Finding a quality stock for Bekas-12M pump The task that sooner or later faces the majority of owners of this popular domestic smoothbore weapon. Staffing often does not take into account the individual anthropometric features of the shooter, which affects the accuracy and comfort of shooting. Well-chosen bed It can radically change the behavior of the gun, making the discount quick and intuitive.
Owners often look for options with improved ergonomics or higher strength than standard plastic. The market offers many solutions: from budget analogues made of polymer to premium nut products with rubber shock absorbers. It is critical to consider the compatibility of a specific modification, since the design of the receiver may differ depending on the year of manufacture.
Do not ignore the condition of the seats and the angle of inclination of the ridge, since these parameters directly affect the aiming line.
In this article, we will discuss in detail where it is better to buy components, what to pay attention to when choosing a material and how to make a replacement without visiting a weapons workshop.
Criteria for choosing a lodge for Bekas-12M
The first and most important parameter in the search is compatibility with a specific modification of the gun. Bekas-12M has its own design features of the mounting, which may not coincide with the newer versions of the type Automobile or M-3. A mismatch even in a few millimeters can lead to distortion or inability to install.
The fabrication material plays a key role in durability and tactile sensations. The tree, usually a nut or beech, provides a classic aesthetic and a pleasant grip, but requires careful care and is afraid of moisture. Plastic (polyamide) is more resistant to external influences, easier to clean and often cheaper, but can be slippery in the cold.
Pay attention to the presence shock-absorbent. Pump shotguns have a tangible impact, and a high-quality rubber lining can significantly reduce the load on the shoulder of the shooter when using powerful cartridges.
The length of the butt should also match your physique; too short or long a bed will spoil the discount technique.
When buying a wooden butt, carefully examine the texture: the fibers should go along the axis of the product, not across, otherwise there is a risk of splitting when firing powerful charges.
Where to buy: Market and Suppliers Overview
Find a quality stock on Bekas-12M pump You can find them in specialized weapons stores, on large marketplaces or at private master gunsmiths. Official dealers of the manufacturer’s plant in Izhevsk or Ufa often have original spare parts in stock, which guarantees a perfect fit, but the range can be limited to basic models.
Private craftsmen and small workshops offer products with improved ergonomics, for example, with a more pronounced pistol protrusion or a special notch. These options are often more expensive than factory ones, but provide superior comfort. When buying from hands or on bulletin boards, be sure to require detailed photos of the places of attachment.
Risks of buying used butts
When buying a used lodge, there is a high risk of hidden cracks in the neck or a broken hole under the mounting bolt. Always check the integrity of the inner cavity.
It is worth considering logistics: wooden products are heavy and oversized, so delivery by mail can be expensive and risky due to possible damage during transportation.
Plastic analogues in this regard are more convenient and cheaper to send.
⚠️ Note: When ordering through online stores, be sure to specify for which modification Bekas-12 intended product, as visually similar models may have different geometry of the tail.
Instructions for butt replacement
Butt replacement process Bekas-12M It is relatively simple and does not require a complex tool, but requires care. Before starting any work, make sure that the gun is discharged, the chamber is empty and the store is also empty. Safety is the first principle of any manipulation of weapons.
To dismantle the old lodge, you will need a screwdriver and possibly pliers. First, you need to unscrew the fastening bolt, which is usually in the back of the butt or under the rubber back of the head. After loosening the bolt, carefully remove the forearm if the design requires disassembly of the entire node of the lodge.
☑️ Replacement tools
When installing a new part, it is important to correctly combine the holes and not to pull the mounting bolt, so as not to damage the thread in the receiver or the bed itself. After assembly, check the density of the adjoining of all parts: there should be no backlashes or creaks.
If the new butt sits too tight, an easy fit with a file in inconspicuous places is allowed, but this should be done extremely carefully.
| Work phase | The necessary tool | Implementation time | Difficulty |
|---|---|---|---|
| Disassembly of the knot | Screwdriver. | 5 minutes | Low. |
| Dismantling the old lodge | Passengers (if jammed) | 3 minutes | Low. |
| Installation of new parts | Screwdriver. | 5 minutes | Medium |
| Verification and adjustment | Visual control | 5 minutes | Low. |
Adjustment and fitting (Drop & Cast)
After the new butt has been installed The Bekas-12M pump often requires adjustment to a specific arrow. Parameters Drop (deviation of the ridge from the aiming line vertically) and Cast (horizontal deviation) is critical for correct discounting. Factory settings are averaged and may not suit everyone.
To change the Drop parameter, you can use various pads on the comb or replace the back of the head with a thicker / thinner one. This allows you to raise or lower the aiming line, which is especially important when shooting with or without winter clothing.
The ideal landing is achieved when you throw a gun with your eyes closed, you immediately see the fly exactly in the center of the sighting bar.
Adjustment Cast is necessary for people with non-standard shoulder width or features of the structure of the face. Sometimes light grinding of the comb or its build-up with special compositions is required.
Don’t be afraid to experiment with the thickness of the backs of your head, as this is the easiest way to adapt your weapon.
Materials: Wood vs. Plastic
Choosing between a wooden and plastic butt for Bekas-12M It is the eternal dilemma of hunters. Wood, especially nuts, has high strength, extinguishes vibrations and looks aesthetically pleasing. However, it is subject to swelling at high humidity and drying out in the cold, which can lead to the appearance of cracks.
Plastic (polyamide) is devoid of these drawbacks: it is absolutely moisture resistant, is not afraid of temperature changes and mechanical shocks. Modern plastics often have a texture that mimics wood and are pleasant to the touch. The main disadvantage remains a lower ability to extinguish the recoil compared to the solid wood, although high-quality rubber shock absorbers compensate for this disadvantage.
⚠️ Caution: Cheap plastics can become brittle in severe frosts (below -30°C), so high-quality polymer or wood is preferred for extreme northern hunting conditions.
If you plan to use the gun mainly in wet weather or on waterfowl, plastic will be more practical.
For hunting and exhibition purposes, many choose the classic tree.
Frequent problems and their solution
When installing an unoriginal stock on Bekas-12M pump Owners often face the backlash of the forehead. This problem is solved by laying thin strips of skin, rubber or using epoxy glue to fix bushings. The main thing is not to disrupt the recharge mechanism.
Another common problem is too tight the bolt of the attachment. In this case, you should not use excessive force, it is better to check whether there are no burrs on the thread or in the landing hole, and if necessary, carefully clean them with a topfill.
- 🔧 Luft is eliminated by pads of thin leather or by adjusting screws.
- 🔨 Cracks on the tree can be sealed with epoxy resin with the addition of wood dust.
- 🎨 Cracks on plastic are easily masked with a soldering iron or a special remake.
Check the condition of the fasteners regularly, as vibration when fired can weaken the connections.
Timely maintenance will prolong the life of your weapon.
The secret to quiet work
To the butt did not rattle when walking, lubricate the contact places of wood and metal with a small amount of wax or paraffin.
Questions and Answers (FAQ)
Will the stock from Bekas-Avto fit the model Bekas-12M pump?
In most cases, no. The design of the receiver boxes and the mounting angles of the pump and automatic versions are different. Installation may require serious revision with a file, which is not recommended.
How do you determine which tree the butt is made of?
The nut has a more pronounced, ornate texture and heavier weight. The beech is lighter, with straighter fibers and often has radial rays ("mirrors"). Nuts are valued higher for strength and beauty.
Can you shorten the stock by yourself?
Yeah, it's possible. You need to saw off part of the occipital part, observing a right angle. However, this can disrupt the balance of the gun. It is better to use removable rubber shock absorbers of different thicknesses.
Where to find drawings for self-manufacturing?
Official drawings of the plant can be in the technical documentation (passport) on the gun. On the Internet there are amateur measurements, but rely on them with caution, it is better to take measurements from your own copy.