Too low loading level of linen makes you constantly bend over, which causes low back pain and discomfort during daily operation of equipment. Raising the unit to a comfortable height is not just a matter of aesthetics, but a necessity for maintaining the health of the back and ease of use of the hatch. Owners often look for reliable bases that can withstand the vibrations of spinning and the weight of wet linen without losing stability.
Solving the problem of low location washing-machine It requires a comprehensive approach to the choice of support. In the modern market there are many options: from ready-made factory cabinets to homemade structures made of durable materials. It is important to consider not only the height of the lift, but also the ability of the base to extinguish the fluctuations that occur during the operation of the drum.
Ready-made stand-stands for washing machines
The most civilized and safe solution is to buy a specialized service. washing-machine. Such designs are developed by engineers taking into account the weight of the equipment, load distribution and vibration level. They are usually made of moisture-resistant chipboard, MDF or metal coated with an anticorrosive composition. The main advantage of finished products is the presence of a flat surface and often built-in shelves for storing household chemicals.
When choosing a cabinet, you need to pay attention to the material of the legs and bottom. The bottom should be strengthened so that a deflection under the weight of 60-80 kg does not lead to a distortion of the unit. The legs are often equipped with height-adjustable elements, which allows you to compensate for the irregularities of the floor. Some models IKEA or specialized brands have a base that protects the bottom of the furniture from splashes and dust.
- 🏆 The monolithic design provides maximum stability even at high spin speeds.
- 💧 The moisture-resistant coating prevents the material from swelling in the event of leakage of hoses.
- 📏 The standard height of such booths is 85-90 cm, which is ideal for ergonomic-loading.
It is worth noting that the installation of equipment on furniture requires a perfectly flat floor. If the base wobbles, the vibration will quickly destroy the material structure or cause the machine to shift. Therefore, before installing, be sure to check the horizontality of the surface level.
Metal supports and adjustable bases
Alternative to massive tubes are the lungs metal-staff, which raise the technique by 10-15 cm. They are a welded frame of profile pipe, often painted with powder paint. Such designs do not cover the side walls of the machine, which can be important for interior design or providing access to communications from the side.
Particular attention should be paid to models with anti-vibration overlays. Rubber pads on the upper supports of the frame extinguish the vibrations, preventing the machine from “walking” on the floor. This is critical for the long service of bearings and motor. Metal, unlike wood, is not afraid of water, but can rust when in constant contact with a moist environment, so the quality of painting plays a key role.
⚠️ Warning: When installing on a metal frame, make sure it has a wide profile of supports, otherwise narrow legs can push linoleum or damage the flooring.
Some users combine metal bases with additional elements to increase height. However, it is worth remembering that the higher the center of gravity, the stronger the inertia during pressing. Optimal height is considered to be up to 20 cm without additional attachment to the wall.
Building a brick or concrete pedestal
For those who are planning a major renovation of the bathroom or laundry room, the ideal solution will be the construction of a stationary bathroom. brick-stone. This is the most reliable option, which completely eliminates the wobbling. Brick or foam block is laid on the solution, creating a monolithic base of any necessary height. The surface of such a pedestal is usually aligned with a screed or lined with tiles.
The main advantage of a concrete or brick platform is its inertia. The massive base absorbs vibration better than any rubber leg. Inside the pedestal, you can leave niches for storing pelvis, powders or laying water supply and sewerage pipes, hiding communications from the eyes. It is only important to provide waterproofing so that in the event of an accident, the water does not flood the neighbors from below.
The construction process requires accurate calculations. You need to know your size in advance. washing-machine and leave technological gaps on the sides (usually 1-2 cm) for hoses and vibrations. It is also worth laying in the design the ability to access the drain filter, if it is located in front at the bottom.
- 🧱 Maximum strength and absence of moving elements guarantee silence of work.
- 🎨 The ability to tile the pedestal in the color of the walls makes the design part of the interior.
- 🛠 The interior space can be used for hidden pipe installation and storage.
Use of construction materials for temporary lifting
In situations where there is no opportunity to buy a table or build a pedestal, users often resort to the use of improvised building materials. Beam, thick plywood or aerated concrete blocks can serve as a temporary solution. However, it is extremely important to observe security measures. The tree is hygroscopic and over time can deform from moisture, which will lead to a distortion of the machine.
If you decide to use wood-barChoose hard woods and be sure to treat them with antiseptic and moisture-repellent varnish. The beam must be wider than the supporting legs of the machine to distribute the pressure. Put under the legs of small pieces of wood is absolutely impossible - this will lead to an instant loss of stability.
Aerated concrete blocks are a more stable option than wood, but they also require water protection. Their surface is porous and quickly absorbs moisture, which can lead to the destruction of the material and the appearance of mold. The blocks must be painted or wrapped with waterproofing film. In any case, such designs are considered temporary and require regular stability checks.
Comparison of characteristics of different types of bases
To finally decide on the choice, it is worth comparing the main parameters of different solutions. Each option has its advantages and disadvantages, which become noticeable during long-term operation. Below is a table that helps you organize the data and choose the best option for the specific conditions of your bathroom.
| Type of base | Max. height | Vibration quenching level | Difficulty of installation | Cost |
|---|---|---|---|---|
| Ready-made cabinet | 15–20 cm | Medium. | Low. | Medium/High |
| Metal frame | 10–15 cm | High-pitched | Low. | Low. |
| Brick pedestal | Anybody. | Very tall. | Tall. | Medium |
| Wooden timber | 5-10 cm | Low. | Medium | Low. |
The table shows that brick-plate It gains in stability and the possibility of customization of height, but loses in mobility. Bulbs and frames are easier to install, but limited in height. The choice depends on your priorities: durability and capitality or simplicity and speed of the decision.
The impact of lifting on the washing machine
Raising washing-machine It changes its hydraulic characteristics. The standard height of the drain hose installation is usually regulated by the manufacturer (often 60-90 cm from the floor). If you are lifting the car, the height of the drain point relative to the sewer entrance may change, which requires a review of the connection scheme.
If the drain loop is too low relative to the water level in the machine, the siphon effect can occur when the water constantly goes away by gravity or, conversely, is thrown back from the sewer. If you lift the car too high, the pump may not cope with the pumping of water to a given height, especially if the hose is long and has many curves. Instructions Bosch or LG clearly indicates the limit values of the height of the drain.
⚠️ Warning: Make sure that when lifting the machine, the drain hose is not stretched and does not have sharp inflections at the base. This can cause the pump to break or leak.
In addition, the increased height increases the lever of force when vibrating. If the car is not perfectly exposed to the level, it can start to “jump” more than on the floor. Therefore, adjusting the support legs after mounting is a mandatory procedure. Use the building level by checking the position on both diagonals.
Frequently Asked Questions (FAQ)
Can I put a washing machine on a regular wooden table?
It's not recommended. Regular furniture is not designed for dynamic loads and vibration. The table quickly shatters, and the car can fall, damaging itself and causing damage to property.
Do I need to fasten the car to the floor when installing on a pedestal?
If the pedestal is high (more than 30 cm) or stands on a slippery surface, fixation is desirable. For low tubes, high-quality leg adjustment and stability check are enough.
How to lift a car if it is already installed in a niche?
This is a difficult task that requires dismantling the machine. It is necessary to disable communications, remove the unit, mount the base and install the equipment back. In some cases, it is easier to replace the lower part of the cabinet with a higher one.
Does the lift affect the manufacturer’s warranty?
The rise on a certified stand alone does not affect. However, if the breakdown is caused by a fall due to an unstable homemade design, warranty repair will be refused.
What is the optimal height for loading clothes?
The optimal height is considered, at which the lower edge of the hatch is at the level of 70-80 cm from the floor. This allows you to load the linen, only slightly leaning, without deep squats.