Why the axle shaft is not installed in My Summer Car and how to fix it

Introduction: Why the axle shaft refuses to go into place

Game My Summer Car is famous for its realistic physics and detailed car modeling - but this is what often becomes a source of headaches for players. One of the most common problems: the axle shaft stubbornly refuses to go into place, despite all efforts. You twist the nuts, try to align the parts, but nothing works. What's the matter?

In fact, there may be several reasons - from banal assembly errors to hidden game bugs. In this article we will look at all possible scenarioswhy the axle shaft does not lock, and we will give step-by-step instructions to fix the problem. It is important to understand that in My Summer Car the assembly mechanics are as close to reality as possible: if something doesn’t fit together, it means you either missed a step or made a mistake somewhere. And no, this is not a “glitch” - it’s almost always the player’s fault.

Before you rush to reinstall the game or look for mods, check the basics. Let's start with the most obvious - but often overlooked.

1. Checking fasteners and assembly sequence

First rule My Summer Car: assembly sequence matters. If you try to install the axle shaft before you have secured the axle or suspension, the game simply won't let you do it. Here's what you need to check first:

• 🔧 Is the bridge fixed? The axle shaft is attached to the axle, so it must be securely bolted to the frame. Check the bolts in the menu Inspect (key E).
• 🔩 Are the suspension nuts tightened? If the springs or shock absorbers are not fixed, the axle shaft will “walk” and will not snap into place.
• 🔄 Correct procedure? There is an unspoken rule in the game: first the suspension is assembled, then the axle, and only then the axle shafts and wheels.

If everything is secured, but the axle shaft still does not fit, try reset physics. To do this:

1. Open the pause menu (Esc).
2. Select Save & Exit.
3. Load your save again.

Sometimes this helps to "reset" frozen objects. If it doesn’t help, move on.

2. Diagnosis of bugs and glitches of the game

Although My Summer Car famous for its realism, it is not without bugs. Sometimes the axle shaft does not stand up due to conflict physics or errors in scripts. Here are typical signs that the problem is not in your actions, but in the game itself:

• 🐛 The axle shaft “falls through” the axle or wheel.
• 🔄 When you try to tighten the nut, it immediately unscrews.
• 🖥️ In the console (~) errors like NullReferenceException.

If you observe any of this, try the following methods:

1. Update the game via Steam. Developers regularly release patches to fix such bugs.
2. Check file integrity:

   RMB on the game on Steam → Properties → Local files → Integrity check

3. Disable mods. Even harmless textures can conflict with physics.

Critical moment: if the axle shaft is “stuck” in the bridge and does not respond to actions, try deleting the file savegame.dat in the save folder (located along the path Steam\steamapps\common\My Summer Car\data). This will reset progress, but often solves physics problems.

What should I do if the game crashes when installing the axle shaft?

This is a rare bug related to a physics engine conflict. Try:

1. Launch the game in windowed mode (-windowed in Steam launch options).

2. Disable anti-aliasing in graphics settings.

3. Install the mod MSF Physics Fix (available on Nexus Mods).

3. Problems with wheels and hubs

Players often forget that the axle shaft interacts not only with the axle, but also with the wheel. If the wheel hub or rim is not installed correctly, the axle shaft will not fit into place. Here's what to check:

Problem	Signs	Solution
The wheel is not secured	The axle shaft “rests” in the void	Screw the wheel to the hub with bolts (Wrench)
The hub is turned the wrong way	The nuts do not screw onto the axle shaft	Remove the wheel and rotate the hub 180°
Wheel disc is bent	The axle shaft aligns crookedly or incompletely	Replace the disk (buy a new one at the store)
Hub nuts are not tightened	The axle shaft “pops out” when driving	Tighten the nuts with a wrench 17 mm

Pay special attention wheel alignment. If the disk is installed crookedly, the axle shaft will rest against it, and it will not be possible to tighten the nut. To align a wheel:

1. Take it off (Wrench → Unscrew).
2. Hang it on the hub and slowly rotate it until it “sits” evenly.
3. Tighten the bolts crosswise.

4. Parts mismatch: original vs. tuning

B My Summer Car you can install non-standard parts - for example, axle shafts from Satsuma Tuning Parts or homemade options. However not all of them are compatible with basic components. If you installed a tuning axle shaft, but it does not fit, check:

• 🔧 Model matching. Some axle shafts are designed only for the rear or front axle.
• 📏 Length and diameter. Tuning parts may be longer or thicker than standard ones.
• 🔩 Mounting type. For example, semi-axes from Hayosiko require special nuts.

If you are unsure about compatibility, return the stock axle shaft and check if it fits. If yes, the problem is in the tuning part. Solutions:

• Buy adapters (sold at tuning stores).
• Change hub for a compatible model.
• Revert to standard parts if tuning is not necessary.

Attention! Some mods for parts can break physics. If after installing the mod the axle shaft no longer fits, remove it and test the game on a clean build.

5. Physical bugs: when the game “does not see” a part

Sometimes the axle shaft does not engage not because of player errors, but because glitch in the physics engine. It shows up like this:

• The axle shaft “passes” through the bridge, but is not fixed.
• The nut spins idle, without clinging to the thread.
• When saving/loading, the axle axis disappears or is duplicated.

Here's what you can do:

1. Reset physics:

   Open the console (~), enter resetphysics and press Enter.

2. Move the axle shaft manually:

   In the console, enter setpos X Y Z (coordinates can be found via getpos).

3. Remove "ghost" duplicates:

   In the console: deleteall halfshaft (deletes all semi-axes on the map).

If all else fails, try reinstall the game and completely delete the folder My Summer Car in Steamapps. Sometimes save files or caches conflict with physics.

6. Alternative Methods: When Nothing Works

If you have tried everything, but the axle shaft still does not stand up, there are radical measures left:

• 🔄 Start the build again. Sometimes it's easier to disassemble the bridge and reassemble it from scratch than to look for a mistake.
• 📥 Download save with working axle shaft. On sites like MSC Mods There are ready-made saves with assembled cars.
• 💻 Use cheats. Mod Teardown Cheat Menu allows you to teleport parts and fix them manually.

If you decide to disassemble the bridge, follow this order:

Attention! When using someone else's save or cheats, you risk losing progress or getting banned on multiplayer servers. We recommend that you try all legitimate methods first.

FAQ: Frequently asked questions about axle shafts in My Summer Car

Why does the axle shaft stand up crookedly, even if everything is secured?

Most likely you have the bridge is bent or hub installed incorrectly. Check:

• Are there any dents on the bridge (use Hammer for repairs).
• Does the hub axis coincide with the hole in the bridge (should be on the same line).

If the bridge is deformed, it will have to be replaced (buy a new one at the store Fleetari Repair Shop).

Is it possible to drive without one axle shaft?

Technically yes, but:

• The car will be uncontrollable (she will be pulled aside).
• The bridge and suspension will wear out faster.
• There is a risk at high speed break the hub.

It's better not to risk it and fix the axle shaft as soon as possible.

Where can I buy a new axle shaft in the game?

Standard axle shafts are sold in two places:

• Fleetari Repair Shop (cheap, but low quality).
• Teimo’s Store (more expensive, but more reliable).

Tuning axle shafts can be found in the store Satsuma Tuning Parts (opens after completing certain quests).

Why did the axle shaft stop moving after updating the game?

This is a common problem after major patches. Developers could:

• Edit physics of fastenings.
• Add new assembly conditions (for example, now you need to tighten the suspension nuts first).
• Fix bugs that previously allowed some steps to be bypassed.

Solution:

1. Check official changelog updates on the game page on Steam.
2. Reassemble the bridge taking into account the new requirements.
3. If the problem is widespread, wait for the hotfix (usually released within a week).

How to check if the axle shaft is broken?

B My Summer Car parts wear out, but visually this is not always noticeable. To diagnose axle shaft:

1. Remove the wheel (Wrench → Unscrew).
2. Take the axle shaft in your hands (G) and inspect it:
   • If it has cracks or burrs - it's broken.
   • If she bends when pressed, the metal becomes fatigued.

Try installing obviously working axle shaft (for example, new from the store).

A broken axle shaft can be repaired in Fleetari Repair Shop (if you have enough money and reputation) or replace it with a new one.