Modern. Hyundai Solaris The second generation is a car that pleases owners not only with dynamics, but also with comfort. However, even the most sophisticated ventilation system will not work effectively if the air conditioner is not filter-piece It's full of dust and dirt. Regular replacement of this consumable is the key to clean air and driver health.
Many motorists mistakenly believe that maintenance of the air conditioning system is the lot of service centers. In fact, the procedure is so simple that Replacement of the Solaris 2 cabin filter Anyone who does not have special technical skills can do it. It will only take a few minutes of your time.
In this article, we will analyze in detail the process of choosing a suitable filter, consider the nuances of its installation and answer questions that often arise from owners of Korean sedans. You will see that saving on your own health and comfort of the trip does not make sense when everything can be done independently and efficiently.
Why you need to regularly replace the filter
The cabin filter, often referred to as an air conditioning system filter, acts as a barrier between the polluted outdoor air and the lungs of passengers. In urban environments, especially in megacities, the air is saturated with fine dust, exhaust gases and pollen of plants. Coal filter It is able to trap not only solid particles, but also neutralize unpleasant odors, which is critical when driving in traffic jams.
If you ignore the replacement regulations, the bandwidth of the element falls. This leads to the fact that fan It starts working with increased load, emitting whistles and humming. In addition, weak blowing of glass in winter can cause fogging, which directly affects driving safety.
Visually determine the state of the old element can only be extracted. It usually changes color from white or gray to dark gray or even black, and leaves and small debris accumulate between the folds of the material. Regular replacement is single-handed ensure that allergens and mold spores do not enter the salon.
Selection of the appropriate filter element
The auto parts market offers many options for Hyundai Solaris second generation. It is important to understand the difference between conventional paper filters and more advanced carbon models. The first ones are cheaper, but they only protect against large dust. The second has an additional layer of activated carbon, which adsorbs harmful gases and odors.
When choosing, you should focus not only on the brand, but also on the geometry of the product. Incorrectly selected size can lead to a loose fit of the frames, and the air will bypass the filtration. The original part number for most Solaris 2 models is 97603-D2000 Or its analogues.
Among the proven manufacturers can be distinguished the following:
- 🇰🇷 Mando - often supplies components to the conveyors Hyundai / Kia, excellent quality.
- 🇩🇪 Mann-Filter - standard filtration, high dust capacity and reliability.
- 🇯🇵 GoodWill Available option with good resources.
- 🇨🇳 Big Filter Russian brand with production in China, a popular budget choice.
Preparation for work and necessary tools
The replacement procedure is so simple that it requires almost no tools. You don’t have to drive the car onto the lift or look for a viewing hole. All manipulations are carried out directly in the cabin from the front passenger.
The only thing you may need is a flashlight to better view the insides of the niche, and possibly a vacuum cleaner to clean the box itself of accumulated dirt before installing a new element. It is also recommended to prepare wet rags for cleaning plastic surfaces.
It is important to ensure good lighting of the work area. Sunlight falling through the windshield may not be enough, especially if the replacement is done in cloudy weather or in a garage. High-quality lighting will help to avoid errors during installation.
☑️ Preparation for replacement
Step by step: how to get to the filter
First, open the front passenger door. You need to access the torpedo end where the glove compartment (dressbox) is located. It is behind it that the cabin filter body is hidden. No bolts or screws need to be unscrewed at this stage.
Open the glove compartment and completely free it from the contents. Then pay attention to the side limits. On both sides of the cloth box are plastic stops that prevent it from falling out when fully opened. They need to be gently compressed or removed from engagement to lower the cover below the normal level.
After the limiters are released, smoothly press the sides of the glove compartment inside to take them out of the grooves, and lower the lid as down as possible. In some configurations, it may be necessary to disconnect the damper cable if it prevents complete lowering. Now your eyes will open a black plastic cover of the filter case.
The filter cover is attached to the latches. Usually there are two or three of them, they are located on the lower edge of the lid. Press the locks at the same time and pull the lid on yourself. She should be easy to take off. If it doesn’t go, don’t use excessive force – check if all latches are free.
Before you pull out the old filter, take a picture of the direction of the arrows on its end. This will help to properly orient the new element during installation, so that the airflow goes in the right direction.
Removing the old and installing a new filter
After removing the cover, you will see the end of the old filter. Carefully remove it from the niche. Be prepared for the fact that when extracting part of the accumulated dust can fall asleep, so it is advisable to keep a vacuum cleaner on hand or immediately wipe the niche.
Carefully examine the extracted element. If it is deformed or has severe contamination, it will confirm the need for replacement. Now, get a new filter. Note the marking: the side frame must have an arrow indicating the direction of the air flow (Air Flow).
This arrow should look down (to the floor) or in the direction of air movement from the fan to the evaporator. In the case of Hyundai Solaris 2Air is usually supplied from top to bottom, so the arrow should point down. Installing the filter "upside down" will dramatically reduce the efficiency of cleaning and can lead to a whistle.
Insert the new element into the guides. It should enter without much effort. If the filter has to be pushed forcefully, perhaps the wrong size is chosen. Make sure that the sealing rubber band along the perimeter of the filter is not bent and fits tightly to the walls of the body.
The main rule of installation: the arrow Air Flow on the filter should always indicate the direction of movement of air - in the case of Solaris 2, this is usually the direction downwards, towards the feet of the passenger.
Assembly and performance check
After successful installation of the filter, return the plastic cover of the case to its place. It should be snapped with a distinctive sound. Make sure all the locks are in place and there are no gaps through which unfiltered air could enter the system.
Now, raise the glove compartment to the top position. Insert the side limiters into the grooves and dilute them so that they again perform their function of stoppers. Check the smoothness of the door of the crate - it should not jam or spontaneously open.
Start the engine and turn the fan of the stove on to maximum power. Listen to the system. If you hear a foreign whistle or noise, it may mean that the filter is curved or the lid of the case is not fully closed. In normal mode, the airflow should become noticeably stronger and cleaner.
What if a whistling appears after the replacement?
If after installing a new filter, a whistle appears, check the density of the lid of the case. Often the reason lies in the fact that the sealing gum of the filter bent or the lid did not snap to the end. Also, whistles can occur if a filter with high aerodynamic resistance is too dense, not suitable for this fan model.
Table: Comparison of popular filter models
To make it easier for you to decide on the choice, we have prepared a comparative table of the main characteristics of popular filters for the use of the filters. Solaris 2. These parameters will help to assess the resource and effectiveness of different options.
| Brand | Type | Resource (km) | Features |
|---|---|---|---|
| Hyundai (OEM) | Coal | 10 000 | Perfect geometry, average dust capacity |
| Mann-Filter | Coal | 15 000 | High degree of filtration, strong frame |
| Mando | Paper/Coal | 10 000 | Optimal Price/Quality Relationship |
| GoodWill | Coal | 8 000 - 10 000 | Affordable price, standard features |
⚠️ Attention: Do not use filters that are not designed for your vehicle. Too dense a material can create excess resistance, which will lead to overheating of the electric motor of the stove and reduce the efficiency of heating.
Frequent mistakes and helpful tips
When self-service is often made by beginners, typical mistakes are made. One of them is cleaning the box. Changing the filter, leaving dust and leaves accumulated over the years, is pointless. The new element will instantly become contaminated and may even become moldy from the humid environment.
Another common mistake is to install a filter without taking into account the direction of airflow. As mentioned earlier, this negates the work of the adsorbent layer and worsens ventilation. Always look for the marking on the end.
Also, do not delay the replacement until the appearance of an unpleasant smell. By this point, the filter has long exhausted its resource and could become a source of bacteria. Change it regularly, preferably every 10,000 km or once a year, regardless of the mileage.
⚠️ Attention: When installing, do not make excessive efforts to the plastic latches of the glove compartment and filter cover. Plastic in the cold becomes fragile and can easily crack. Work carefully and at room temperature.
Timely replacement of the filter prolongs the life of the air conditioning system and preserves the health of the airways of the driver and passengers.
Questions and Answers (FAQ)
How often should I change the cabin filter to Solaris 2?
The recommended replacement interval is 10,000 – 15,000 km or once a year. However, if you often drive on dusty roads or stand in traffic jams, it is better to reduce the interval to 7 000 – 8 000 km.
Can I wash the old filter and reuse it?
No, it is absolutely impossible to wash cabin filters, especially coal filters. Water destroys the structure of the filter material and washes out activated carbon. After drying, such a filter will become a source of mold and bacteria.
Why does the filter blow weaker than before?
If you have installed a high-quality carbon filter with a high degree of filtration, airflow resistance may be slightly higher than that of an old paper or cheap counterpart. It's normal. If it blows very weakly, check the correctness of the installation (whether the filter is inverted) and the purity of the air conditioner evaporator.
What is the difference between a conventional and a carbon filter?
A conventional filter only traps mechanical particles (dust, down). The carbon filter has an additional layer with activated carbon, which absorbs harmful gases (nitrogen oxides, ozone) and unpleasant odors of exhaust gases.
Where is the filter in Hyundai Solaris 2?
Salon filter is located in the cabin of the car, behind the glove compartment (dress box) from the front passenger. Access to it is opened after lowering the glove compartment cover below the usual level.