Drivers often notice that the button "Home" in the application Yandex Pro becomes active only under certain conditions, ignoring clicks the rest of the time. This feature is activated automatically when the system detects that you are in your home region or have completed your shift, allowing you to accept orders strictly on the way to your parking or overnight location. Without correctly setting up geolocation and selecting the end point of the route, the mode will not start, leaving the taxi driver without orders in undesirable directions.
The main task of this functionality is to optimize travel time and reduce idle mileage by directing the driver to the desired part of the city or suburb. If you are planning to finish your job or simply move to another area, you need to make sure that the navigator is set to an address that matches your actual location or direction of travel. Ignoring these parameters leads to the fact that the algorithms Yandex Taxi continue to distribute orders chaotically, increasing fuel consumption.
It is important to understand that Home mode is not a permanent setting that can be turned on once and forgotten. This is a situational tool, depending on the driver’s current status, time of day and fleet congestion in a particular area. Understanding the mechanics of its operation allows you to effectively manage the flow of orders and avoid traveling to “dead” areas from where it is difficult to return with a passenger.
Operating principle and activation conditions
Functionality "Home" in Yandex Pro works based on a complex algorithm that analyzes your current geoposition and the specified destination. The system will not turn on this mode just like that; it requires a signal that the driver wants to move in a specific direction. Most often, activation occurs when you place a point on the map in the navigator, and it is located at a considerable distance from the current point or in another administrative district.
To run the process successfully, certain technical requirements must be met. First of all, this is a stable Internet and accurate operation of the smartphone’s GPS module. If the satellite signal is weak, Yandex Pro may incorrectly determine your location, believing that you are already at your destination, and therefore will not offer specific orders.
⚠️ Attention: The mode may not activate if you are in an area with poor network coverage or if the application is temporarily undergoing maintenance on the server.
It is also worth considering that the algorithm takes into account the density of demand in the area. If you are heading to an area where there are already a lot of free cars, the system may not switch to Home mode, continuing to give regular orders to equalize the balance in the fleet. The driver must be patient or change the route slightly for the trigger to work.
For better geolocation performance, turn on the “High accuracy” or “GPS only” mode in your phone settings, disabling power saving for the Yandex Pro application.
Step-by-step instructions for turning on
To activate the desired direction of movement, you must perform a series of sequential actions in the application interface. First open Yandex Pro and go to the main screen, where the map and the button to connect to the line are displayed. Make sure you are logged in and your profile is active.
Next, you should use the built-in navigator. Click on the search bar or select a point on the map where you plan to go. This could be your home address or any other location. After building a route, the “Going home” option or a similar button often appears in the navigation interface, which needs to be confirmed.
☑️ Setting up Home mode
After confirmation, the system will rebuild the logic for issuing orders. Now Yandex Pro will prioritize trips that get you closer to your target point. If there are no orders in the direction, the application can temporarily suspend distribution while waiting for a suitable passenger, or offer an order with subsequent loading in the desired direction.
Setting up a home zone in your profile
For more efficient operation of the service, it is important to correctly indicate the address of residence in your personal account. This allows the system to understand in advance which direction is beneficial for you to move at the end of the shift. Go to the profile menu, usually this is a button with your photo or initials in the corner of the screen.
In the settings section, find the item responsible for personal data or address preferences. Entering the correct Home address helps the algorithms Yandex Activate the corresponding mode faster when you are close to the specified location. Don't neglect this step, as it affects long-term statistics and usability.
| Parameter | Description | Impact on work |
|---|---|---|
| House address | Exact residential address | Automatic activation of the mode in the area |
| Region of work | City or region | Determination of tariffs and coefficients |
| GPS status | Positioning accuracy | Correctness of route construction |
If you have changed your place of residence or temporarily moved to another area, be sure to update this information. Updated materials in your profile reduces the number of errors when distributing orders and helps you avoid situations where you are taken in the opposite direction from home.
Solution: the mode does not turn on
One of the most common problems is the situation when all actions have been completed, but Home mode it still won't activate. First, check to see if this feature is blocked in your park. Some taxi companies may restrict the use of certain tools for their drivers, although this is rare.
The second common cause is application data caching. Yandex Pro may retain old location or route data, interfering with switching. Try closing the application completely (unload it from memory) and start it again. Clearing the cache through the phone settings also helps.
⚠️ Attention: If the problem persists for a long time, it is possible that this function is temporarily unavailable in your city or tariff or is working in test mode.
It's also worth checking for updates to the app. In older versions Yandex Pro may contain errors corrected by developers in new releases. Go to your app store (Google Play or AppStore) and make sure you have the latest version.
Impact on rating and order distribution
Many drivers are concerned about how using the “Home” function affects ranking and the total number of completed orders. Officially algorithms Yandex claims that using this mode does not penalize the driver. However, in practice, the waiting time for an order may increase, since the selection is limited by the direction of travel.
If you are at rush hour and everyone is going to the center, and you set the direction “From the center”, there may be few orders. Conversely, at night, movement “Home” from the center to residential areas can be very effective. It is important to feel the balance and not overuse the filter during low demand hours.
Statistics show that drivers who use direction wisely often have higher efficiency factor (efficiency) per shift, since less time is spent on empty runs. This has an indirect impact on revenue, even if the number of orders per hour decreases slightly.
Secrets of effective use
Experienced drivers advise not to set the “Home” point immediately after entering the line if you are far away. It is better to work in the current area and turn on the mode 1-2 hours before the end of the shift.
Frequently asked questions (FAQ)
Can I turn on Home mode if I'm not in my city?
Yes, the function works in any city where it is available Yandex Pro. You just need to set the destination in the navigator, and the system will select orders in this direction, regardless of the region.
Why is the Home button gray and unclickable?
This means that the conditions for activation are not met. Check if the route is set in your navigator, if GPS is turned on and if you are on the line. Sometimes the button is unavailable during periods of technical failures.
Does this mode affect the completion of mandatory park tasks?
Home mode does not cancel mandatory tasks, but may slow down their completion if there are few suitable orders in the right direction. It is recommended to plan the activation of the mode taking into account the need to fulfill the conditions of the bonuses.
How can I quickly disable a mode if I no longer need it?
To disconnect, just remove the destination in the navigator or press the exit button and log in again. You can also change the direction of movement, and the system will rebuild the logic for issuing orders.