Salon filter in Daewoo Matiz A small but critically important detail, which depends not only on the cleanliness of the cabin air, but also on the health of the driver and passengers. Many owners of this compact car underestimate the need for regular filter replacement, writing off the dustiness of the cabin as “climate features” or “old air conditioning”. Meanwhile, a polluted filter can cause allergies, unpleasant odors and even deterioration of the ventilation system.
In this article, we will discuss Step by step instructions for replacing the cabin filter Matiz generation (including restyled versions), we will tell you how to choose a quality filter among dozens of offers on the market, and we will warn against typical mistakes that even experienced car owners make. We'll pay special attention. hidden nuances – for example, why a whistle may appear after a replacement or how to properly install the filter so that it does not deform after a month.
If you have never changed the filter yourself, don’t worry. Matiz This procedure takes no more than 15 minutes and does not require special tools. And with our tips and photo instructions, you can cope even faster - without the risk of breaking plastic latches or leaving the filter "half installed".
Why to change the cabin filter on Daewoo Matiz: 5 good reasons
Salon filter is not just a “vacuum” but a barrier that protects your lungs from microparticles, bacteria and harmful gases. In urban conditions (especially in megacities), it is clogged 2-3 times faster than manufacturers indicate. Here’s what happens when you ignore the replacement:
- 🚗 Deterioration of the microclimate in the cabin: dust, pollen, exhaust gases penetrate inside, causing coughing, sneezing and irritation of the mucous membranes. It is especially dangerous for children and allergic people.
- 💨 Decreased efficiency of stove and air conditioning: polluted filter blocks the flow of air, which in winter the cabin warms up longer, and in summer the air conditioner works "idle".
- 🦠 Bacteria and mold reproduction: A wet filter becomes an ideal environment for fungi that cause a persistent musty smell.
- 🔊 Extraneous noiseWhistling or humming when the fan is running is a sign that the filter has deformed or clogged to a critical condition.
- 💰 Additional costsIgnoring the replacement leads to a fan breakage or clogging of the air conditioner evaporator (cleaning it will cost 5-10 times more than a new filter).
The manufacturer recommends changing the cabin filter to Matiz every 15,000 km or once a year. However, in the realities of Russian roads (with their dust, salt and reagents), this interval is better to reduce to the maximum of the maximum. 10,000 km or every 6 months. If you often drive on dirt roads or live in an industrial area, check the filter every 3-4 months.
⚠️ Attention! Nana Daewoo Matiz The first generation (M100, 1998-2005) cabin filter is often absent from the factory. If your car is not there, it is not a reason to rejoice, but a signal to urgent installation! Without a filter, dust and dirt settle directly on the heater, reducing its lifespan.
Which cabin filter to choose for Matiz: coal or ordinary?
There are hundreds of filters on the market for MatizBut they all fall into two main categories: common and coal-fired. Which one to choose? It all depends on your priorities and operating conditions.
| Type of filter | Advantages | Deficiencies | Term of service | Average price, rubles |
|---|---|---|---|---|
| Normal (dust) | It traps dust, pollen, soot. Low price, suitable for urban driving. | It doesn't protect against gases and smells. It quickly clogs in conditions of high dust. | 6–12 months | 200–500 |
| Coal | It absorbs harmful gases (including exhaust), neutralizes odors. It is optimal for megacities and allergies. | More expensive than usual by 30-50%. It requires more frequent replacement (coal loses its properties over time). | 6-9 months | 400–900 |
| Coal with antibacterial impregnation | Additional protection against bacteria and mold. Suitable for humid climates. | The highest price. The effectiveness of impregnation is controversial (requires confirmation by certificates). | 6 months | 800–1 500 |
For most owners Matiz The best choice will be coal filter of the middle price segment (e.g., Mann CU 22003, Bosch 1 987 429 666 or Filtron K 1152A). They provide a balance between price and quality of cleaning. If you live in an environmentally friendly region, you can limit yourself to a regular filter (for example, a filter). Mahle LA 230 or SCT SA 1039).
Important: The Matiz M200 (2005-2015) and M300 (2011-2020) have different size filters installed! Before buying, specify the year of issue and curl up the catalog (for example, on the Exist.ru or Emex.ru).
Where is the cabin filter on Daewoo Matiz: photos and diagrams
Unlike many modern cars, where the filter is hidden behind the glove compartment or under the hood, the Matiz Its location depends on the generation of the model. Below are detailed diagrams for each option.
1. Matiz M100 (1998–2005)
In the very first versions, the filter is often absent from the factory. If it is established, it is under-panel. To get to it, you need to:
- Remove the plastic lining under the "torpedo" (holds on 3-4 clips).
- Unscrew the screw (if any) and pull the filter cover on yourself.
2. Matiz M150/M200 (2005–2015)
Filter positioned glove-box. Access to it opens after removing the glove compartment (held on 4 plastic clamps). The filter cover is usually black, with the inscription AIR FILTER.
3. Matiz M300 (2011-2020, restyling)
Filter moved. engine-blocknear the windshield on the passenger side. The lid is attached to two latches. This is the most convenient location for self-replacement.
⚠️ Attention! On some versions Matiz M200 (especially in complete sets without air conditioning) the filter may be physically absent, but space is provided for it. In this case, it is recommended to buy and install it yourself - it will take no more than 20 minutes.
Step by step instructions for replacing the cabin filter with Matiz
The process of replacing the filter Daewoo Matiz It is simple but requires care, especially when working with plastic clips. Below is a universal instruction suitable for all generations (taking into account the nuances of the location).
Tools required:
- 🔧 Screwdriver cross (for M100/M150).
- 🔧 Plastic spatula or flat screwdriver (for clipping).
- 🧹 A vacuum cleaner or brush (to clean the case).
- 📦 New filter (check compatibility!)
Procedure:
- PreparationPark the car on a flat surface, turn off the engine and open the glove compartment (if the filter is there). For the M300, raise the hood.
- Removal of glove compartment (for M150/M200):
- Click on the side locks of the glove compartment (they are located inside, closer to the door).
- Put the glove compartment down - it will be removed from the guides.
- Disconnect the lighting connector (if any).
- Access to the filter:
- For M100Remove the pad under the panel (carefully slap the clips with a screwdriver).
- For M150/M200: Behind the glove compartment you will see a black plastic cover with the inscription
AIR FILTER. - For M300: in the engine compartment, find a plastic cover next to the windshield.
- Removing the old filter:
- Open the lid (it can be mounted on latches or screws).
- Pull out the old filter by pulling it over yourself. Be prepared for dust, wear a mask!
- Clean the filter body with a vacuum cleaner or a wet cloth.
- Check the direction of the arrows on the filter (should indicate) downward, as the air moves.
- Insert the filter to the point, making sure that it does not bend.
- Close the lid and lock it.
- Assembly: Install the glove compartment (or patch) in place, check the oven / air conditioner.
The year of production and the model Matiz (M100/M150/M200/M300) are tested |
The correct size filter (VIN or catalog conciliation) |
Tools prepared: screwdriver, spatula, vacuum cleaner |
Cleared area around the garbage filter |
Battery is disabled (optional, for safety)
Video instruction (for clarity):
⚠️ Attention! Nana Matiz M300 When installing the filter in the engine compartment, make sure that the sealing rubber of the cover lies flat. If it is skewed, unfiltered air will enter the cabin, and the entire replacement will lose its meaning.
If you find leaves, insects or mold inside the body when removing the old filter, treat the cavity with an antibacterial spray (for example, Liqui Moly Klima-Anlagen-Reiniger). This will eliminate odors and prevent bacteria from multiplying.
Common mistakes when replacing the cabin filter with Matiz
Even a simple procedure like changing a filter can be problematic if you make one of these mistakes. We've collected. TOP-5 missesThe ones most often made by owners Matiz:
- 🔄 Upside-down filter installationIf you confuse the direction of the arrows, the cleaning efficiency will drop by 30-40%. Always check the markings!
- 🔧 Strength in removing glove compartment: plastic fixtures break if you pull the glove compartment sharply. Press on the side walls to loosen the clips.
- 🧹 Ignoring the cleaning of the shellIf you do not remove dust and debris from the cavity, the new filter will clog 2 times faster.
- 🚫 Buying a "universal" filterCheap non-original filters often don’t fit in size, leaving gaps.
- 💨 Forgetting to check the oven's work: After replacement, turn on the blowing to the maximum - if there is a whistle, the filter is installed incorrectly.
Another common problem is that filter-deformation 1-2 months after replacement. It's because of:
- A loosely closed cover (air passes by the filter, creating excessive pressure).
- Use a filter with a soft frame (it bends under air pressure).
- Moisture intake (for example, when washing under the hood on the M300).
What if a whistle appears after the filter is replaced?
Whistling or hum when the fan is working is a sign that the filter is not installed tightly or covers the duct. Decision:
1. Check if the filter frame has bent (take it straight carefully).
2. Make sure the filter cover is closed before clicking.
3. If the whistle is still there, try another filter (possibly a defect or a mismatch in size).
How to prolong the life of the cabin filter: 7 practical tips
Even the best filters will last longer if you follow the simple guidelines. These tips are particularly relevant to Matizwhere the cabin filter often works in extreme conditions (dust, humidity, temperature changes).
- 🌿 Regular cleaning of the body: once every 3 months, spread the filter cavity, even if no replacement is planned.
- 🚿 Avoid washing under the hood for M300): water on the filter reduces its service life by 2 times.
- 🚗 Park in the shade: Under direct sunlight, the plastic of the filter body becomes brittle.
- 💨 Use recycling.In traffic jams or dusty conditions, turn on the recycling mode to reduce the strain on the filter.
- 🛠️ Check the seals.: if the gum on the filter cover cracked, replace it (costs a penny, but prevents the sucking of dirt).
- 🌡️ Watch the humidity.: if the filter is wet (for example, due to condensation), dry it with a hair dryer cold-blown.
- 📅 Keep a replacement logWrite down the date and run for each replacement so you don’t miss the deadline.
If you often drive on dusty roads, you can install prefilter A grid made of synthetic material that traps large particles before they reach the main filter. These pre-filters are sold on AliExpress or in the shops of tuning and cost from 300 rubles.
The carbon filter loses its absorbent properties after 6–9 months, even if it looks clean. After that, it begins not to clean, but on the contrary - to release the accumulated gases back into the cabin!
Cost of replacing the cabin filter: independently vs service
One of the main advantages Daewoo Matiz - low cost of maintenance. Replacing the filter is no exception. Let’s compare how much the procedure will cost in different versions:
| Replacement option | Filter cost, rubles | Cost of work, rubles | Total, roubles. | Time. |
|---|---|---|---|---|
| Self-contained (normal filter) | 200–500 | 0 | 200–500 | 10-15 minutes |
| Self-contained (carbon filter) | 400–900 | 0 | 400–900 | 10-15 minutes |
| Official service (dealer) | 600–1,200 (original) | 500–800 | 1 100–2 000 | 30–60 minutes |
| Informal service | 300-800 (analogue) | 300–500 | 600–1 300 | 20-40 minutes |
| Express Replacement (Mobile Service) | 400–1 000 | 400–700 | 800–1 700 | 15-30 minutes |
As you can see from the table, Replacement alone saves up to 70%. cost. At the same time, the risk of breaking something is minimal - the main thing is not to rush and follow the instructions. If you are not sure of your abilities, you can order. mobile-master (Many services offer outbound filter replacements.) It is cheaper than going to the service station, and takes no more time than an independent procedure.
Should I pay more for the original filter? For Matiz This is not a matter of quality (or quality).Mann, Bosch, Filtron) not worse, but they are 1.5-2 times cheaper. The exception is if you are driving under warranty and are afraid of problems with the dealer.
FAQ: Frequent questions about replacing the cabin filter with Matiz
Can I drive without a filter?
Technically yes, but it is not recommended. Without a filter, dust, leaves and insects will fall directly onto the oven’s radiator, leading to clogging and expensive repairs. In addition, the cabin will penetrate unfiltered air from the street, which is harmful to health.
How do you know if the filter is time to change?
Main features:
- The efficiency of the blowing has decreased (the oven or air conditioner blows weaker).
- In the cabin appeared a persistent smell of dust or mold.
- When the fan is turned on, a whistle or hum is heard.
- On the filter (if you get it) you can see a layer of dust thicker than 2-3 mm.
Can I wash the filter instead of replacing it?
Conventional dust filters are useless to wash - they consist of paper, which is deformed when wet. Coal filters are also not subject to washing, as coal loses its absorbent properties. The exception is special washable filters (for example, synthetic fiber), but they are rarely suitable for the use of a filter. Matiz.
What are the differences between the M200 and M300 filters?
The main difference is size and location:
- M200: filter is rectangular, installed behind the glove compartment. Size: ~200×150×30 mm.
- M300The filter is longer and narrower, located in the engine compartment. Size: ~250×100×25 mm.
Before buying, check the catalog by VIN or year of release!
Why did the filter change the stove?
Probable reasons:
- The filter is installed incorrectly (up/down or front/back mixed).
- The filter cover is not closed tightly (air sucking).
- The heater is clogged (washing is required).
- Broken fan oven (needs diagnosis).
Check the filter installation and repeat the procedure if necessary.