The exact frequency of Remix FM varies depending on your location, as the station uses a different FM waveband in each broadcast region. For successful setup car radio you need to know the specific megahertz allocated by the repeater in your city, since the automatic search does not always correctly determine the signal in the presence of strong interference or in an area of poor reception. An error in choosing a band (FM vs AM) or an inaccuracy of 0.1 MHz will result in you hearing only static noise or a nearby station instead of music.
In most large cities of Russia, the station occupies positions in the upper part of the ultrashort range, but the exact value may differ even within the same region. Setting the frequency correctly is critical to sound quality, as analog signal sensitive to detuning, which causes characteristic wheezing and interruptions. Below is the latest information on frequencies, manual tuning methods, and solutions to problems with reception quality on the road.
Broadcasting ranges and signal features
The radio station "Remix FM" broadcasts exclusively in the range ultrashort waves (VHF), which in automotive technology is labeled as FM (Frequency Modulation). This means that the search for a station must be done in this mode, ignoring the medium (MW) and long (LW) wave bands, where music broadcasting of this format is not carried out. The signal travels by line of sight, so terrain, high-rise buildings and tunnels can significantly affect reception stability, requiring fine tuning of the antenna or selection of an alternative frequency.
It is important to distinguish between two subbands used in the post-Soviet space: European (87.5–108.0 MHz) and Soviet/Japanese (65.0–74.0 MHz). Remix FM works in the European standard, so if your radio is set to the 65-74 MHz range, you physically will not be able to catch the station without switching the region in the head unit settings. Modern multimedia systems Usually the region is automatically detected, but older models may require manual activation of the 87.5–108 MHz range through the settings menu.
⚠️ Attention: Trying to set the frequency 100.0–106.0 MHz while in the 65–74 MHz range mode will not produce results and may throw off the remaining saved memory cells of the radio receiver.
The quality of reception directly depends on the condition of the vehicle's antenna path. If you know exactly what wavelength Remix FM has in your city, but the radio is noisy, the problem may lie in oxidation of the active antenna contacts or damage to the cable running from the glass or fender to the radio. Amplifying the signal using software methods will not help in this case; you need to check the physical connection.
Frequency table for Russian cities
Since the network covers many localities, the broadcast frequency is tied to a specific transmitter. In Moscow and the Moscow region, the main value is 106.6 MHz, however, in nearby satellite cities, repeaters can operate at other frequencies to avoid signal interference. St. Petersburg is characterized by a frequency of 106.3 MHz, and in Yekaterinburg the station can be found on 100.5 MHz. Below is a summary table of the main cities for quick setup.
| City | Frequency (MHz) | Range | Transmitter power |
|---|---|---|---|
| Moscow | 106.6 | FM | 5 kW |
| Saint Petersburg | 106.3 | FM | 4 kW |
| Ekaterinburg | 100.5 | FM | 2 kW |
| Nizhny Novgorod | 103.1 | FM | 1 kW |
| Kazan | 101.3 | FM | 1 kW |
If your city is not on the list, it is recommended to use the auto search function (Scan) on the radio, after selecting the FM band. In some cases, repeaters may temporarily change frequencies due to technical work, so you should check the latest information on the official website of the radio holding. Digital display on the radio display allows you to fix the exact value in steps of 0.05 or 0.1 MHz, which ensures better reception.
Regional features
In remote regions, the frequency may differ from the central one. For example, Crimea and Sevastopol use their own repeaters. Always check local frequency listings when traveling long distances.
Instructions for manually setting up the radio
Automatic station search (Scan or Auto function) often misses FM Remix if the signal is weaker than neighboring stations, or if the noise level exceeds the threshold. In such situations it is necessary to perform manual setting. To do this, go to radio mode, select the FM band and use the frequency buttons (usually indicated by arrows or) to set the value corresponding to your city (for example, 106.6). Turn the control slowly, listening to the noise level change.
After the station logo or a characteristic piece of music appears, fix the frequency in memory. To do this, press and hold one of the numbered buttons (1–6) for 2–3 seconds until a sound confirmation is heard. This will allow you to quickly switch to “Remix FM” in the future without searching again. On touch screens Android radio the procedure is similar: a long press on the “Favorites” icon saves the current frequency.
If the station is received intermittently, try turning on the function Local/DX (if available). Local mode reduces the tuner's sensitivity to distant stations, reducing the number of switches and interference in the city. In DX (long-distance reception) mode, the radio tries to pick up even weak signals, which in a metropolis leads to constant “throwing” between frequencies.
Reception problems and methods for eliminating them
A common problem for car owners is the disappearance of the “Remix FM” signal when stopping at a traffic light or driving under a bridge. This is due to the physics of radio wave propagation and signal shielding by metal structures. If signal drops occur constantly on the same frequency, there may be a powerful interference source operating in that location, or a neighboring station may be using a similar frequency, creating interference.
To improve reception, you can install an additional antenna amplifier or check the antenna grounding. Sometimes cleaning the contacts of the antenna plug inserted into the radio socket helps. Contact oxidation is a common reason why radio receiver loses sensitivity, and simply stripping the connector often returns high-quality sound without replacing equipment.
⚠️ Attention: Using low-quality antenna amplifiers can lead to overload of the radio tuner, which will cause even more severe sound distortion and whistling when the engine is running.
It is also worth considering that tinting windows with a metallized film significantly weakens the signal, since the metal screens radio waves. In such cases, only external antennas installed on the roof of the car are effective, since interior antennas and glass stickers cease to perform their function.
Using RDS for a comfortable listening experience
Modern radio stations, including Remix FM, transmit a digital RDS (Radio Data System) signal along with the main audio. This technology allows the radio display to display the track title, artist name and news in text form. For this function to work, you must activate the RDS mode in the head unit settings. If strange characters appear on the screen instead of the name of the song, it means that the signal level is too low to decode the digital stream, even if the sound is clear.
Function AF (Alternative Frequency) within RDS allows the radio to automatically switch to another frequency of the same station if you move out of the reception area of the current transmitter. This is especially useful on long trips along highways where Remix FM coverage is provided by different repeaters. Make sure that the AF option is enabled in the menu so that the music does not interrupt when changing locations.
Expert Tip: If RDS is displaying incorrect information or bugs, try turning RDS off and on again in Settings. Sometimes the decoder needs to be restarted to synchronize with the data stream.
In addition, the function Traffic Announcement (TA) allows you to interrupt music playback or navigation guidance with important traffic messages. Remix FM broadcasts such messages during peak hours, helping drivers quickly learn about traffic jams and accidents along the route.
Alternative ways to listen in a car
If the radio signal in your area is unstable or the quality of analogue broadcasting is not satisfactory, Remix FM is available via Internet radio. Many modern multimedia systems with Android or iOS support allow you to install a radio station application or use aggregators like Yandex.Music or TuneIn. In this case, the sound quality will depend not on the height of the antenna, but on the speed of the mobile Internet (3G/4G/LTE).
For older radios without smart functions, you can use Bluetooth adapters or FM transmitters. However, using a transmitter may be pointless if you want to listen specifically to the air wave, since the transmitter itself creates a radio signal. It is more rational to use an AUX cable by connecting your smartphone to the radio and start an online broadcast of the station through a browser or application.
Online broadcasting does not have the interference associated with radio waves, but does consume traffic. If you have an unlimited tariff, this is an ideal option for enjoying music at high bitrates without static noise and switching to other frequencies when traveling out of town.
Frequently asked questions (FAQ)
Why did Remix FM disappear after washing the car?
Water probably got into the antenna connector or damaged the active antenna built into the glass. Check the dryness of the contacts and the integrity of the wires. The range in the radio settings could also be lost due to a power surge or a reset.
Is it possible to listen to Remix FM abroad?
The station broadcasts mainly in Russia. In neighboring countries (Belarus, Kazakhstan), reception is possible in border areas. In non-CIS countries, only online broadcasting via the Internet is available.
How to improve reception in a garage or parking lot?
In underground parking lots and metal garages, FM radio reception is almost impossible due to signal shielding. The only option is to switch to online streaming via mobile internet if there is cellular coverage.
What to do if frequency 106.6 is received with noise?
Try to find an alternative repeater frequency in your city (see table above). If there are no alternatives, check the antenna amplifier and cable. In some cases, turning on the Mono mode in the radio settings helps, which reduces the noise level but removes the stereo effect.
Does tinting affect the quality of the radio?
Yes, the metallic tint film creates a shield that blocks radio signals. If you have tinting with a high metal content, you will need to install an external whip or active roof antenna to get good FM radio reception.
Main conclusion: For stable reception of Remix FM, it is critical to know the exact frequency in your region, use a working antenna and, if necessary, switch to online broadcasting in areas of poor signal.