In the world of computer simulators, there is rarely a project that would immerse the player in the realities of car maintenance in such detail as My Summer Car. Here it is not enough just to click the "buy" button - you will have to personally assemble the car from scratch, including the installation of wheels and the suspension setting. The wheels become the critical element in determining whether you will make it to the store or get stuck in the mud along the way.
Many beginners underestimate the importance of the right rubber selection, focusing only on engine power. However, even the most powerful engine will not be able to realize its potential if the car is equipped with improper tires or has incorrect pressure. In this guide, we will discuss all aspects of working with wheels in the game.
You will learn about the available sizes, features of the selection of discs for racing Satsuma and the subtleties of mechanics that affect controllability. Understanding these processes will help you not only build a reliable car, but also win the legendary race on the island.
The range of tires and their characteristics in the game
In the game store. Teimo's Shop The player is offered a limited but functional choice of rubber. The main difference lies in the size and purpose: standard road tires for everyday driving and racing options for the track. Standard tires provide basic grip, but wear out quickly when driving aggressively.
Racing tires, often referred to as “slicks”, have significantly better grip on asphalt, which is critical for cornering at high speed. However, they have a significant drawback - they wear off very quickly if used on gravel roads or if the wheels collapse incorrectly.
It is worth noting that the quality of rubber directly affects fuel consumption and acceleration dynamics. A too soft or worn tire will create additional rolling resistance. For best results, it is necessary to monitor the condition of the tread and change the set in a timely manner.
When buying, it is important to pay attention to the diameter, since it must strictly correspond to the selected set of disks. Incorrect selection will lead to the inability to install or incorrect operation of the vehicle physics.
Wheel sizes and disc compatibility
Car SatsumaThe Datsun 100A prototype has specific wheel size requirements. In the stock version, the machine is equipped with 12-inch diameter disks. However, to improve performance, many players are looking to install wider and larger wheels.
The most popular upgrade is the switch to 13-inch drives, which can often be found in a landfill or bought in specialty stores inside the game.
Below is the compatibility table of the main sizes available in the game:
| Type of disk | Diameter (inches) | Recommended tyre | Note |
|---|---|---|---|
| Stock Steel | 12 | 145/80 R12 | Basic equipment |
| Rally Steel | 13 | 155/70 R13 | Improved sustainability |
| Alloy Wheel | 13 | 165/60 R13 | Weight loss |
| Racing Slick | 13 | 175/50 R13 | Just for the asphalt. |
Installing larger diameter discs without changing other suspension parameters can cause the wheels to start touching the body when fully loaded or in corners. This causes a characteristic knock and accelerates the wear of rubber.
Where can I find rare discs?
Rare alloy wheels can often be found in a scrap heap. Use a detector or just look carefully at the heaps. They can also be awarded as prizes in mini-games or bought from special NPCs for a high price.
The process of installing and balancing wheels
Installation of the wheel in My Summer Car - it's not just a click. You will need to physically hold the disc to the hub, make bolts and then tighten them. For this purpose, a wrench is used, which must be twisted until a characteristic click or visual confirmation of the puff.
The procedure for installation is as follows:
- 🛠️ Take the wheel in your hands and bring it to the hub, combining the holes.
- 🔩 Insert the mount bolts (usually 4 pieces) from your hand to lock the disc.
- 🔧 Use the end key to tighten the cross-cross bolts for a uniform fit.
- 💨 Check the tire pressure with a pressure gauge and pump if necessary.
Do not forget that poorly twisted bolts can lead to a tearing of the wheel at high speed, which is guaranteed to end in an accident. Always check the reliability of the attachment before leaving.
Balancing in the game is implemented simplified, but if you feel the steering wheel beating at speed, it is possible that the disk has a defect or damaged tire geometry. In this case, the wheel should be replaced.
☑️ Pre-departure checks
Pressure adjustment and impact on physics
Tire pressure is one of the most important parameters that affect the behavior of a car on the road. In the game, as in reality, under-performed tires increase the contact spot, which improves grip on the gravel, but increases the risk of breakdown and overheating.
Over-pumped tires make the car stiffer and faster on flat asphalt, but drastically reduce traction on bumps. The optimal value for a standard drive is considered to be a pressure in the region of 2.0-2.2 bar.
For racing races, the settings change. On dry asphalt, the pressure can be raised to 2.5 bar to reduce rolling resistance. On a wet track or gravel, the pressure is better lowered to 1.6-1.8 bar for a better "hack".
⚠️ Warning: Too high pressure in hot weather can cause the tire to explode due to air expansion. Keep an eye on the temperature of the tires during long races.
Check the pressure with a pressure gauge regularly, as in the game it can slowly fall over time or after falling into pits. Ignoring this parameter will make the control of the machine unpredictable.
Use a compressor in the garage to quickly pump all four wheels to the same value before each trip.
Racing suspension pumping
For successful performance in the races of standard suspension Satsuma Not enough. You will need to install reinforced springs and shock absorbers, which can be purchased at the auto parts store. This process requires removing the wheels and dismantling the old elements.
The modernization process involves replacing springs with stiffer ones and installing adjustable shock absorbers. This allows you to change the clearance of the car and adjust the suspension rigidity for a particular track.
The main stages of suspension tuning:
- 🚗 Lift the car on the jack and remove the wheels.
- 🔩 Unscrew the mounts of old shock absorbers and springs.
- 🆙 Install new sports components while following the assembly order.
- 🔧 Adjust the pre-traction of the springs to achieve the desired body height.
After installing new components, be sure to check the wheel installation angles. Incorrect adjustment can lead to rapid wear of the inner or outer part of the tread.
The rigid suspension improves handling on the track, but makes a trip on the dirt roads of the island extremely uncomfortable and dangerous for the integrity of the body.
Typical mistakes and expert advice
Beginners often make the mistake of installing wide racing tires on standard drives. This leads to deformation of the tire profile (the “mushroom effect”), which impairs handling and can cause the wheel to unravel in a turn.
Another common problem is ignoring the state of the tread. Riding bald rubber on a wet road in the game leads to aquaplaning similar to real. The car stops obeying the steering wheel and slides in a straight line.
You should not save money on buying new tyres for racing. The B/U rubber from the landfill may have hidden cord damage that will only manifest at high speed, leading to instant rupture.
⚠️ Note: When changing the size of the wheels, be sure to check whether they do not touch the body elements when turning the steering wheel to the end. This can damage both the tire and the arch of the car.
Remember that the perfect setup is a trade-off between speed, grip and durability. Experiment with pressure and rigidity to find your perfect balance.
How often do I need to change my summer car tires?
The frequency of replacement depends on the driving style and type of coverage. Racing slicks on the pavement can serve several races, while riding them on the gravel roads of the island will destroy the tread for a couple of kilometers. Standard tires are more durable, but require replacement when visible damage or severe wear of the pattern.
Can I use different tires in front and back?
Technically, the game allows you to install different sets, but this is extremely not recommended for beginners. Different axle adhesion coefficients will lead to unpredictable arrogance (oversteering or understeering), which is difficult to control, especially in rain.
Does the color of the disk affect performance?
No, the color of the disc is in My Summer Car It is a purely cosmetic parameter. It only affects the visual perception of the car, but has nothing to do with the weight, strength or aerodynamics of the wheel.