“Super-Auto” seats for VAZ 2114: how to choose, install and improve

Grinding, sagging, or worn front seat upholstery on VAZ 2114 - a typical problem after 100+ thousand kilometers, especially if the car was used in a taxi or with heavy drivers. Super-Auto seats (series 2114-8101010 and 2114-8102010) are positioned as a budget alternative to the original ones, but their quality depends on the batch and correct installation. If after replacement the backrest becomes loose and the cushion sags after a month, it’s not a matter of the brand, but a violation of the installation technology or incompatible fasteners.

Owners 2114 “Super-Auto” is often confused with a counterfeit under this name: the original seats have a stamped logo on the metal frame and a certificate RST-RU.AYU58.V.00396. Counterfeits are sold without documentation, with thin upholstery and weak springs. Before buying, check the compatibility of the mounting holes - on “four” models before 2007 they may differ by 5–7 mm.

Why “Super-Auto” seats are suitable for VAZ 2114

Seat design Super-Auto repeats the original geometry VAZ 2114, but with improved ergonomics: the back angle is increased by 3°, and lateral support is enhanced due to additional bolsters. This reduces fatigue on long trips, but can create discomfort for drivers with a larger build. Important: heated models (2114-8101010-10) require connection to the on-board network via a relay - it cannot be connected directly to the cigarette lighter due to the risk of overheating of the wiring.

According to reviews from owners, the main advantages of “Super-Auto”:

• 🔧 Compatibility with native sleds - no need to drill new holes.
• 💺 Reinforced frame made of steel with a thickness of 1.8 mm (versus 1.5 mm for the original).
• 🔥 Velor-plus upholstery - less easily soiled than standard velor VAZ.
• 💰 The price is 1.5–2 times lowerthan the original seats from AvtoVAZ.

However, there are also disadvantages: the seat cushion can sag after 1.5–2 years with intensive use, and the height adjustment mechanism (if there is one) often gets jammed from dust. To extend service life, it is recommended to lubricate the slide guides with silicone grease every six months Liqui Moly Silicone-Spray.

How to distinguish an original from a fake

Fake seats Super-Auto externally copy the original, but have critical differences:

1. Not on the frame engraving with article number (must be laser-etched).
2. The upholstery is sewn threads of contrasting color (in the original - to match the fabric).
3. Springs in the pillow thinner than 4 mm (the norm is 4.5–5 mm).
4. Not included product data sheets with the factory seal.

To avoid being scammed, buy only from authorized dealers or check the certificate through the website super-avto.ru/verify. Counterfeits are often sold under the guise of “replicas” or “analogs” at prices 20–30% lower than the market price.

⚠️ Attention: If the seller claims that the Super Auto seats are suitable for VAZ 2115 without modifications it is a fraud. U 2114 and 2115 different backrest mounts, and the brackets will need to be welded.

Step-by-step instructions for replacing seats

To replace the front seats with VAZ 2114 you will need:

• 🔧 Socket wrench on 13 mm (for attaching the slide).
• 🔧 Head on 10 mm (for adjusting mechanisms).
• 🧴 WD-40 - if the bolts are soured.
• 🧲 Magnet for fastening (so as not to lose the nuts in the cabin).

Algorithm of actions:

1. Disconnect the negative terminal of the battery.
2. Move the seat all the way back and remove the plastic plugs from the guides.
3. Unscrew the 4 bolts securing the slide (2 front, 2 rear).
4. Disconnect the heater connectors (if equipped) and the seat belt sensor.
5. Remove the old seat and install the new one in reverse order.

Make sure that the new seat slides are the same width as the original ones|Check the operation of the height adjustment mechanism (if there is one)|Apply grease to the guides|Connect the heating through the relay, and not directly-->

After installation, check:

• 🔄 Smooth movement of the seat on the slide (there should be no jerking).
• 🔒 Fixing the backrest in extreme positions (doesn’t it get loose).
• 🔌 Heating work (heating should be uniform).

⚠️ Attention: If after replacement the light comes on Airbag on the dashboard - it means you forgot to connect the passenger presence sensor connector under the seat. On VAZ 2114 Since 2008, this sensor influences the deployment of the airbag.

Tuning “Super-Auto” seats: 5 ways to improve comfort

Even new seats can be modified to suit your needs. Here are the proven tuning options:

Upgrade method	What you will need	Cost, ₽	Effect
Installing side support	Polyurethane foam pads, glue 88-NT	1 200–1 800	Better grip in corners
Replacing upholstery with leatherette	Set of covers Alcantara, stapler	3 500–5 000	Easy to clean, does not fade
Additional sound insulation	Splen 4 mm, vibration isolation Bimast Bomb	2 000–2 500	Reducing squeaks
Installation of pneumatic lumbar support	Pump DriveComfort, tubes	4 500–6 000	Adjustable back stiffness
Base lighting	LED strip SMD 5050, power supply 12V	800–1 500	Aesthetics + foot lighting

To install pneumatic support, you will need to drill a hole in the backrest frame (diameter 8 mm) and secure the pump under the seat. Do not use compressors from trucks - they create excessive pressure and can tear upholstery seams.

How to sew covers with your own hands

1. Take measurements from the seat (length, width, backrest and cushion height).

2. Buy leatherette with a margin of 10-15% for seams (optimal thickness - 1.2 mm).

3. Use threads Gütermann Tera 40 — they do not tear when stretched.

4. To sew hard-to-reach places (for example, a headrest), use a curved needle bar.

Typical problems after installation and their solutions

Even properly installed Super Auto seats can cause discomfort. Let's look at the most common complaints and ways to eliminate them:

• 🔊 Creak when moving - the reason is the friction of the plastic guides. Solution: disassemble the slide, apply graphite grease to the plastic Molykote G-Rapid Plus.
• ⚖️ Uneven pad wear - occurs due to improper weight distribution. Solution: install an additional spring plate under the seat (part no. 2114-8101020).
• 🔥 Preheat overheating - The thermostat does not work. Solution: replace the stock relay with Bosch 0332019150 (nominal 30 A).
• 🚗 The seat “walks” when braking — the fastening bolts have loosened. Solution: tighten the fasteners with a torque of 25–30 Nm.

If after replacing the seat there is steering play — the problem is not in the seats, but in the wear of the steering column bushings. This is a coincidence, but it is often confused with the consequences of installing new seats.

Creaks when moving|Sagging of the pillow|Heating does not work|Back play|No problems-->

Review of alternatives: which is better than “Super-Auto”?

If the seats Super-Auto not satisfied with the quality, consider alternatives:

Brand	Model	Pros	Cons	Price, ₽
Pilast	VAZ-2114-LUX	Anatomical shape, memory foam	Dear ones, it’s difficult to find in the regions	18 000–22 000
Autocomfort	AK-2114-Sport	Reinforced lateral support	Tough for everyday driving	14 000–16 000
Original (AvtoVAZ)	2114-8101010-00	100% compatible, durable	High price, often counterfeited	25 000–30 000
Titan	T-Sport 114	Lumbar adjustment, heating	Requires modification of fastenings	20 000–24 000

For VAZ 2114 with body hatchback it is better to choose seats with a shortened cushion (for example, Autocomfort AK-2114-Short), otherwise they will rest against the rear partition at maximum rollback.

Maintenance and service life extension

To make Super-Auto seats last longer than 3-4 years, follow the recommendations:

• 🧼 Upholstery cleaning: use foam Autoglym Interior Shampoo (do not apply directly to fabric - only to brush).
• ☀️ UV protection: Spray the covers once a season 303 Aerospace Protectant.
• 🔧 Mechanism lubrication: Once a year, clean the guides from dust and apply CRC 2-26.
• 🚫 What to Avoid:
  • Do not dry the seats with a hairdryer - the velor will lose color.
  • Do not place heavy objects (such as tool bags) on the pillow.
  • Do not use bleach for cleaning.

If abrasions appear on the upholstery, they can be masked with a repair kit. Leather Repair Kit (also suitable for velor). To restore the shape of the pillow, use spring inserts (article 2114-8101030), which are inserted under the upholstery without disassembling the seat.

FAQ: Frequently asked questions about “Super-Auto” seats for VAZ 2114

1. Will seats from VAZ 2115 fit on 2114?

No, they have different backrest mounts. On 2114 the top brackets are narrower by 20 mm, and the metal will need to be welded.

2. Is it possible to install seats from a foreign car (for example, Toyota Corolla)?

Technically yes, but you will need to make adapter plates for the fasteners and modify the slide. The cost of remodeling often exceeds the price of the seats themselves.

3. Why did the seats become more difficult to move after replacing them?

The new skids are probably too tight. Loosen the fastening bolts (but not completely!) and apply dry lubricant to the guides Molykote D-321 R.

4. How much weight can the Super-Auto seats support?

The stated limit is 120 kg per seat. With more weight, the springs sag and the pillow loses its shape. For heavy drivers, it is better to choose a model with a reinforced frame (for example, Titan T-Sport Heavy).

5. Is it possible to paint the plastic elements of the seats?

Yes, but only with special paint for plastic (for example, MOTIP Dupli-Color). Pre-degrease the surface Anti-Silicone and apply primer Plastic Primer.