Modern car trips are hard to imagine without a reliable assistant who will plot the route, warn about traffic jams and indicate the exact location. One of these devices that has gained popularity due to its convenience and functionality is Navitel E707 Magnetic. This model stands out from its competitors not only because of its high-quality screen, but also because of its unique mounting system, which greatly simplifies interaction with the gadget while driving.
Drivers often face the problem of difficult installation of navigators, which require suction cups or bulky fixation mechanisms. Magnetic mount, implemented in this model, solves the problem with one hand, allowing you to instantly remove the device or install it back. In this material we will analyze in detail the technical features, the setup process and the nuances of operating this device so that you can use its capabilities one hundred percent.
Versatility Navitel E707 lies in its ability to work as a full-fledged multimedia center, and not just as a card. Availability of built-in Bluetooth module and support for external 3G modems turn it into a link between the driver and the digital world. Next we will move on to a detailed analysis of the hardware.
Specifications and hardware platform
The heart of the device is a powerful processor that provides fast processing of graphic data and instant recalculation of routes. Unlike budget models, where the interface may slow down when scaling the map, Navitel E707 Magnetic demonstrates stable operation even in 3D navigation mode. Screen resolution 800×480 dots provides a clear picture that is readable even in bright sunlight, which is critical for driving safety.
Particular attention should be paid to the navigation system. The module used here is GLONASS/GPS, which allows the device to quickly find satellites and more accurately determine coordinates in difficult urban environments, where the signal can be reflected from high-rise buildings. The built-in antenna is sensitive enough to work in most situations, although in deep tunnels or under a dense layer of concrete the signal is naturally lost, like with any civilian receiver.
Multimedia capabilities have also been expanded. The device supports playback of high-definition videos and audiobooks, which turns waiting in the car into a pleasant pastime. Availability of a slot for memory cards MicroSD With up to 32GB of capacity, passengers can download huge libraries of music or movies without worrying about running out of internal memory.
- 🚀 Processor: High clock speed for fast map rendering.
- 📡 Navigation: Combined reception of GLONASS and GPS signals.
- 🔋 Autonomy: Built-in battery for operation outside the vehicle network.
- 🎵 Multimedia: Supports MP3, MP4, AVI, JPEG formats.
⚠️ Attention: Despite the presence of a built-in battery, its capacity is primarily designed to save settings and short-term operation when transferring from a car to a building. The device is not intended for long-term navigation without connection to the on-board network.
The body of the device is made of high-quality plastic, pleasant to the touch and resistant to fading in the sun. The ergonomics of the buttons are designed to minimize the risk of accidental pressing, while still providing easy access to the main functions. The connectors are protected by rubber plugs that prevent dust from entering.
Unique magnetic mount and installation
The main feature of the model is the system Magnetic Mount. The kit comes with a special plate that is attached to the windshield or dashboard using an adhesive layer. The navigator itself has a built-in magnet that is securely fixed to this plate. This solution eliminates the need to use a suction cup every time, which loses its properties over time or leaves marks on the glass.
The installation process is as simple as possible. First, you need to degrease the surface of the glass or plastic with the alcohol wipe included in the kit. Then the protective film is removed from the adhesive base, and the pad is pressed to the selected location. It is important to let the glue “set” for several hours before hanging a heavy device on it.
☑️ Checking the mounting installation
The navigator itself is brought to the installed platform and simply magnetized. The strength of the magnet is optimally selected: the device does not tremble due to road vibrations, but if necessary, it can be removed with one confident movement of the hand. This is especially convenient when you need to quickly take the navigator with you so as not to leave it in the car overnight.
- 🧲 Fixation: Instant fastening without mechanical clamps.
- 🔄 Rotation: Possibility of rotating the device in a horizontal plane.
- 🖐️ Management: Installation and removal with one hand.
⚠️ Attention: Do not place the magnetic pad in the airbag operating area. Also avoid installing directly above air conditioner ducts to prevent hot or cold air from directly hitting the screen, causing temperature variations.
If you plan to use the navigator on different cars, you can purchase additional base pads. This will allow you to quickly transfer the device between cars, simply by rearranging the gadget itself, rather than dismantling the mounts each time.
Navitel software and maps
The operating system of the device is optimized for working with navigation software Navitel Navigator. This is one of the most detailed cartographic systems, especially for the CIS countries. Maps are already preinstalled in the device's memory, but they must be updated periodically to keep the data up to date. New versions of maps contain information about opened junctions, changed traffic patterns and new addresses.
You don't have to be an IT expert to update maps. All you need to do is connect the device to your computer via a USB cable, go to your personal account on the manufacturer’s official website and download the latest files. The process takes time, depending on the Internet speed and the volume of updates, but the result is worth it - you get up-to-date information about the road situation.
How to update maps without a computer?
There is a Navitel Updater function that allows you to update maps via Wi-Fi or 3G modem if the device is connected to the Internet. However, this method requires a stable connection and may take longer than a wired update.
The program interface is intuitive. Large buttons, clear icons and voice guidance make using the navigator comfortable. System 3D interchanges helps you navigate complex multi-level intersections by showing in advance which lane you need to change into. POIs (points of interest) are also available to help you find the nearest gas station, cafe or pharmacy.
- 🗺️ Detail: Houses, building numbers, courtyard entrances.
- 🚦 Traffic lights: Display operating modes and speed limits.
- 📢 Voice: Flexible settings for voice prompts.
⚠️ Attention: When updating maps, be sure to back up old files. In rare cases, a new file may become corrupted or not read correctly, and the ability to rollback will save you from losing your navigation along the way.
It is important to note that the software supports the installation of third-party maps, such as OpenStreetMap or Yandex.Navigator (with appropriate access rights and OS versions), which gives the user the freedom to choose their preferred mapping service.
Connecting additional devices and multimedia
Functionality Navitel E707 Magnetic is not limited to just navigation. The device is equipped with a USB port to which you can connect external drives, allowing you to view photo albums or video archives directly on the screen. Codec support allows you to play most popular formats without first converting the files.
One of the key features is support 3G modems. By inserting the operator's SIM card into a compatible modem and connecting it to the navigator, you get access to the Internet. This opens up access to online services: real-time traffic jams, weather forecasts, exchange rates, and even the ability to watch news or YouTube (with sufficient processor performance).
The device also acts as a speakerphone. Thanks to the built-in speaker and microphone, as well as support for Bluetooth headsets, you can make calls without being distracted from driving. The voice of the interlocutor is heard clearly, and the noise reduction system cuts out engine and road noise.
| Function | Description | Requirements |
|---|---|---|
| Video | Watching movies | MP4, AVI formats |
| Audio | Music player | MP3, WMA |
| Photo | Viewing Images | JPEG, BMP, PNG |
| Communication | Bluetooth Hands-free | Smartphone with BT |
Using a navigator as a multimedia center is especially important on long trips. While the driver is focused on the road, passengers can watch movies or listen to audiobooks by connecting headphones or using external speakers via the AUX output (if supported) or FM transmitter.
Setting up routing and voice control
For comfortable operation, it is important to correctly configure the navigation profile. In the settings menu, you can select the type of transport: car, pedestrian, bicycle or even truck, taking into account the dimensions. Route construction algorithm will vary depending on the selected profile, excluding areas prohibited for this type of vehicle.
Voice prompts are an indispensable assistant. You can customize them for yourself: select the language, gender of the speaker, level of detail and time of maneuver warning. For example, you can set a turn warning 200 or 500 meters in advance, whichever is more convenient for you. The function is also available Text-to-Speech, which reads street names rather than just saying "turn left".
Use the "Home" and "Work" function to quickly build a route. Having specified these coordinates once, you can build a route to them in one click, without entering the address each time again.
In difficult situations, when the route was laid incorrectly or you took a wrong turn, the system automatically performs a recalculation. The speed of recalculation depends on the complexity of the interchange, but usually takes a few seconds. You can also manually add a detour point if you know about an accident or road repairs ahead.
- 🎙️ Voice: Select speaker and interface language.
- 🚛 Transport: Adjusting dimensions for trucks.
- 🏠 Favorites: Quick access to frequently visited places.
⚠️ Attention: Do not engage in complex route settings on the go. All settings, address entry and parameter changes must be made only with the vehicle stopped. This is a safety rule, violation of which can cost your life.
The “Navigation Simulation” function allows you to drive a virtual route in advance to understand the logic of movement in an unfamiliar city. This is especially useful when planning a trip with a large truck or when driving through difficult junctions in Moscow or St. Petersburg.
Typical faults and solutions
Like any electronics, Navitel E707 Magnetic may experience software glitches. The most common problem is that the device does not see satellites. In most cases, this is resolved by going out into the open and waiting for 5-10 minutes for a “cold start”. If the problem is persists, it is worth checking the COM port settings in the engineering menu.
Another common issue is the failure of the touchscreen to respond to touches. This is often solved by calibrating the screen, which is available in the settings menu. Also, the cause may be adhered dirt or the use of low-quality protective film, which distorts the signal. In winter, the device may take a long time to turn on due to the low battery temperature.
Most software failures can be resolved by completely rebooting the device (Reset) or resetting the settings to factory settings through the "System" menu.
If the navigator stops charging, the problem may be in the USB cable or in the device connector itself. Cables often break at the base. Checking charging with a different cable or from a different power source (power bank) will help isolate the problem. If the device gets hot, it may have been exposed to direct sunlight, which is dangerous for the lithium battery.
- 🔌 Charging: Checking the cable and power supply.
- 📡 Satellites: Antenna calibration and cold start.
- 💾 Memory: Clear cache and check memory card.
In case of complete inoperability (black screen, lack of response to buttons), the device may need to be re-flashed. This is a more complex procedure that requires downloading a special system image and using a firmware utility. Before doing this, be sure to read the instructions for your specific version of hardware.
Frequently asked questions (FAQ)
Is it possible to use the navigator without the Internet?
Yes, Navitel E707 Magnetic completely autonomous. Maps are stored in internal memory and accessed via GPS/GLONASS satellites. The Internet is needed only to update maps, traffic jams and online services.
What is the maximum memory card capacity supported?
Officially announced support for microSD cards up to 32 GB inclusive. Using larger cards (64 GB or higher) may result in unstable operation or the device may not be able to see files.
Does the magnetic mount work in cold weather?
Yes, magnetic properties do not depend on temperature within the operating range of the vehicle. However, the suction cup on which the platform is held may become less elastic in severe frost, so it is recommended to warm up the interior before the trip.
How to reset settings to factory settings?
This is usually done through the menu Settings → Other → Factory settings. There is also a hidden button on the case Reset, which must be pressed with a thin object (a paperclip) when the device is turned off.
Why does the navigator take a long time to search for satellites?
This may be a "cold start" after a long period of inactivity or moving over a long distance. The signal can also be shielded by metal tinting, a windshield visor or a garage. Give the device time (up to 15 minutes) for the first search.