tip: If you are traveling with large luggage (for example, with spare parts), it is better to choose electric trains that go to "Cerusti" - they have more space for large things.

3. By bus (alternative option)

From metro station "Vykhino" bus no.320 to Likino-Dulyovo (travel time ~2 hours). However, this route is less convenient due to infrequent flights (every 1-1.5 hours) and a large number of stops.

Method Travel time Cost Convenience
Personal car 1 hour 15 minutes ~300₽ (gasoline) ⭐⭐⭐⭐⭐
Electric train 1 hour 40 minutes ~250₽ ⭐⭐⭐⭐
Bus No. 320 ~2 h ~200₽ ⭐⭐
💡

If you are going to the plant for the first time, save the coordinates in your navigator in advance - in Likino-Dulyovo, not all streets are well marked, and mobile communications may disappear.

Why the location of the LIAZ plant is important for bus buyers

At first glance, the geography of the enterprise may seem to be an insignificant factor. However, in practice, the location of the plant directly affects:

  • 💰 Bus prices — logistics costs for delivery to the regions
  • ⏱️ Delivery times — distance from transport hubs
  • 🔧 Service — availability of dealer centers in your region
  • 📦 Availability of spare parts — speed of delivery of original parts

For example, for municipal customers from Central Federal District purchasing LIAZ buses is cheaper than for the regions of the Far East due to lower transportation costs. And for private carriers, it is important that the main warehouse capacity of the plant is concentrated in the Moscow region, which speeds up repairs and the supply of spare parts.

⚠️ Attention: If you are planning to buy a LIAZ bus "from the wheels" (straight from the factory), please note that Independent departure of equipment is possible only after full payment and execution of all documents. Many buyers experience delays due to the unavailability of vehicle title or customs declarations (for export).

💡 Practical advice: Before visiting the factory, please contact the sales department (+7 (496) 462-11-00) and specify:

- Availability of the model of interest in stock

- Possibility of test drive

- List of documents for processing the transaction

What bus models will LIAZ produce in 2026?

The Likinsky plant specializes in the production city, suburban and intercity buses middle and large class. In 2026, the following models are produced here:

  • 🚌 LIAZ-5292 — flagship model with a hybrid power plant (Euro 6)
  • 🚌 LIAZ-4292 — classic city bus 12 meters long
  • 🚌 LIAZ-6213 — articulated bus (“accordion”) for routes with high passenger traffic
  • 🚌 LIAZ-5270 — commuter version with increased luggage compartment
  • 🚌 LIAZ-6212 — long-distance airliner with air conditioning and toilet

Feature of the plant - deep localization of production. For example, in models LIAZ-5292 and LIAZ-4292 the share of Russian components exceeds 70%, which is important for government customers (corresponds to government decree No. 719 on localization).

🔍 How can I find out the current prices?

Prices for LIAZ buses are determined individually and depend on:

- Equipment (engine, transmission, interior)

- Order volume (wholesale discounts from 5 units)

- Delivery region (logistics)

For example, basic version LIAZ-4292 in 2026 costs from 12.5 million rubles, and articulated LIAZ-6213 - from 22 million rubles.

What is included in the basic package of LIAZ-4292?

The standard version includes:

- Engine YaMZ-536 (Euro-5) with a power of 240 hp.

- ZF automatic transmission

- Air suspension

- Climate control in the cabin

- Video surveillance system (4 cameras)

- USB ports for charging gadgets

Additionally, you can order: a Wi-Fi router, a media system with monitors, a fare payment system using contactless cards.

How to organize a visit to the LIAZ plant: step-by-step instructions

If you plan to visit a company to inspect equipment or negotiate, follow this algorithm:

Sign up for a tour by calling +7 (496) 462-11-00

Prepare a passport (for entry into the territory)

Check the list of models available for inspection

Think over the route (see section "How to get there")

Plenty of time - visiting the plant takes 2-3 hours-->

📌 Important details:

  1. Excursions are available by appointment only on weekdays from 9:00 to 16:00.
  2. Photo and video shooting on the plant territory allowed only with the permission of the administration.
  3. For foreign citizens it is required arrange a visit in advance with the security department (at least 5 days in advance).

⚠️ Attention: If you are going to the factory to conclude a purchase and sale agreement, take with you:

- Seal of the organization (for legal entities)

- Power of attorney for the right to sign documents (if you are acting on behalf of the company)

- Payment details (current account)

Without these documents, it will not be possible to complete the transaction on the spot!

💡 Advice for carriers: If you plan to remove the bus from the factory warehouse, check in advance:

- Availability of a valid OSAGO per vehicle

- Readiness PTS (sometimes it takes 1-2 days to process it)

- Possibility of registration with the traffic police at your place of residence (some models require special permission)

Alternative ways to purchase LIAZ buses without visiting the factory

Not all buyers find it convenient to travel to Likino-Dulyovo. Fortunately, there are several alternative ways to purchase a bus:

  • 🏢 Official dealers - a network of 45 dealership centers across Russia (list on the website liaz.ru)
  • 🖥️ Online order — through the form on the plant’s website with delivery to your region
  • 🤝 Auctions and tenders — municipal procurement through platforms zakupki.gov.ru or rtstender.ru
  • 🔄 Secondary market — purchase of used buses with mileage (we recommend checking the history through autocode.rf)

📊 Comparison of purchasing methods:

Method Pros Cons Deadlines
Factory direct purchase Minimum price, possibility of inspection You need to go to Likino-Dulyovo, limited range in stock 1-3 days
Via dealer Proximity to your region, assistance with registration The price is 5-10% higher 3-7 days
Online order Convenient, you can choose the package Long delivery (up to 2 weeks), no possibility of inspection 7-14 days

💡 Important for government customers: When purchasing through tenders, pay attention to localization requirements. For example, in 2026, to participate in municipal procurement, buses must have at least 60% Russian components (confirmed by an industrial assembly certificate).

Common mistakes when buying LIAZ buses and how to avoid them

Even experienced carriers sometimes encounter problems when purchasing equipment. We have collected TOP-5 errors and ways to prevent them:

  1. Purchase without inspection

    🔹 Problem: In the photographs, the bus looks perfect, but upon delivery, defects in the body or interior are discovered.

    🔹 Solution: Order a video inspection with detailed filming of problem areas (for example, the bottom for corrosion).

  2. Ignoring the warranty

    🔹 Problem: Some dealers sell buses without an official factory warranty.

    🔹 Solution: Check the availability of the warranty card with the seal of JSC LIAZ. The warranty period for new buses is 2 years or 100,000 km.

  3. Unaccounted for shipping costs

    🔹 Problem: The bus price does not include transportation, which can cost up to RUB 500,000 for distant regions.

    🔹 Solution: Check the full cost with turnkey delivery to your city.

⚠️ Attention: If you buy a used LIAZ bus, be sure to check:

- Availability diagnostic card (without it you cannot apply for compulsory motor liability insurance)

- Repair history (engine or gearbox replacements are especially critical)

- Condition of the frame for hidden damage after an accident

Use services to check autocode.rf or carfax.ru.

💡 Useful lifehack: When purchasing several buses, negotiate complex delivery. For example, transporting 3 buses from Likino-Dulyovo to Yekaterinburg will cost less than delivering each one separately (saving up to 30%).

FAQ: Answers to frequently asked questions about the LIAZ plant

Is it possible to buy a LIAZ bus on credit or lease?

Yes, the plant cooperates with several banks and leasing companies:

  • 🏦 SberLeasing — rate from 8% per annum, down payment from 10%
  • 🏦 VTB Leasing — special programs for municipal customers
  • 🏦 Gazprombank Leasing — preferential terms for the purchase of environmentally friendly models (Euro 6)

For registration you will need: a passport, TIN, extract from the Unified State Register of Legal Entities (for legal entities) and financial statements for the last year.

What documents are needed to remove a bus from the factory?

To travel on the new LIAZ bus, prepare:

  1. Sales and purchase agreement (3 copies)
  2. Certificate of acceptance and transfer of equipment
  3. Vehicle Passport (PVC)
  4. Invoice and delivery note
  5. MTPL policy (can be issued online in 10 minutes)
  6. Certificate of registration (if the bus is already registered)

⚠️ Take the bus out of the plant without a title impossible — its processing may take 1-2 days.

Is there a service center for repairs at the LIAZ plant?

Yes, it works on the territory of the plant LIAZ official service center, where you can:

  • 🔧 Go through warranty maintenance
  • 🛠️ Repair the bus with post-warranty service
  • 🔄 Exchange defective parts (if a factory defect is confirmed)

The cost of a standard hour in 2026 is: 2 500₽. Registration by phone: +7 (496) 462-11-00 (ext. 205).

💡 Advice: If you come to the factory to pick up a bus, you can immediately sign up for TO-0 (run-in service after 5,000 km).

Is it possible to order a LIAZ bus with a non-standard configuration?

The plant offers flexible options for retrofitting buses. For example, you can order:

  • 🚌 Salon: leather seats, air conditioning, USB ports, Wi-Fi
  • 🔋 Engine: transition from Euro-5 to Euro-6 (surcharge ~800,000₽)
  • 🎨 Design: branded paint, stickers, LED lighting
  • 🛡️ Security: video recording system with output to the driver’s monitor, blind spot sensors

Production time for a bus with non-standard configuration is from 30 to 60 days (depending on production workload).

Which LIAZ buses are suitable for intercity transportation?

For intercity routes, the plant recommends two models:

  1. LIAZ-6212 - a classic liner for 45-50 seats with luggage racks and a toilet. The range without refueling is up to 1,000 km.
  2. LIAZ-5270 "Valdai" — a comfortable bus with high seats, air conditioning and a multimedia system. Suitable for tourist trips.

Both models are equipped with engines YaMZ-536 (euro-5) or Cummins ISL (Euro-6) with a power of 280-300 hp.