Comfort inside a modern crossover Belgee X50 directly depends on the quality of the climate system, and the central element here is the air filtration system. Many owners forget that it is this small consumable that protects the lungs of the driver and passengers from city dust, soot, allergens and unpleasant odors. Ignoring the condition of the filter leads not only to fogging of the glass, but also to increased load on the stove fan.
In this article we will analyze in detail which one Belgee X50 cabin filter It is better to choose for your region how often it needs to be changed and whether it is possible to carry out the replacement procedure yourself without contacting service. We will consider the technical nuances of the design, compatibility with Geely analogues and provide exact part numbers for ordering.
Timely replacement of the air purification element is a matter of not only hygiene, but also driving safety. Clean air in the cabin prevents drowsiness caused by lack of oxygen and keeps the windows clear in any weather.
The role and functions of filtration in the ventilation system
The main task of the air purification system in Belgee X50 is to create a barrier between the polluted external environment and the interior of the car. Standard paper filters trap coarse dust, pollen and poplar fluff, which inevitably enter the air ducts when driving along the highway or parking in a park.
However, for megacities with their complex traffic, they are more relevant carbon filters. Activated carbon in the filler adsorbs harmful gases such as oxides of nitrogen, sulfur and carbon, and also eliminates exhaust odors from cars in front. This is especially important for drivers who spend a lot of time in traffic jams.
⚠️ Attention: Using a cheap analogue with a low packing density can lead to the penetration of fine dust into the air conditioner evaporator. This causes mold to form and a persistent unpleasant odor that is difficult to eliminate.
In addition, a clean filter provides the necessary throughput air. If it is clogged, the stove fan begins to work with increased load, which can lead to its premature failure or blown power circuit fuse.
When choosing between a regular and carbon filter for the Belgee X50, always give preference to the carbon one if the price difference is not critical. They have a similar resource, but the comfort is much higher.
Service life and signs of contamination
Manufacturer Belgee, following Geely regulations, recommends replacing the cabin filter every 10,000 - 15,000 kilometers or once a year. However, the actual resource directly depends on the operating conditions of the vehicle.
If you often drive on dirt roads, live in industrial zones, or often sit in dense traffic jams, the replacement interval should be reduced to 5,000 - 7,000 km. Visual inspection and tactile testing will help determine the need for urgent replacement.
The main signs that filter element has exhausted its resource:
- 📉 A noticeable reduction in the power of air flow from the deflectors even at maximum fan speed.
- 💨 The appearance of foreign odors (dampness, burning, exhaust gases) when the recirculation mode is turned on.
- 💧 Frequent fogging of windows in wet weather, which does not go away for a long time.
- 🔊 Increased noise of the heater fan.
Ignoring these symptoms causes the ventilation system to become ineffective and moisture to accumulate in the air ducts, creating an ideal environment for bacteria to grow.
Selection of original and proven analogues
When selecting consumables for Belgee X50 It is important to consider that the car is technically a deep modernization of the Geely Coolray. Therefore, catalog numbers and seats often coincide with Geely models, which expands the selection of available spare parts on the market.
The original filter is usually marked according to the BMA platform. However, there are many high-quality analogues on the market from well-known manufacturers of automotive components, which often offer the best price-quality ratio.
The table below shows the main options suitable for installation:
| Type | Brand / Manufacturer | Article/Number | Features |
|---|---|---|---|
| Original | Geely / Belgee | 1013006395 (or equivalent) | Standard cleaning, medium dust capacity |
| Analogue (Coal) | MANN-FILTER | CU 24 003 | High degree of filtration, activated carbon |
| Analog (Paper) | Big Filter | GB-99100 | Budget option, good bandwidth |
| Analogue (Premium) | Bosch | 1 987 432 527 | Multilayer structure, protection against bacteria |
When purchasing, be sure to check the geometric dimensions. Filter dimensions must exactly match the seat, otherwise the system may leak, and the air will enter the cabin unpurified, bypassing the filter paper.
Is it possible to wash the Belgee X50 cabin filter?
No, washing any disposable filter (paper or carbon) is strictly prohibited. Water destroys the structure of the fibers and washes away the activated carbon. After drying out, such a filter will become a source of mold and will cease to perform its functions.
Preparing for replacement: tools and conditions
Replacing the cabin filter with Belgee X50 - a procedure that is accessible even to beginners and does not require complex tools or removal of the dashboard. The whole process takes no more than 15-20 minutes.
To work you will need a minimum set:
- 🛠️ Phillips screwdriver (for removing decorative elements, if necessary).
- 🧤 Clean gloves (so as not to stain your hands and the new filter).
- 🔦 Flashlight (for a better view of the installation area at the passenger’s feet).
- 🧹 Vacuum cleaner or compressed air (to clean the niche from accumulated dust).
It is recommended to carry out work in a dry room or garage so that rainwater or snow does not get inside the air ducts. Also, before starting the procedure, make sure that the car is turned off and the keys are out of the ignition.
☑️ Ready for replacement
Step-by-step instructions for DIY replacement
Replacement process Belgee X50 unified with many models of the concern. The filter unit is accessible from the front passenger side. First you need to open the glove compartment (glove box) and empty it of its contents.
Then you need to remove the glove compartment opening limiter. Usually this is a plastic retainer or cable on the right or left wall of the box. Squeezing the latches, carefully remove the glove compartment from the grooves so that it drops lower, opening access to the end of the heater unit.
Next, follow the algorithm:
- Locate the filtration unit cover. It is a plastic rectangular plug located vertically or horizontally at the end.
- Remove the cover by pressing the latches or unscrewing the mounting screws (depending on the specific configuration and year of manufacture).
- Carefully remove the old filter. Pay attention to the direction of airflow (air flow), indicated by the arrow at the end of the old element.
- Clean the niche from leaves and dust using a vacuum cleaner.
- Install the new filter following the direction of the arrow Air Flow. The arrow should point down or towards the cabin (depending on the design, usually arrow points down/towards the cabin).
- Replace the lid, glove compartment and latches.
⚠️ Attention: Never install the filter upside down. Disturbing the direction of air flow will dramatically reduce cleaning efficiency and may create a whistling noise when the fan operates at high speeds.
After assembly, turn on the fan at maximum power and check for any extraneous noise or air whistling at the joints of the filter cover.
The most common mistake when replacing is incorrect orientation of the filter. Always look at the Air Flow arrow: it should indicate the direction of air movement from the street to the cabin.
Typical mistakes and questions from owners
Often owners Belgee X50 are faced with a situation where, after replacing the filter, the air flow does not increase. This may be due to the fact that the protective shipping film was not removed from the new filter. Always check the packaging before installation.
Another common problem is the filter cap not fitting tightly. If it is not latched all the way, a gap will form through which untreated air from the street will be directly sucked into the cabin, nullifying the entire replacement procedure.
Some drivers try to use filters from other Geely models (for example, Emgrand 7), relying on the similarity of the platforms. However, the body geometry X50 may differ, and a filter from another model may simply not fit or hang out in a niche.
Is it possible to drive without a Belgee X50 cabin filter?
Short-term driving without a filter is acceptable (for example, to get to the store), but constant operation without it will quickly contaminate the heater radiator and air conditioner evaporator. This will cause expensive cleaning of the system and disassembly of the dashboard.
Why did the whistle appear after the replacement?
Whistling usually occurs due to gaps between the lid and the housing or because the filter is inserted crookedly and its edges are bent. Check the tightness of the lid and the evenness of the filter element.
How often should you change the filter if the car is parked in a garage?
Even if the car is not used much, the filter material ages and loses its properties over time. It is recommended to change it at least once a year, regardless of mileage, as the paper may become damp and the carbon may lose activity.
After installing the new filter, run the system for 5-10 minutes at maximum power in recirculation mode. This will help dry out any remaining moisture and stabilize the pressure in the system.
Regular maintenance of the ventilation system Belgee X50 is a simple way to maintain health and extend the life of your car’s climate control system. Do not neglect this procedure, and the salon will always be fresh and easy to breathe.