Installation of a farcop on a passenger car is not only a matter of convenience, but also legal responsibility. According to the current legislation, any change in the design of the vehicle, including the installation of a traction coupling device (TCC), must be registered with the traffic police. Without this, you risk a fine of up to 5000 rubles or even lose your rights for 1-3 months if you re-infringe.
In this article, we will discuss the whole process in detail: from choosing a certified farcope to obtaining a new CTC with a note about the changes made. You will learn what documents will be required, how long the procedure will take, and how to avoid the typical mistakes that cause owners to be denied registration. We will pay special attention to the changes in 2026 – now for some categories of cars there are simplified rules.
If you plan to tow a trailer weighing more than 750 kg or carry goods on a farcope, registration becomes mandatory. Even for light trailers up to 750 kg, the presence of a decorated TSU will save you from claims from traffic police inspectors. Let’s start with the main thing – which farcopes can be installed legally, and which will lead to problems when registering.
What farcopes are subject to registration in the traffic police
Not all traction and coupling devices require mandatory registration. I agree. Technical Regulations of the Customs Union TR CU 018/2011Only those farcopes that change the design of the car are subject to registration. This concerns:
- 🔧 Stationary farcope Welded or bolt type, which are attached to the spars or frame of the car. They are considered an integral part of the design.
- 🚗 Removable farcopesif their installation involves drilling the body or modification of the standard anchorages.
- 🔄 Farcope with electric wiringconnected to the vehicle’s on-board network (even if the device itself is removable).
Here. squash-up (e.g., the Volkswagen Tiguan or Skoda Octavia) which do not require any structural intervention and are fitted in the manufacturer's specified openings need not be recorded. However, there is a caveat: if the PTS or CTS of your car is not marked about the possibility of installing a farcrow, even a standard mount may require legalization.
Before buying a farcope, check the certificate of conformity on the Rosstandart website. Devices without a certificate will not be registered with the traffic police, even if they are suitable for mounts.
Pay special attention maximum vertical load to the farcope. For passenger cars, it is usually 50-100 kg. Exceeding this value (for example, when transporting a heavy trunk) can lead not only to a fine, but also to the cancellation of the registration of the TSU.
Documents for registration of the farcope in the traffic police
For successful registration of the farcope, you will need to collect a package of documents. The absence of at least one of them will cause the refusal. Here's the full list:
- Vehicle passport (PTS) - original. There should be a free line for making changes.
- Certificate of registration of the vehicle (CTC) - original and copy.
- Passport of the owner of the car - to confirm identity.
- Declaration on the scope of work (Filled in the service center where the porcelain was installed).
- Certificate of conformity for farcope It must be valid and conform to your vehicle’s model.
- Technical expertise protocol (Unless the car is certified as a part of your car.)
- Receipt for payment of state duty 800 rubles for making changes to the PTS.
If the scoring was installed on its own, it will also be necessary Preliminary technical examination about the possibility of editing it. This examination is carried out by accredited laboratories, a list of which can be found on the website. Rusaccreditation.
What to do if there are no free lines in the PTS?
If your PTS ran out of free lines to make changes, you will first have to get a new form. To do this, contact the traffic police with a request for the issuance of a duplicate. The cost is 800 rubles, the production period is up to 30 days. Without a free line, the registration of the farcope will be impossible.
Important: if the farcop was installed in an uncertified service or by handicraft, you will be denied registration. Traffic police requires that the installation is carried out in the center, which has a license to work on changing the design of the vehicle.
Step by step instructions: how to register a farcope in the traffic police
The process of registration of the farcope consists of several stages. Let’s look at each of them in detail so you can avoid the typical mistakes.
1. Installation of a farcope in a certified center
The first step is to install the traction-coupling device. It is important to choose a service that:
- 🔧 He has. license (check the traffic police website).
- 📄 Provides work-proof with the master's seal and signature.
- 🔌 Correctly plugged in electric (if required) with the maintenance of the wiring.
The cost of installation varies from 3 000 to 10 000 rubles depending on the model of the car and the type of farcop. For example, for Toyota RAV4 or Kia Sportage With a frame structure, installation will be cheaper than for Sedana with a load-bearing body.
2. Passage of technical expertise
After installation, you must obtain technical examination. It is issued by accredited laboratories (list on the website). Rosstandart). The examination confirms that:
- 🔧 The farcop is installed without violating the safety of the car.
- 📏 Its parameters (mass, load) correspond to the characteristics of the vehicle.
- 🔌 Electrical wiring (if any) does not affect the regular systems.
The term of the examination is 1-3 days, the cost is from 2,500 to 5,000 rubles. For some foreign cars (e.g., Volvo or BMW) additional opinion on the maintenance of the guarantee may be required.
3. Submission of documents to the traffic police
With the collected package of documents, contact any traffic police department engaged in registration of the vehicle. The procedure looks like this:
Apply for changes to the design of the vehicle |Provide originals and copies of documents |Pay the state duty (800 rubles) |Go through the inspection of the car at the traffic police |Get a new CTC with a mark on the farcop-->
The car is inspected on a special site. The inspector checks:
- 🔧 The farcope's certificate.
- 📏 Correct fixing and no damage to the body.
- 🔌 The performance of the trailer lighting devices (if the electrician is connected).
If everything is in order, you will be given a new CTC with a note about the changes made. The PTS will have a record of the type: "Installed traction coupling device (farcope) certificate NoXXX".
Yes, I registered with the traffic police | Yes, but did not register | I plan to install | No, I do not plan | I don't know if I need->
How much does it cost to register a farcope in 2026
The total cost of registration of the farcope consists of several components. Below is a table with current prices for 2026:
| Service | Cost (rubles) | Notes |
|---|---|---|
| Installation of the farcope in the service | 3 000 – 10 000 | Depends on the car model and the type of farcope |
| Technical expertise | 2 500 – 5 000 | Accredited laboratory |
| The state fee for making changes to the PTS | 800 | Payment before visiting the police station |
| Certificate for farcope | 1 000 – 3 000 | The cost depends on the brand (for example, Bosal or Thule) |
| Declaration on the scope of work | 500 – 1 500 | Issued by a service center |
The minimum cost of registration of the porcelain will be 7,800 rublesand the maximum can be reached. 20,000 rubles (For example, premium cars with complex electronics).
Save on a certified farcop is not worth it - uncertified devices not only will not pass registration, but can also lead to emergency situations due to insufficient strength.
It should be noted that from 2026 for cars under 3 years old, a simplified procedure applies: if the farcop is installed in an authorized dealer service, technical expertise is not required. It is enough to provide a declaration from the service and a certificate for the device.
Fines for unformed farcope
The absence of a Pharmaceutical Registration is equal to Illegal modification of the vehicle design. I agree. Article 12.5 of the Administrative Code of the Russian FederationThe following penalties are imposed for this:
- 🚨 Primary violation: fine of 500 rubles (in part) 1 st. 12.5).
- 🚨 Repeated violation: fine of 5 000 rubles or deprivation of rights for 1-3 months (in part). 2 tbsp. 12.5).
- 🚨 Operation with a faulty farcope: fine of 1000-1 500 rubles (if the device is damaged or improperly fixed).
Important: if the traffic police inspector finds an unformulated porcelain, he has the right to remove state license plates until the violation is eliminated (Article. 27.13 of the RF Administrative Code). This means that you will not be able to operate the vehicle before you register.
In addition, in case of an accident with a trailer fixed on an unformulated farcope, the insurance company may refuse to pay for OSAGO or CASCO, citing a violation of the terms of the contract (illegal change in the design of the vehicle).
If you are stopped for an unformulated farcop, do not try to prove that it is “removable and does not require registration”. The inspector will check the mounts and the certificate. It is better to immediately admit the violation and issue the device within 10 days - so you will avoid a repeated penalty.
Frequent errors in the registration of the farcope and how to avoid them
Many owners face denial of registration due to mistakes made. Let’s look at the most common of them:
- Purchase of uncertified farcope. Even if the device is ideal for mounts, without a certificate it will not be registered. Check for a certificate. TR CTC (Customs union) or UNECE.
- Independent installation without examination. If you have mounted the farcop yourself, you will need a conclusion about the safety of the structure. Without him, registration will be denied.
- Laden mismatch. For example, if the farcop is designed for 75 kg, and you tow a trailer weighing 1 ton, this will be qualified as a violation.
- Lack of free line in the PTS. If all lines are filled, you will first get a duplicate of the PTS.
- Incorrect connection of electricians. If the lighting devices of the trailer do not work or are connected in violation of the scheme, the inspector will not sign the inspection certificate.
Another typical problem. lack of printing service center on the volume declaration. Without it, the document is considered invalid. Make sure the declaration states:
- 📄 Make and model of the car.
- 🔧 Type and certificate of farcope.
- 📅 Installation date and signature of the master.
Can I register a porcelain without visiting the traffic police?
No, remote registration of the farcope is not possible. However, from 2026 you can make an appointment through the portal. Public servicesThat'll save time. Also, some service centers offer a turnkey service - they themselves submit documents to the traffic police, but this increases the cost by 2,000-3,000 rubles.
If you are denied registration, request a written justification. Often, the failures are due to the incompetence of the inspector. In this case, you can appeal the decision through the superiors or the court.
FAQ: answers to popular questions about the registration of the farcope
Do I need to register the farcop if I do not tow the trailer?
Yes, you do. According to the law, any change in the design of the vehicle is subject to registration, regardless of whether you use the farcop or not. The exception is removable farcopes on standard mounts (if provided by the manufacturer).
Can I drive without registration if it is removable?
If the farcop is removable, but its installation required drilling of the body or changing the electrical wiring, registration is mandatory. Removable devices on standard mounts (without interference with the design) do not need to be registered, but this must be confirmed by documentary (for example, the instructions of the car manufacturer).
How long does it take to register a farcope?
If all documents are available, the procedure takes 1-3 days:
- 1 day - installation in the service.
- 1-2 days – examination.
- 1 day - visit to the traffic police.
If a duplicate PTS is required, the period will increase to 30 days.
Can I register a farcop on a car on credit or leasing?
Yes, but you will need the written consent of the bank or leasing company. Without it, the traffic police will refuse to register, since the car is pledged. Usually, banks give consent if the changes do not reduce the cost of the vehicle (and the farcop does not apply to such).
What happens if you sell a car with an undesigned farcope?
If the farcop is not registered, the new owner will not be able to put the car on the account until the violation is eliminated. You will either have to arrange the farcop before selling it or dismantle it. Otherwise, the transaction may be declared invalid.
The registration of the farcope is a procedure that requires attention to detail, but with the right approach, it will not take much time. The main thing is to choose a certified device, install it in a licensed service and collect a full package of documents. This will save you from fines and problems when operating a car with a trailer.