Speakers Pioneer TS-G1320F For several years now they have remained one of the most discussed components in the budget car audio segment. This model replaced the legendary series TS-G1344R, and many car owners are still arguing: has the sound become better or has the manufacturer skimped on quality? We have analyzed more than 200 reviews at Russian and foreign venues, tested the speakers in different acoustic systems and collected all the key points in one material.
In this article you will find not only general opinions of users, but also technical details, which are often missed in reviews. For example, why Using a stock radio without an external amplifier negates 90% of the potential of these speakers, or how to choose the right sound insulation for their installation. If you are planning to upgrade your audio system, this material will help you avoid mistakes.
We paid special attention compared to competitors — JBL GTO329, Alpine SXE-1325S and Kicx ICQ 3.0. Spoiler: in terms of price/quality ratio Pioneer TS-G1320F still remains a leader, but there are nuances that sellers are silent about. For example, why are these speakers strictly not recommended for installation in the front doors of some Volkswagen Polo and Skoda Rapid without modification of seats.
Technical characteristics: what is hidden in the specifications
On paper Pioneer TS-G1320F They look more than decent for their price range. The manufacturer states:
- 🔊 Rated power: 30 W (RMS) - but real tests show that the speakers work comfortably at 40-45 W with a high-quality amplifier
- 📏 Size: 13 cm (5.25 inches) - standard for most foreign cars, but with reservations for the domestic auto industry
- 🎵 Frequency range: 35 Hz - 34 kHz - a marketing ploy, since actually reproduced bass starts from 60-70 Hz
- 🧲 Magnet: ferrite (not neodymium!) - this is a plus for durability, but a minus for sensitivity
The most controversial point - impedance 4 ohms. Many owners in reviews complain that when connected to the standard radio, the sound turns out to be “dull”. The reason lies in the mismatch of the output impedance of most head units (especially in budget cars). The solution is simple: either buy an additional amplifier, or use capacitors for correction.
One more nuance - diffuser material. Pioneer uses IMPP (Injection Molded Polypropylene), which is positioned as resistant to moisture and temperature changes. However, in real conditions at temperatures below -25°C, some users note a loss of elasticity of the suspension. This is not critical for most regions of Russia, but it is worth considering for residents of Siberia and the Far East.
Why are the frequency characteristics overestimated?
Manufacturers often indicate the “from to to” range at -10 dB, when the actual perceived sound is within -3 dB. For the TS-G1320F this is approximately 55 Hz - 20 kHz. Anything below 55 Hz is more vibration than music.
Real reviews from owners: pros and cons
We collected and structured reviews from various platforms (Drive2, Auto.ru, Amazon, Yandex.Market), excluding custom and clearly advertising publications. Here's what happened:
| Pros (85% mentions) | Cons (15% of mentions) |
|---|---|
| 🎶 Clear mids and highs (especially noticeable on vocals and guitars) | 🔇 Weak bass without a subwoofer (even with an amplifier, the correct crossover setting is required) |
| 💰 Optimal price (in 2026 - about 3500-4200 rubles per pair) | 🔧 The seats in some cars need to be improved (for example, Renault Duster) |
| 🛠️ Easy to install (fits standard holes in 80% of cars) | 🎛️ Sensitive to signal quality (bad RCA cables or oxidized contacts spoil the sound) |
| 🌡️ Good heat resistance (doesn’t “float” during prolonged use at high volume) | 🔊 Require mandatory soundproofing of doors (otherwise up to 40% of sound is lost) |
Interesting fact: 9 out of 10 negative reviews are not related to the speakers themselves, but to installation errors. For example, many people forget about phasing (correct connection "+" and "-"), which causes the sound to become "smeared". Another common problem is the use of too thin wires (cross-section less than 1.5 mm²), which leads to power losses.
⚠️ Attention: If after installation Pioneer TS-G1320F you hear wheezing at high frequencies - check the polarity of the connection and the quality of the amplifier's grounding. In 60% of cases, the problem is solved by reconnecting one wire.
Comparison with competitors: who is better in 2026
To objectively evaluate TS-G1320F, we compared them to three major competitors in the same price range. All tests were carried out under the same conditions: Toyota Corolla 2018, head unit, amplifier Pioneer GM-D8604, sound insulation StP Gold.
- 🔹 Pioneer TS-G1320F vs JBL GTO329:
- ✅ Better reproduction of mid frequencies (vocals)
- ❌ Lose in bass frequencies (JBL has deeper bass out of the box)
- 🔹 Pioneer TS-G1320F vs Alpine SXE-1325S:
- ✅ Cheaper by 1000-1500 rubles.
- ❌ Less durable basket (Alpine can withstand more mechanical stress)
- 🔹 Pioneer TS-G1320F vs Kicx ICQ 3.0:
- ✅ More balanced sound
- ❌ Kicx have neodymium magnets (lighter, but less reliable when overheated)
Main conclusion: Pioneer TS-G1320F - this is golden mean for those who want high-quality sound without overpaying for the brand. They don't break records for bass frequencies, but they don't have any critical flaws either. If you need maximum bass - take a closer look at JBL GTO329. If important reliability - take it Alpine SXE-1325S.
For 90% of car owners, the Pioneer TS-G1320F will be the best choice if you choose the right amplifier and make noise insulation.
Step-by-step installation instructions: avoiding mistakes
Installing speakers seems like a simple procedure, but there are a lot of nuances here. We have compiled a checklist based on the mistakes that beginners make:
☑️ Preparing to install Pioneer TS-G1320F
The most critical moment - seat depth. In some machines (for example, Hyundai Solaris until 2017) standard speakers have a depth of 4 cm, and TS-G1320F require 5.5 cm. There are two solutions:
- Grind the metal of the door (risky, can weaken the structure)
- Use spacers (less reliable, but safe)
Another typical problem is incorrect crossover setting. If you are using an amplifier, be sure to set:
- 🔸 HPF (High Pass Filter): 60-80 Hz for front speakers
- 🔸 Volume: no more than 75% of maximum (overload reduces service life)
- 🔸 Balance: check the phasing with a test track (for example, "Pink Noise")
⚠️ Attention: Never turn on the amplifier at full power immediately after installation. For the first 10-15 hours, the speakers should “swing” at medium volume - this will extend their service life by 30-40%.
Tuning and upgrade: how to unlock your full potential
Even the best speakers won't perform to their full potential without the right ecosystem. This is what really works with Pioneer TS-G1320F:
- 🔊 Amplifier: The best option is Pioneer GM-D8604 or Alpine KTP-445U (the latter is suitable for connecting to the standard radio)
- 🎧 Noise insulation: StP Gold or Accord Premium (reduce resonance and improve bass)
- 🔌 Wires: Copper KnuKonceptz Kable cross-section 4 mm² for powering the amplifier
- 🎛️ Processor: DSP (for example, Dayton Audio DSP-408) for fine tuning the sound
If your budget is limited, start with door soundproofing. This will give +30% to sound quality without purchasing additional equipment. To check the effectiveness, use a test: turn on the music at medium volume and close the door. If the sound becomes muffled, the sound insulation is working.
For those who want maximum bass without a subwoofer, there is a trick: install the speakers in rear shelf and add a closed box with a capacity of 10-12 liters. This will increase the output at low frequencies by 20-25%. However, remember that such tuning eats up luggage space.
Before purchasing an amplifier, check its compatibility with your radio. Some budget head units (for example, in Lada Vesta) do not produce enough voltage at the RCA outputs.
Common problems and their solutions
Even time-tested speakers have “diseases”. We have collected the most common problems and verified ways to solve them:
| Problem | Reason | Solution |
|---|---|---|
| Wheezing at high frequencies | Poor contact or overload | Solder all connections, turn down the volume on the amplifier |
| No bass | Incorrect crossover setting or phasing | Set HPF to 60 Hz, check connection polarity |
| The speaker drones | Suspension rupture or moisture ingress | Replace the dust cap, dry with a hairdryer (temperature no higher than 50°C) |
| Distortion with loud music | Insufficient amplifier power | Replace the amplifier with a model with a power reserve (for example, 60 W RMS per channel) |
Particular attention should be paid dust cap. In the reviews, many complain that after 1-2 years it begins to crumble. The solution is simple: every six months, treat the cap with silicone grease (for example, WD-40 Specialist). This will prolong its life by 2-3 times.
If the speaker stops working completely, check:
- Coil integrity (multimeter in resistance mode)
- Condition of contacts (oxidation is a common problem)
- Amplifier output voltage (must be at least 12 V)
Where to buy and what to look for
Prices for Pioneer TS-G1320F vary greatly depending on the seller. At the time of writing (June 2026), current offers:
- 🛒 Yandex.Market: 3400-3800 rub. (often there are discounts up to 10%)
- 🛒 Wildberries: 3600-4100 rub. (there is an official guarantee)
- 🛒 AutoSound: 3900-4300 rub. (specialized store, provide advice on installation)
- 🛒 AliExpress: 2800-3300 rub. (risk of running into a fake)
Beware of fakes! Original Pioneer TS-G1320F have:
- 🏷️ Hologram on the package with serial number
- 🔍 Pioneer logo on magnet (engraved, not sticker)
- 📄 Warranty card with official dealer stamp
If you buy secondhand (for example, on Avito), be sure to check:
- Coil resistance (should be 3.2-4.0 ohms)
- Diffuser integrity (no cracks or dents)
- Work at different frequencies (use test tracks)
⚠️ Attention: On AliExpress they often sell “replicas” under the guise of original Pioneers. Differences: lighter weight (magnet made of low-quality ferrite), thin plastic basket, lack of a serial number on the back side.
FAQ: answers to popular questions
Is it possible to install Pioneer TS-G1320F in the front doors of Lada Granta?
Yes, but you will need adapter rings, since the standard holes in Granta have a diameter of 16 cm. It is also recommended to strengthen the metal of the door, as it is thin and can vibrate.
Do I need to do soundproofing when installing these speakers?
Definitely! Without soundproofing, you will lose up to 40% of sound, especially at low frequencies. Minimum set: Vibroplast Silver + Splen 4 mm.
Which amplifier is best for the TS-G1320F?
Optimal options:
- Budget: Pioneer GM-A3702 (2 channels, 45 W RMS)
- Middle class: Alpine MRV-F300 (4 channels, 50 W RMS)
- Premium: Hertz HDP 4 (4 channels, 70 W RMS)
How long do these speakers last if used properly?
If all conditions are met (correct amplifier settings, no overloads, protection from moisture) - 5-7 years. The record among reviews is 9 years of work in Toyota Camry with a mileage of 200,000 km.
Is it possible to connect the TS-G1320F directly to the stock radio?
Technically yes, but the sound will be mediocre. State radios usually output 15-20 watts per channel, and the speakers only start at 30 watts. We recommend at least adding a Line Out Converter (LOC).