Finding your favorite radio station on the air often becomes a task with an asterisk, especially when it comes to such popular projects as Our radio. Many drivers and music lovers are faced with the need to know exactly the operating frequency in order to easily set up a receiver in a car or home tuner. It is the range FM (Frequency Modulation) remains the most stable and high-quality way to listen to music on the go.
In this article we will look in detail at what frequencies the station operates, how to find it in your city and what to do if the signal is interrupted. Digital broadcasting and analog signal have their own characteristics that must be taken into account to obtain clear sound. Understanding how radio waves work will help you avoid unnecessary interference and enjoy the best hits of Russian rock.
It is worth noting that network coverage is not always uniform, and different frequency plans may be used in different regions. In Moscow and the Moscow region the main broadcast frequency is 101.7 MHz, however, as you move around the country these values will change. Below we will provide up-to-date information and practical setup tips.
Features of the FM band and broadcasting standards
Range FM, or frequency modulation, is the global standard for transmitting high-quality audio signals. Unlike ultrashort waves (VHF), which were historically used in the USSR, modern FM band covers frequencies from 87.5 to 108.0 MHz. It is in this interval that he broadcasts Our radio, providing listeners with stereo sound and minimal noise.
It is important to understand that the range of one transmitting station is limited. Typically it ranges from 20 to 60 kilometers depending on the terrain and transmitter power. Therefore, in large cities such as Saint Petersburg or Yekaterinburg, several repeaters can operate at different frequencies to provide continuous coverage.
The quality of reception directly depends on the sensitivity of your receiving device. Modern car radios are often equipped with a function RDS (Radio Data System), which allows you to not only display the track name, but also automatically switch to a stronger signal of the same station when moving. This is critical for long trips when you cross the coverage areas of different transmitters.
Use the AF (Alternative Frequency) function in the radio settings so that the receiver itself looks for the best frequency for your station when driving along the highway.
Broadcasting frequencies in major cities of Russia
The broadcasting geography covers almost the entire territory of the Russian Federation. However, as mentioned earlier, there is no single frequency for all regions. Each city has its own channel to avoid interference with neighboring settlements. For Our radio Characteristic is the use of “windows” in the etheric grid, which may not be obvious without a reference book.
Below is a table with the main frequencies in cities with a population of over a million. This data is relevant for the current period, but it is always worth checking local changes, since the frequency plan can be adjusted by the regulator.
| City | Frequency (MHz) | Transmitter power | Coating features |
|---|---|---|---|
| Moscow | 101.7 | 5 kW | Dense coverage, reflections are possible |
| Saint Petersburg | 105.9 | 4 kW | Stable signal in the center, weaker in the area |
| Yekaterinburg | 104.0 | 2 kW | Good welcome within the city |
| Novosibirsk | 107.4 | 3 kW | Covers the city and suburbs |
| Kazan | 100.9 | 2 kW | High-quality stereo signal |
If you are in the suburbs or driving on the highway, the frequency may change. For example, leaving Moscow towards the area, you may notice a transition to 99.2 or 103.5 MHz depending on the direction. This is a normal situation that requires either manual reconfiguration or the presence of an automatic search function.
How to set up a station search on a car radio
The process of setting up a radio in a car may differ depending on the model of the head unit. However, the general algorithm for searching Our radio in the range FM remains similar for most systems. The first step is to switch to radio mode by pressing the button Radio or Source until the corresponding indicator appears.
Next you need to select a range FM (sometimes referred to as FM1, FM2 or FM3). If you know the exact frequency for your region, use a manual search. To do this, hold down the frequency buttons (usually the left/right arrows or) to quickly scroll, or use a short press for 0.1 MHz steps. Enter, for example, 101.7 for Moscow.
If the exact frequency is unknown, run the function Autostore or Auto Scan. The radio itself will scan the entire range and save the stations with the best signal quality into memory. After scanning is complete, simply scroll through the saved presets until you hear the characteristic sound of a guitar and the DJ's voice Our radio.
☑️ Setting up the radio in the car
⚠️ Attention: When setting up the antenna, make sure that it is fully extended (if it is telescopic) or properly connected. Poor antenna cable contact is the main cause of hiss and loss of stereo even at the correct frequencies.
Reception problems: interference and how to fix it
Even when knowing the correct frequency, listeners may experience degraded audio quality. Main enemies FM signal are physical obstacles and electromagnetic interference. In urban environments, the signal often reflects off high-rise buildings, creating a multipath effect that results in crackling and interruptions.
The car itself can also be a source of problems. Low-quality chargers for smartphones, operating on the principle of pulse converters, often create powerful interference in the range of 88-108 MHz. If, when charging is connected, the reception quality Our radio falls, try replacing the cable or power supply with a shielded one.
Another reason may be the distance from the transmitting center. In “radio shadow” zones (behind hills, in deep relief depressions), the signal may disappear completely. In such cases, only moving or switching to alternative audio sources helps, since the physics of radio waves does not allow them to penetrate the thickness of the earth.
Why does the stereo disappear?
Stereo mode requires a stronger signal than mono. When the signal level drops below a certain threshold, the radio automatically switches to mono mode to maintain speech intelligibility. If you see the Stereo indicator blinking or going out, you are at the edge of the reception area.
Listening online: an alternative to broadcasting
In the era of mobile Internet, listening Our radio not tied to geography and the presence of radio towers. The official application or website of the radio station allows you to broadcast the stream in high bitrate, which often provides sound quality higher than compressed FM format. This is especially true for regions where broadcast coverage leaves much to be desired.
To listen online you will need a stable 4G/LTE or Wi-Fi connection. The advantage of digital streaming is the absence of geographical boundaries: while on a business trip in another country, you can listen to the same programs as at home. Additionally, many apps allow you to pause or rewind tracks, which is not possible in a live broadcast.
However, it is worth remembering about traffic consumption. An hour of listening to radio in high quality can “eat up” from 50 to 100 MB of Internet traffic. Therefore, when traveling abroad or with a limited tariff, it is recommended to download your favorite playlists or podcasts in advance for offline listening.
RDS Signal Specifications
Modern broadcasting Our radio accompanied by the transfer of service information via the protocol RDS. This technology allows text data to be transmitted along with an audio stream. On the display of the radio you can see the name of the current song, the name of the artist, as well as news or advertising messages.
One of the key features of RDS is TP (Traffic Program). If a station is broadcasting traffic news, compatible navigation systems can automatically mute the music or interrupt it with a voice message about traffic jams or accidents. For Our radio this is especially true during rush hours in large cities.
There is also a function PTY (Program Type), which classifies the transmission. Our radio is usually labeled "Rock" or "Pop Rock". This allows radios with a search by program type function to automatically find stations playing music of the desired genre, ignoring news or classical channels.
The presence of an RDS indicator on the display of the radio is a sign of high-quality signal reception, sufficient to transmit not only sound, but also text information.
Frequently asked questions (FAQ)
Why does our radio play on different frequencies in different parts of the city?
This is done to avoid mutual interference. Transmitter power is limited, so to cover a large city or agglomeration, a network of repeaters is used, operating at different frequencies, but synchronized in content.
Is it possible to listen to Our radio in DAB+ digital format?
In Russia, the DAB+ (digital terrestrial radio) standard is poorly developed and is not widespread. Most stations, including Our Radio, continue to broadcast in the analog FM band, which is supported by any receiver.
What to do if the frequency 101.7 is received with hissing?
Try to find an alternative frequency for your city (see table above). If there are no alternatives, check the antenna. While moving, the hiss may disappear due to a change in the position of the antenna relative to the transmitter.
Does Our Radio work in Crimea and on what frequencies?
Yes, the radio station broadcasts in Crimea. In Simferopol this frequency is 106.1 MHz, in Sevastopol - 101.3 MHz. The frequency plan in the region is integrated into the all-Russian broadcasting network.