Stove in the sauna My Summer Car does not turn on if you forgot to install the damper in the chimney or did not connect the wires to the battery terminals, which is the most common technical mistake of beginners. Without the damper installed correctly, smoke will not escape and a missing electrical connection will prevent the heating element from starting. To successfully complete this stage of construction, it is necessary to strictly follow the installation sequence, starting from the foundation and ending with decorative elements.
The process of constructing a bathhouse requires accurate calculation of materials, since the lack of even one log or board can stop construction for an indefinite time. In the game, construction mechanics are implemented through a special workbench, where individual structural units are created. Carefully monitor the amount of resourcesso as not to constantly run to the store for refills.
After completing the main work, you will have to set up the interior space, install lighting and make sure the room is airtight. A properly assembled sauna will be an excellent place to relax after engine repair. Satsuma. Below we will analyze in detail each stage, from the purchase of boards to the first launch of the furnace.
Preparation and purchase of necessary materials
The first step towards your own steam room is a trip to the store Teimo's, where you need to purchase a complete set of building materials. The basis of the structure is logs, boards and insulating materials, which are sold in packs. It is optimal to buy materials with a reserveto be able to correct errors when cutting or assembling.
To transport heavy loads, you will need a reliable vehicle. If your Satsuma If you are not yet ready to transport long items, you can use a bicycle with a trailer or ask your neighbors for help. It is important to properly distribute the cargo in the trunk so that it does not fall out while driving on a dirt road.
The list of required materials includes not only wood, but also metal fastening elements, insulation and components for the roof. Plywood will be needed to create internal partitions and shelves. Don't forget to buy tools if you haven't already, as assembly won't be possible without them.
- 🪵 Logs and boards of various sizes for frames and sheathing.
- 🔩 Metal corners, nails and screws for fastening elements.
- 🧱 Bricks or concrete blocks for the base of the oven.
- 🛡️ Insulating materials to protect walls from heat.
⚠️ Attention: When transporting materials on the roof of a car, make sure they are securely secured with straps, otherwise you risk losing the load when turning.
Creating the foundation and frame of the building
Construction begins with laying the foundation, which must be level and strong. B My Summer Car For this purpose, concrete blocks are used, which are installed along the perimeter of the future building. Accuracy of block installation critically important, since a skewed foundation will lead to problems when assembling the walls.
After installing the support blocks, the lower frame is assembled from logs. This is the base on which the vertical frame posts will be installed. Use a level to check that the structure is level before moving on to the next step. Errors at this stage are difficult to correct without complete disassembly.
Vertical posts are installed with a certain pitch, which provides the necessary rigidity of the structure. Cross members are mounted between the racks, forming cells for future insulation. The frame must be stable and withstand the weight of the roof and snow load in winter.
☑️ Foundation Checklist
Installation of walls and roof
The walls are assembled by installing ready-made sections or element-by-element installation of boards, depending on the selected drawing. In the game, the most common option is to assemble from ready-made panels that are created on a workbench. Wall panels should fit tightly together to prevent drafts.
The roof of the sauna requires special attention, as it protects the room from precipitation. The roof structure can be single-pitch or gable, which affects the consumption of materials and the complexity of installation. For covering, roofing felt or metal tiles are used, which also must be purchased in advance.
During the process of installing walls, do not forget to leave openings for doors and windows, if they are provided for in the project. Window frame inserted after the sealant has completely dried or the fasteners have been fixed. Proper installation of windows and doors will ensure heat retention inside the room.
| Design element | Material | Quantity (approximate) | Tool |
|---|---|---|---|
| Walls | Boards/Logs | 4 sections | Hammer/Saw |
| Roof | Boards/roofing felt | 2 ramps | Nails |
| Gender | Boards | For the entire area | Saw |
| Insulation | Minvata | As needed | Knife |
Installation of the stove and chimney system
The heart of any sauna is the stove, which My Summer Car requires careful assembly and connection. The stove is installed on a specially prepared base made of refractory materials. Safe distance from the wooden walls to the stove must be strictly followed to avoid fire.
Chimney assembly is a critical stage on which draft and operational safety depend. The chimney pipes are connected in series, and the joints are sealed. Pay special attention to the passage of the chimney through the roof, using a passage assembly and insulation.
The most important element is the damper, which regulates traction. If the damper is not installed or closed, carbon monoxide will not escape, which will lead to smoke in the room. Make sure the damper is installed in the chimney before you start lighting the stove.
Tip: Before starting the stove for the first time, check the draft by holding a lit match or piece of paper near the chimney. The flame should deflect towards the pipe.
Electrification and lighting
For the heating element of the stove and lighting to work, it is necessary to connect to the electrical network. In the game, this is implemented by connecting wires to the battery or generator. Connection diagram quite simple, but requires care when connecting contacts.
Wires are laid from the power source to the sauna and connected to terminals indoors. Don't forget to install a switch for easy control of lighting and heating. Using bare wires or improper connections may result in a short circuit.
Lighting in the sauna creates a cozy atmosphere and allows you to move safely in the dark. The light bulbs are installed in special shades that are protected from moisture and high temperatures. Check the operation of all electrical appliances before considering construction complete.
⚠️ Attention: Never leave the stove turned on unattended for a long time, especially if you are not sure about the correct installation of the chimney.
Interior arrangement and decor
After completing the construction work and checking all systems, you can begin the internal arrangement. The shelves in the sauna are arranged in tiers, allowing you to choose the optimal temperature. Wood shelves must be processed and free of knots so as not to cause discomfort.
Ventilation plays an important role in creating a comfortable microclimate. The vents must be positioned correctly to ensure the influx of fresh air and the outflow of exhaust air. Adjusting the ventilation flaps allows you to control the temperature and humidity in the room.
Decorative elements such as ladles, tubs and aromatic oils add realism and make the vaping experience enjoyable. Don't forget about brooms, which are an integral attribute of a real Russian bathhouse. Comfortable interior space is the key to quality rest.
Typical errors and their elimination
During the construction process, players often encounter a number of common problems that can complicate the operation of the sauna. One of the most common mistakes is the lack of insulation in the walls, which leads to the rapid cooling of the room. High quality insulation necessary to maintain temperature.
Another common problem is improper chimney assembly, (leading to) backdraft and smoke. Check all connections and make sure there are no gaps anywhere. The damper is also often forgotten, which makes using the stove impossible or dangerous.
If the oven does not heat, check the presence of electricity and the integrity of the heating element. The fuse may have blown or the contact has come loose. Careful diagnostics will allow you to quickly find and fix the problem, returning the sauna to operation.
Secrets of the perfect sauna
Use stones of a certain size for the stove to help them retain heat better. You can also experiment with the amount of water poured onto the stones to adjust the amount of steam.
Main takeaway: Building a sauna in My Summer Car requires patience and attention to detail, especially when installing the stove and chimney, as safety and comfort depend on this.
What materials are needed to build a sauna in My Summer Car?
To build, you will need logs, boards, plywood, insulation, nails, stove bricks, chimney pipes and electrical wires. A complete list is available in the blueprints on the workbench.
Why does smoke go into the sauna and not into the chimney?
This happens due to lack of traction. Check that the chimney damper is open and make sure that the chimney is not clogged. It is also important that the oven is preheated before active use.
How to turn on the light in the sauna?
The light is turned on via a switch inside the sauna, but you must first connect the wires from the power source (battery or generator) to the sauna's electrical system.
Is it possible to build a sauna without drawings?
Theoretically it is possible, but it will take much more time and resources. Workbench drawings streamline the process and allow you to create prefabricated sections, which greatly speeds up construction.