Tent Outventure Cabin with a dedicated vestibule for shower and toilet, it solves the problem of lack of sanitary conditions in wild camping, allowing you to organize a full-fledged hygienic area in just 15 minutes. Unlike classic models, where you need to look for a shared shower or wash in a pond, this design provides an internal space about two meters high, where a tourist shower on a rod or a portable dry closet can easily fit. The frame, made of fiberglass bars, provides the necessary rigidity to withstand wind loads, while maintaining low weight for transportation in the trunk of a car.
Material polyester 190T with a polyurethane coating creates an effective barrier from prying eyes, which is critical for comfort when taking water procedures. Sealed seams and ventilation windows with mosquito nets prevent the accumulation of condensation, which often becomes a problem in these types of enclosed spaces. Users note that the presence of an internal pocket for small items and a hook for a watering can makes operation as convenient as possible, even with limited time to set up camp.
Design features and design of the model
The basis for the reliability of the entire structure is a frame assembled from durable fiberglass arches connected by metal bushings. This combination of materials was not chosen by chance: fiberglass it is flexible and does not rust, and the metal adds strength to the joints that experience maximum fabric tension. The “cabin” shape provides vertical walls, which maximizes the useful internal volume and allows you to comfortably change clothes or take a shower without your shoulders touching the wet walls of the awning.
The entrance group is equipped with a double zipper, which operates smoothly even after sand or fine dust gets in. The top entry flap can be locked open for added ventilation or closed completely for privacy. Inside the tent there are special loops and hooks designed for hanging a container of water or lighting fixtures, which turns an ordinary shelter into a functional sanitary module.
The color scheme of the model is usually made in neutral green or blue tones, which allows the object to harmoniously fit into the landscape and not attract undue attention. The lower part is made of denser, waterproof material, often with reinforced corners, since it is this area that is subject to the greatest mechanical stress and contact with wet grass or soil.
⚠️ Attention: When installing, be sure to straighten all folds of the fabric before final tensioning, otherwise water may accumulate in places where creases occur, which will lead to leaks and accelerated wear of the water-repellent impregnation.
Specifications
Weight: about 4.5-5 kg. Packaged dimensions: 60x20x20 cm. Capacity: 1 person + equipment. Seasonality: 3 seasons (spring, summer, autumn).
Contents and necessary accessories
Standard equipment Outventure Cabin includes the awning itself, an assembled frame or arches in a case, a set of guy ropes and pegs. However, for full use as a shower stall, the basic set may not be enough, and you will need to purchase a number of accessories. First of all, we are talking about a water tank with a shower head, which can be hung on the roof or a special internal rack, if it is provided for by the design of a particular modification.
To organize a toilet, folding toilet chairs or portable dry toilets are often used, which fit perfectly on the tent floor due to the square shape of the base. It is important to purchase absorbent granules or chemical liquids for composting toilets in advance to ensure a hygienic process and no unpleasant odors in a confined space.
- 🚿 Water supply hose and shower head with mode switch.
- 🪣 A container for collecting wastewater (if water is not expected to flow into the ground).
- 🔦 Lantern or lamp for indoor lighting in the dark.
- 🧻 Floor mat to protect against dirt and create a comfortable surface.
Experienced hikers also recommend having an additional repair kit on hand, including a piece of fabric for patches and PVC glue, although the main material of the tent is quite resistant to damage. Having a small mat inside will greatly improve comfort, as the ground surface may be cold or uneven.
Step-by-step installation instructions
Installation of the tent begins with choosing a flat area, cleared of sharp stones, branches and debris that can damage the bottom. Unpack the tent and spread it on the ground with the entrance facing the desired direction, taking into account the direction of the wind, so that the tent does not float during assembly. Lay out the frame arcs and connect them according to the markings or color scheme, inserting the ends of the arcs into the corresponding eyelets on the fabric.
After assembling the frame, lift the structure, adjusting the fabric so that it evenly fits the arches without distortion. Pull wind guy lines and secure them with pegs at an angle of 45 degrees to the ground - this will give the entire structure the necessary stability and rigidity. Check the operation of the zippers and ventilation flaps, making sure nothing is caught in the fabric.
☑️ Checklist for correct installation
If you are using the tent as a shower, place a container of water inside, preheating it in the sun or heating it separately. Make sure that the water drainage is organized correctly: either through a special hole in the floor (if there is one), or the water goes to the bottom if the soil absorbs moisture well.
⚠️ Attention: Never leave a tent with a full water container installed inside unattended in windy weather, as the center of gravity shifts upward and the structure can be overturned by a gust of wind.
Materials and moisture protection
Fabric Outventure Cabin impregnated with a special polyurethane compound that repels water, but requires careful handling. Over time and under the influence of ultraviolet radiation, the protective layer can become thinner, so after each season it is recommended to check the seams and, if necessary, treat them with a special seam sealant. 190T polyester has high tensile strength, but is susceptible to open flames, so installing heaters inside is strictly prohibited.
The bottom of the tent is made of denser material, often with a water resistance index of 3000 mm or higher, which allows you to place the tent directly on wet grass. However, for long-term comfort and heat retention, it is better to use additional footprint (protective bottom) or travel mat. This will also protect the main fabric from abrasion from sand and small pebbles.
| Parameter | Meaning | Note |
|---|---|---|
| Awning material | Polyester 190T PU | Water-repellent impregnation |
| Bottom material | Polyester/PE | Enhanced water resistance |
| Frame | Fiberglass | Flexible and lightweight |
| Water resistance | 2000-3000 mm | Withstands heavy rain |
After use, be sure to dry the tent unfolded in the shade, avoiding direct sunlight, which can burn the fabric.
Comparison with analogues and competitors
In the tourism equipment market, the model Outventure competes with products from NovaTour and Trek Planet, often offering a more affordable price with comparable characteristics. The main advantage of the “cabin” is its shape, which allows you to make the most of the internal space, while cone-shaped shower tents are often cramped for tall adults.
Analogs from other brands may offer an automatic opening system (pop-up), which speeds up installation, but makes the tent less resistant to wind and more cumbersome to transport. Outventure Cabin in this regard, it benefits from the classic assembly on arcs, which provides better aerodynamics and design reliability in field conditions.
When choosing between different models, you should pay attention to the presence of a vestibule or double entrance, which simplifies changing clothes and storing things in a dry place. Some competitors offer models with a transparent top, which is fun for stargazing but reduces privacy if the camp is in a crowded area.
Care, storage and service life extension
In order for the tent to serve for many years, it is necessary to follow simple rules of operation and storage. After each trip, clean the fabric from dirt with a soft brush or sponge with soapy water, avoiding the use of aggressive chemicals and washing powders that can destroy the protective layer. Drying should take place under natural conditions, without the use of heating devices that can deform synthetic fibers.
The product should be stored in a dry, cool place, flattened or loosely rolled, but not in a tightly sealed compression bag. Long-term storage in a compressed state leads to “fatigue” of the material and loss of elasticity, and can also damage the water-repellent impregnation on the folds.
- 🧼 Check the seams regularly for thread divergence.
- 🛠️ Lubricate zippers with paraffin or special grease for zippers.
- 🌬️ Air the tent before packing to eliminate moisture.
- 📦 Use the original storage bag without tamping down unnecessary items.
Prompt repair of minor damage, such as punctures or cuts, will prevent them from growing. For this, there are special repair kits, which are often included in the kit or purchased separately. Small holes can be sealed with self-adhesive tape for repairing tents, after degreasing the surface.
The main rule for the longevity of a tent is to never store it when wet or dirty.
⚠️ Attention: The use of open fire, gas burners or heaters inside the tent is strictly prohibited due to the risk of ignition of synthetic materials and poisoning by combustion products.
Frequently asked questions (FAQ)
Can this tent be used in winter?
The model is a three-season model and is not intended for use in winter at low temperatures and snow loads. The fabric can become brittle in the cold, and the frame is not designed to support the weight of snow.
Will the tent withstand strong winds?
When installed correctly using all wind guys and pegs, the structure will withstand moderate winds. However, in stormy weather it is recommended to further strengthen the tent or refrain from using it as a shower stall.
What is the optimal volume of water tank?
For a comfortable shower, 10-15 liters of water is enough for one person. A larger tank will create unnecessary load on the roof and may require additional reinforcement of the frame.
Do I need to additionally seal the seams?
Factory sealing is usually sufficient for the first seasons. However, after 2-3 years of active use, it is recommended to apply joint sealant to restore water tightness.
Can the tent be washed in a washing machine?
Absolutely not. Mechanical impact and wringing will destroy the water-repellent coating and may damage the frame inserts if they have not been removed. Hand cleaning only.