Installing TROCOT curtains with magnets: video instructions and tips

Protecting the car interior from the scorching sun, prying eyes and insects is a task that every driver faces. Frame curtains became a modern and aesthetic solution, and the brand TROCOT has established itself as one of the leaders in the market. Installing TROCOT curtains with magnets, the video you are often looking for, is actually a simple process that does not require special skills or tools.

Unlike classic suction cups, the magnetic fastening provides a more reliable fixation and allows you to quickly remove the curtains if necessary. However, in order for the system to work perfectly and not spoil the appearance of the car, it is important to know several installation nuances. In this article, we'll walk you through the entire process, from unboxing to final adjustments, so you can enjoy comfort on the road.

Many car owners mistakenly believe that installing magnetic curtains will require drilling into the body or using aggressive chemicals. This is wrong. Magnetic curtains They are attached to special self-adhesive pads that adhere securely to the metal. The main thing is to properly prepare the surface and choose a place for installation, which we will talk about later.

Preparing for installation: what you need to know before you start

Before proceeding with installation, you need to make sure that the surfaces where the magnetic pads will be glued are clean and dry. Any dust, grease or polish residue can significantly reduce the adhesion of the adhesive, which will lead to the elements peeling off during use. It is recommended to degrease the installation areas with an alcohol solution or a special plastic and metal cleaner.

It is important to determine in advance which windows you plan to close. Most often, curtains are installed on the rear side windows and the glass of the fifth door (for hatchbacks and crossovers). Covering the windshield with frame curtains while driving is prohibited by traffic regulations, as they limit visibility.

Make sure it comes with your curtains TROCOT All the necessary elements are included: the frames themselves with the mesh, magnetic counter parts and adhesive bases. Manufacturers sometimes supply additional magnets to enhance hold in windy conditions or at high speeds.

• 🧼 Thoroughly clean and degrease the window frame with solvent or alcohol.
• 🌡️ Carry out work at an air temperature of at least +15°C for better glue polymerization.
• 🚗 Determine in advance the top and bottom parts of the curtain for each door.
• 📏 Try on the frame without removing the protective film from the adhesive to find the perfect place.

⚠️ Attention: Do not use aggressive solvents such as acetone or gasoline on plastic elements of the door frame, as they can damage the structure of the plastic or wash off the paint.

Required tools and materials

To install curtains TROKOT you don't need a complex professional tool. The entire process can be completed using a minimal set that can be found in any motorist’s garage. The main attention should be paid to the quality of degreasing, since 90% of the success of the entire operation depends on this.

If you plan to install curtains on all windows at once, it makes sense to invite an assistant. One person will hold the frame, aligning it along the contour of the window, and the second will fix the magnets or control the evenness of the installation. This is especially true for large windows in minivans or SUVs.

It is important that all tools are clean and dry. It is unacceptable for lint from rags or dust to get under the adhesive layer. It is also worth preparing a soft rag to remove excess glue if it accidentally protrudes beyond the edges of the pads.

Step-by-step instructions: how to glue magnets correctly

The most important stage is gluing the reciprocal magnetic parts to the car body. A mistake at this stage can lead to the curtain not fitting tightly or, conversely, puffing up. First, try on the curtain itself to the window, pressing it tightly against the seal, and with a marker (carefully, if you are afraid of getting it dirty, you can use masking tape as a template) mark the places where the magnets should be.

Typically, magnets are located at the corners of the curtain and in the middle of the long sides. Remove the protective film from the adhesive layer of the magnetic pad. Place it exactly along the markings and press firmly for 10-15 seconds. Don’t let go right away, let the glue “grab.”

After installing all the platforms, do not rush to hang the curtain. Allow the adhesive to dry for the time specified by the manufacturer (usually 1 to 24 hours) before stressing the joints. If you start using curtains right away, there is a high risk of the magnets moving.

Mounting type	Glue drying time	Installation temperature	Difficulty
Standard magnet	2-4 hours	+15...+25°C	Low
Reinforced magnet	12-24 hours	+20...+30°C	Average
Mini magnet	1-2 hours	+10...+25°C	Low

Installing a curtain on a door window

When the magnets are securely fixed to the body, you can proceed to installing the curtain itself. Take the frame TROCOT and carefully bring it to the window. Thanks to the magnetic field, the curtain itself will “magnetize” to the installed pads, if you have correctly determined their location.

First secure the top corners, then the bottom. Make sure that the mesh is stretched evenly, without folds or sagging. If you notice a distortion, carefully detach the curtain and check whether the mating parts are glued evenly to the body. If necessary, you can adjust the position of the magnets, but this must be done before the glue has completely dried.

Check the operation of the window regulator. The curtain should not interfere with the full lowering and raising of the glass, and should not rub against the mechanism when moving. Some vehicle models may require minor adjustments to the position of the magnets toward the edge of the frame.

⚠️ Attention: When closing a door with the curtain installed, be careful. Make sure that the edge of the frame does not get between the door and the body, otherwise you may damage the mesh or deform the frame.

Once installed, it is recommended to open and close all doors several times to ensure there are no conflicts with body components. The magnetic connection must be strong enough to withstand the door slamming at medium speed.

Nuances of installation on the rear window and the fifth door

Installing curtains on the rear window of a sedan or on the fifth door of a hatchback has its own characteristics. More complex geometry is often used here, and magnets can be located not only around the perimeter, but also in the central part, if the design of the curtain requires it.

For the windows of the fifth door, it is important to take into account the operation of the wipers. The curtain should not block their movement or block the view through the central part, unless this is provided for by the design. Some models TROKOT They have special cutouts for wipers, which must be taken into account when positioning.

What to do if the magnets are weak?

If standard magnets are not enough to reliably hold the curtain at high speed, you can purchase additional neodymium magnets and strengthen the structure by placing them in inconspicuous places of the frame.

On large glass areas, the wind load when the car is moving is higher, so the requirements for the quality of magnet gluing increase. It is recommended to use the full set of fastenings included in the kit and not skimp on the number of fixing points.

Frame curtain care and maintenance

In order for curtains to last a long time and maintain a neat appearance, they need to be properly cared for. The mesh fabric is easy to clean, but requires delicate handling. Regular cleaning of dust will extend the life of the material and maintain its elasticity.

When washing a car, try not to direct a high-pressure jet of water (Kärcher) directly into the joint between the frame and the mesh under strong pressure, so as not to damage the adhesive joint or peel the fabric from the frame. It is better to wipe them with a soft sponge and soapy water.

• 💧 Use warm water and a mild detergent to clean.
• 🚿 Do not use abrasive brushes or aggressive chemicals.
• 🌞 For the winter, it is better to remove the curtains and store them in a dry place so that the frost does not make the fabric brittle.
• 🧽 Periodically wipe the magnets with a dry cloth to prevent metal dust from accumulating on them.

⚠️ Attention: If you remove curtains for the winter, store them unfolded or in a special bag-cover. Folding like an accordion can lead to creases in the mesh that cannot be straightened out.

Frequently asked questions (FAQ)

Do magnetic blinds interfere with your view in the rearview mirror?

No, if the curtains are installed correctly and have the appropriate model for your car. The mesh has high transparency (usually about 50-60%), which allows you to see what is happening behind you, especially during daylight hours. However, visibility may be limited at night, so it is best to remove the blinds when parking in the dark.

Is it possible to drive with the front windows closed?

According to traffic regulations in many countries, the light transmittance of the windshield and front door glass must be at least 70%. Frame blinds typically have less transparency, so using them on the front side windows while driving may result in a fine. There are no restrictions on rear windows.

How to remove magnets from the body without damage?

Use a hair dryer to remove magnetic pads. Heat the adhesive base with hot air for 1-2 minutes, the glue will soften, and you can carefully pry off the pad with a plastic card or your fingernail. Glue residues can be easily removed with a special spray or alcohol.

Will TROCOT curtains withstand being washed in a car wash?

Yes, high-quality frame curtains can withstand contact with water. However, a powerful jet of water at a right angle can damage the mesh or peel off the magnets if the glue has not yet reached full strength. It is recommended to notify the washer or wipe the curtains manually.