When space is limited in a bathroom or laundry room, every inch counts. One of the most practical solutions for saving space has become dryer stand for washing machine - a design that allows you to place a clothes dryer directly above the washing machine. Such a tandem not only frees up useful space, but also creates a single ergonomic system for washing and drying.
However, not all stands are universal: they differ in material of manufacture (metal, plastic, combined options), type of fastening (mounted, rack-mounted, built-in), as well as maximum load - from 15 to 50 kg. It is also important to consider compatibility with specific models of washing machines (Indesit, Bosch, Electrolux) and dryers (Candy, Zanussi, Midea). In this article, we will look at how to choose a stand for your tasks, avoid installation errors and extend the service life of the equipment.
Why do you need a dryer stand for your washing machine?
The main purpose of this design is space optimization. In typical apartments, bathrooms rarely exceed 4–6 m², and placing a washing machine, dryer, and laundry basket there can be problematic. The stand solves this problem by raising the dryer to a height of 80–100 cm above the washing machine.
In addition to saving space, there are other advantages:
- 🔄 Convenience of rearranging laundry: no need to carry wet clothes across the room - just take them out of the washing machine drum and immediately hang them on the dryer.
- 💧 Humidity reduction: laundry is dried in one place, rather than scattered around the apartment, which reduces the risk of mold.
- 🛠️ Washing machine protection: High-quality stands prevent the dryer from falling and damaging equipment.
- 📏 Ergonomics: The height of many models can be adjusted to suit the user's height.
However, there are also nuances. For example, metal framed stands may create vibration resonance if the washing machine is not balanced. It is also important to consider the weight of the dryer: models with a heat pump (weight from 30 kg) will require a reinforced design.
Types of dryer stands: how to choose the best one?
All stands are divided into three main types according to the method of fastening. Each of them has its own advantages and limitations:
| Stand type | Benefits | Disadvantages | Price, ₽ |
|---|---|---|---|
| Wall-mounted | Maximum strength, does not burden the washing machine, suitable for heavy dryers | Requires reliable fastening to the wall (not suitable for drywall), difficult installation | 2 500–6 000 |
| Rack-mounted (with legs) | Versatile, does not require drilling walls, easy to move | Less stable, takes up space on the floor | 1 800–4 500 |
| Built-in (in a closet or niche) | Fits perfectly into the interior, hides communications | Expensive, requires individual order, difficult to dismantle | 8 000–20 000 |
When choosing, also pay attention to:
- 📦 Material: aluminum stands are lighter than steel ones, but less durable; plastic ones are cheaper, but can withstand up to 20 kg.
- 🔧 Height adjustment: important if there are people of different heights in the family.
- 🔌 Additional options: Some models are equipped with shelves for detergents or hooks for hangers.
⚠️ Attention: If your washing machine has "Delayed wash" function, make sure the stand does not block access to the control panel. Models Samsung WW90T554DAW and LG F4V9RWP2T The buttons are located on the top cover - this may complicate use.
Compatibility of stands with popular models of washing machines
Not every stand will fit every washing machine. Main parameters to consider:
- 📏 Washer width: standard models are 60 cm wide, but there are also narrow (45–50 cm) or wide (up to 65 cm).
- 🔄 Depth: for top-loading machines (Indesit BTW E71252, Beko WTV 7511 XS) depth can reach 60 cm, which requires a special stand.
- ⚖️ Washer weight: if the machine weighs more than 70 kg (for example, Bosch WGG 24441), the stand must withstand a total load with the dryer of up to 100 kg.
The table below shows examples of compatibility of stands with popular models:
| Washing machine model | Recommended stand | Max. load, kg | Notes |
|---|---|---|---|
| LG F2J5HN0W | LG STWM1 (original) | 40 | Only for LG front loading machines |
| Samsung WW60T4040TE | Samsung WE300 | 35 | Comes with anti-vibration feet |
| Beko WRS 55P2 BSW | Beko STAND-60 | 50 | Suitable for vehicles up to 55 cm deep |
| Indesit IWSB 51051 | Universal Metaltex 6003 | 30 | Requires additional wall mounting |
For machines with vertical loading stands are less common. One of the proven options is Electrolux EWT 1064 ILW with adapter for dryer mounting Electrolux EDH 3684 PDW. However, in this case, you need to make sure that the washer lid opens freely.
What to do if the stand doesn't fit?
If your washing machine has non-standard dimensions (for example, AEG L7WBG641R width 59.6 cm), you can order the stand according to individual sizes from furniture manufacturers (for example, "Shkafchik.ru" or "Your Laundry"). An alternative is to use universal adjustable stands with telescopic legs that adjust to widths from 50 to 70 cm. However, such models are usually more expensive (from RUB 5,000) and require more complex assembly.
Step-by-step instructions for installing the stand
You can install the stand yourself if you follow the algorithm. Let's look at the installation using an example hanging stand Metaltex 6005:
Check the levelness of the floor (permissible slope - no more than 2°)
Measure the distance from the wall to the washing machine (minimum 5 cm for ventilation)
Prepare tools: drill, level, 10 mm wrench, 6x40 mm dowels
Disconnect the washing machine from the network and water supply
-->
Step 1. Marking. Attach the stand to the wall above the washer and mark the mounting locations with a pencil. Make sure the hole spacing matches the template in the instructions. For Metaltex 6005 The standard distance between dowels is 560 mm.
Step 2. Drilling. Drill holes 50mm deep (for a concrete wall, use a Ø6mm concrete drill bit). If the wall is tiled, start drilling at low speed to avoid chipping.
Step 3. Attaching the brackets. Insert the dowels and tighten the screws. Check the horizontal level - a misalignment of more than 3 mm can lead to vibration of the dryer.
Step 4: Install the stand. Attach the horizontal bar to the brackets and secure with bolts. Make sure that all connections are tightened to 12–15 Nm (use a torque wrench).
Step 5. Check. Place the dryer on the stand and rock it slightly. If the structure is wobbly, tighten the fasteners or add rubber pads under the legs of the washer.
⚠️ Attention: If your washing machine has "Steam wash" function (for example, Samsung WW90T554DAW), make sure that the stand does not block the ventilation holes on the back wall. Overheating may cause the thermal protection to trip.
Before finally fixing the stand, place a load weighing 20–25 kg (for example, a bag of salt) on it and leave it for 12 hours. This will help identify any weak points before installing the dryer.
Top 5 mistakes when choosing and installing a stand
Even experienced craftsmen sometimes make mistakes that later lead to equipment breakdowns or injuries. Here are the most common:
- Ignoring the weight of the dryer. For example, dryer Candy CS4 H7A2DE weighs 38 kg, and if you add the weight of the laundry (up to 7 kg), the total load will exceed 45 kg. Stand with a maximum load of 30 kg (Vileda 146864) will not work in this case.
- Installation on uneven floors. If the washer is placed on an incline, vibration during spinning is transmitted to the stand, which can cause the dryer to fall. The solution is to use adjustable legs or anti-vibration pads.
- No gap for ventilation. There must be a gap of at least 10 cm between the washer and dryer, otherwise overheating will lead to malfunctions of the electronics.
- Using unsuitable dowels. Drywall walls require butterfly anchors or chemical anchors, not regular plastic ones.
- Neglect of instructions. For example, in stands Bosch WZT 28660 You must first secure the side posts, and only then the top bar. Violation of the assembly order leads to deformation of the frame.
To avoid problems, always check with washing machine passport (section "Installation and connection") and instructions for the stand. For example, for models AEG L7FEC966R the manufacturer directly states: "It is prohibited to install objects weighing more than 20 kg above the machine without additional wall supports".
Before purchasing a stand, be sure to check compatibility with your washing machine model in three parameters: width, depth and maximum load. Even a difference of 1-2 cm can make installation impossible.
Review of the best dryer stands in 2026
Based on user reviews and expert tests, we have compiled a rating of stands for different budgets:
| Model | Type | Max. load, kg | Price, ₽ | Pros | Cons |
|---|---|---|---|---|---|
| LG STWM1 | Mounted (original) | 40 | 4 200 | Ideal for LG cars, anti-corrosion coating | Dear, only for LG |
| Metaltex 6005 | Universal mounted | 50 | 3 100 | Adjustable width (50-60cm), fits most brands | Requires precise markings during installation |
| Vileda 146864 | Rack-mounted | 30 | 1 900 | Lightweight, does not require wall mounting, budget-friendly | Unstable when washing machine vibrates |
| Bosch WZT 28660 | Built-in | 60 | 12 500 | High build quality, hidden installation | Expensive, complicated installation |
| Samsung WE300 | Mounted | 35 | 3 800 | Comes with anti-vibration pads | Only for Samsung washing machines |
For washing machine owners Beko and Indesit would be a good option Metaltex 6005 — it is universal and can withstand weight up to 50 kg. If you need a mobile stand that can be moved, pay attention to Vileda 146864, but take into account its load limitations.
Alternative solutions: when the stand does not fit
In some cases, installing a stand is impossible or impractical. Let's look at the alternatives:
- 🪜 Wall-mounted dryers with drawer sections (for example, Leifheit Linomatic 500). They are attached to the wall next to the washing machine and are pulled out only when necessary.
- 🚪 Accordion dryers on the door (Gimi Drying Rack). Suitable for small bathrooms, but can withstand no more than 15 kg of laundry.
- 🔄 Heat pump dryers on wheels (Midea MDF-40D7). They can be moved around the room, but they take up space.
- 🏠 Built-in drying cabinets. Optimal for renovation: the cabinet is mounted in a niche, and a dryer and washing machine are installed inside.
If in your bathroom low ceilings (less than 2.4 m), the stand may be inconvenient - when you lift your hands to the upper rungs of the dryer, you will touch the ceiling. In this case it is better to choose top-loading floor dryer (for example, Candy CS4 H7A2DE).
Is it possible to make a stand with your own hands?
Yes, but only if you have experience working with metal. Homemade stand made of aluminum profile (for example, 40×40 mm) and steel corners will cost less (about 1,500 ₽), but will require welding or reliable fastening with bolts. The main risk is incorrect calculation of the load. For example, if you use a profile less than 2 mm thick, the structure may bend under the weight of the dryer. For drawings, you can use the dimensions of factory stands as a basis (for example, LG STWM1) and adapt them to your washing machine.
FAQ: Frequently asked questions about dryer stands
Can a stand be installed on a top-loading washing machine?
Yes, but the choice of models is limited. Suitable stands with open frontso as not to block access to the hatch (for example, Electrolux EWT 1064 ILW with adapter). Also make sure that the washer lid opens 90° without obstruction.
How much weight should a heat pump dryer stand support?
Heat pump dryers (e.g. Midea MDF-40D7 or Haier HD90-A3969) weigh 35–45 kg. Adding the weight of the laundry (up to 9 kg), we get a load of up to 55 kg. Therefore, the stand must withstand not less than 60 kg. Pay attention to the models Bosch WZT 28660 or Metaltex 6005.
Do I need to attach the stand to the wall if the washing machine is stable?
Yes, even if the washer does not vibrate, wall mounted stands always require wall mounting. Vibration can occur over time (for example, when laundry is unbalanced) and cause the dryer to fall. Exception - rack stands, but they must also have anti-slip pads.
Can I use a dryer rack from another brand?
Yes, if the dimensions match. For example, stand Metaltex 6005 universal and suitable for washing machines Samsung, LG, Indesit 60 cm wide. However, the original stands (e.g. LG STWM1) may have additional fasteners that improve stability.
How to reduce the vibration of the stand during the spin cycle?
There are several ways:
- Install anti-vibration pads under the legs of the washing machine (for example, Samsung Anti-Vibration Pads).
- Check drum balancing — perhaps the laundry has bunched up in one lump.
- Tighten all fastenings of the stand and make sure that it is firmly fixed to the wall.
- Use rubber gaskets between the stand and the dryer.
If the vibration remains strong, the washing machine may be on an uneven floor - check the level.