Find information about the location of large industrial facilities, such as Likinsky bus factoryIt often becomes a necessity not only for logistics and drivers, but also for ordinary citizens who want to buy equipment directly or find a job. The request “where is LiAZ” may seem simple, but geographical reference to a specific city and district requires clarification, especially given the presence of the same place names in the Moscow region. The plant, which is one of the oldest and largest manufacturers of bus equipment in Russia and CIS countries, is located in the city. Likino-DulyovoIt is often confused with the city of Likino-Davykovo or simply searched on the map by abbreviation.
The relevance of the question of where LiazIt is also dictated by the development of logistics chains and the need to deliver spare parts or finished products. For those who are planning a visit to the headquarters or production sites, it is important to understand not only the coordinates, but also the specifics of the access roads, since the industrial zone has its own navigation features. In this article, we will analyze in detail all aspects of the location of the enterprise, consider the options for travel on various types of transport and specify the exact coordinates for navigators.
It is worth noting that Likinsky bus factory holding GAZ GroupThis imposes a certain corporate style on the organization of the access mode and visitors. Therefore, before you go on a journey, you need to clearly represent the end point of the route. Below we will provide comprehensive information to help you avoid mistakes when planning your trip and save time.
Geographical location: city of Likino-Dulyovo
The answer to the question “Where is LiAZ” is the city. Likino-DulyovoLocated in the Orekhovo-Zuevsky urban district of the Moscow region. It is not just a village or a neighborhood, but a full-fledged city with a developed infrastructure, which arose around a textile factory and later became the center of mechanical engineering. Geographically, the object is linked to a specific address: street Kalmarnaya, house 1. It is at this address that the main administrative buildings and assembly lines are located.
It is important not to confuse the city of Likino Dulevo with the neighboring city. Orekhovo-ZuevoThey are in close proximity to each other. The distance between the centers of these settlements is only a few kilometers, but navigation systems can route through industrial zones or bypass roads, which increases travel time. For accurate positioning, it is best to use coordinates that eliminate any ambiguities when searching.
Industrial area where it is based liazazIt occupies a significant territory bordering with forest areas and residential areas. Squid Street It runs parallel to the main transport arteries, providing a convenient access for freight transport, which is critical for the logistics of finished products. If you use paper maps or old directories, make sure they are up-to-date as the city’s infrastructure is constantly evolving.
The exact address of the plant: Moscow region, . Likino-Dulyovo, st. Squid, d. 1. Don't confuse it with Orekhovo-Zuevo.
How to get there by car: routes and navigation
When planning a trip by private car, it should be borne in mind that Likinsky bus factory It is located about 80-90 kilometers east of Moscow along the highway. M-7 Volga or M-12 East.. The choice of route depends on the current traffic situation and the type of vehicle. For passenger cars, the most popular is the path through Balashikha and Noginsk, where the road surface is usually in satisfactory condition.
When driving on the track M-7 You need to turn towards Orekhovo-Zuevo, and then follow the signs to Likino-Dulyovo. For heavy trucks and road trains following the products of the plant, special entries are provided, since the dimensions of the plant are LiAZ bus They require spacious spaces for maneuver. In navigation systems (Yandex.Navigator, Google Maps, 2GIS) it is best to set the end point not just a city, but a specific street.
- 🚗 Route through Noginsk: Move along the Gorky highway (M-7) to the turn to Noginsk, then through Electrougli and Staraya Kupavna follow the signs to Orekhovo-Zuevo/Likino-Dulyovo.
- 🚛 Route for trucks: It is recommended to use bypass roads around Noginsk and Orekhovo-Zuyevo to avoid tonnage restrictions in the city center.
- 🛣️ M-12: The new high-speed toll section allows to significantly reduce travel time from Moscow, but the congress to Likino-Dulyovo will require a careful study of interchanges in the Orekhovo-Zuevo area.
It is worth noting that in the area of the plant often ply trucks with finished products, so when approaching the plant. squid Particular care should be taken. Parking for visitors is usually organized at the main entrance to the administrative building, but for freight transport there are separate zones, which are better to check in advance in the logistics department.
Public transport: trains and buses
For those who do not have the opportunity to use a personal car, the question "where LiAZ" is solved through the public transport network of the Moscow region. The most reliable and predictable way to get to the city of Likino Dulevo is to electric. From the Kursk railway station in Moscow regularly depart trains direction "Moscow — Vladimir" or "Moscow — Nizhny Novgorod", which make a stop at the station. Liquino.
Travel time on the train ranges from 1 hour 40 minutes to 2 hours 10 minutes depending on the type of train (regular or express). Station Liquino It is located relatively close to the industrial area, but you will still have to walk about 15-20 minutes from the station to the passing plant or use local bus routes. It is better to check the schedule on the website of the CPPK or in the application "Yandex.Schedules", as it can change on weekends and holidays.
The bus service is also well developed. From Moscow, from the bus station "Shchelkovsky" (Shchelkovsky metro) there are regular regular shuttle buses to Orekhovo-Zuevo and Likino-Dulyovo. In addition, local routes run inside the city itself, connecting residential areas with the industrial zone.
- 🚆 Electric trains: Kursk direction, station "Likino". The interval of movement during peak hours is 20-30 minutes.
- 🚌 Buses from Moscow: Routes from the metro station "Shchelkovskaya" (No. 337, No. 446 and other express options).
- 🚏 Local routes: Buses No 1, No 2, No 12 and others, following through the street Squid or streets.
When planning a public transport trip, keep in mind that the plant operates in one or two shifts, and the bulk of the employees arrive in the morning. Therefore, in the interval from 7:00 to 8:30 in the morning there is an increased passenger traffic. If you are heading to the HR department or on a tour, it is better to choose a time after 10:00, when the transport load decreases.
When buying a ticket for the train, check whether the train stops at the station "Likino", and not "Dulyovo" or "Orekhovo-Zuevo", as these are different points.
Contact details and mode of operation of the passage
Knowing where it is. liazazIt is also necessary to have up-to-date information about the operating mode of the enterprise and the contacts of services that provide visitor access. The plant is a safe facility and free access to the production areas is limited. To solve issues related to the purchase of equipment, service or employment, you should contact the relevant units.
The central entrance hall, through which access to the administrative building is provided, operates in accordance with the schedule of administrative staff. Usually these are weekdays from 8:00 to 17:00, with a break for lunch. However, for freight transport and production shop staff, the schedule may be shiftable, including night time. All details of the pass mode must be agreed in advance.
| Division | Phone. | Schedule of work | Address for correspondence |
|---|---|---|---|
| Admissions Director | +7 (496) 418-XX-XX | Mon-Pet 9:00-18:00 | 142380, MoD, G. Likino-Dulyovo, st. Squid, 1 |
| Sales department | +7 (496) 418-XX-XX | Mon-Pet 8:30-17:30 | slack Squid, 1, Corp. And |
| Staff division | +7 (496) 418-XX-XX | Mon-Pet 9:00-17:00 | slack Squid, 1, administrative entrance |
| Service service | 8-800-XXX-XX-XX | Daily 24/7 (dispatcher) | slack Squid, 1, entrance number 2 |
Please note that phones can change, so before visiting it is highly recommended to check the current numbers on the official website. GAZ Groups Or in the help desk. To issue a one-time pass to the territory of the plant, a passport and a preliminary application from the receiving party are required.
⚠️ Attention: Entrance to the territory of the plant without a pre-issued pass is prohibited. Security has the right to keep a visitor out, even if they know the exact address, without consulting the internal security services.
Logistics and shipment of finished products
For partners and customers who are taking equipment from the plant, it is critical to understand the logistical nuances. Likinsky bus factory ship equipment both by its own course (distillation) and on specialized trucks. Shipment sites are located deep in the industrial zone, and you can get there only through special gates designed for finished products.
The process of obtaining equipment requires the execution of a set of accompanying documents, including PTS, acts of acceptance and transfer and insurance policies. These processes are usually overseen by sales managers who assign the exact time and place of the meeting. Self-searching for an unaccompanied shipping site can take a long time due to the complex internal navigation of the enterprise.
Features of bus transportation
When driving, make sure that the driver has valid licenses of the appropriate category (D or D1) and the tachograph is installed and activated. Also check the availability of transit numbers or the possibility of obtaining them in the nearest IREO.
In winter, logistics can be complicated by weather conditions. Shipment sites are regularly cleaned, but with heavy snowfall delays are possible. Liaz busesPrepared for the harsh Russian conditions, however, require careful rollout from warm hangars in the cold to avoid thermal shock for the units and assemblies.
- 📄 Documents: Passport of the representative, power of attorney from the organization, travel list.
- ⛽ Fuel: The equipment is shipped with a minimum amount of fuel in the tanks, refueling is made at the nearest gas stations outside the plant.
- 🔍 Inspection: External inspection and inspection of the equipment are carried out directly on the site before signing the act.
If you plan to pick up equipment on weekends, this should be coordinated with the shipping department at least 2-3 days, since only duty services work on Saturday and Sunday, and the speed of paperwork can be reduced.
Employment and excursions
The question "where is LiAZ" is often of interest to job seekers. The plant is a city-forming enterprise and one of the largest employers in the region. The HR department is located in the administrative building, where it should be sent for an interview. The company has its own internal labor rules.
Besides, Likinsky bus factory Periodically visited by organized groups: students of specialized universities, delegations from other regions and simply interested in the history of domestic engineering. Excursions allow you to see the assembly process bodywork, painting and final run-in, but they are carried out strictly by appointment and only accompanied by a guide.
☑️ What to take with you for an interview or excursion
For organized groups, an individual route is often developed, which may include a visit to the factory history museum, where legendary models of past years are presented, from the first trolleybuses to modern low-floor buses. LiAZ-5292. This is a great opportunity to see how the engineering thought of the enterprise has developed.
⚠️ Attention: Photography on production lines without special permission of the management is prohibited. This is due to the protection of trade secrets and assembly technologies.
Historical background and modernity
The history of the plant dates back to the 1930s, when it was decided to build a plant in Likino-Dulyovo for the production of logging equipment, which later, in the 1950s, was converted to the production of buses. Since then liazaz It has become synonymous with reliability and a recognizable brand on the roads of the whole country. The location of the plant in this place was not chosen by chance: the proximity to Moscow, the availability of labor and a developed transport network predetermined the success of the enterprise.
Today, the plant continues to develop, introducing new technologies and expanding the model range. Modern workshops are equipped with robotic welding and painting lines, which allows to produce equipment that meets the highest environmental standards (Euro-5, Euro-6). Despite changes in ownership and management structure, the geographical location has remained unchanged for almost 70 years.
Knowing where you are. liazazIt is useful not only for logisticians, but also for all who are not indifferent to the history of the domestic industry. The city of Likino-Dulyovo and the factory are a single organism, and the development of one directly affects the well-being of the other.
How to formulate the address for courier delivery of documents?
For courier delivery, use the full format: 142380, Moscow region, Moscow region, Moscow. Likino-Dulyovo, st. Squid, d. 1, AO "LiAZ", ATC (or a specific recipient). Please provide the recipient’s contact phone number as access to the area is limited.
Can I buy a LiAZ bus for a private person?
Yes, the plant works with both legal and physical persons. However, the buying process may be different from buying a car. It is necessary to contact the sales department to clarify the conditions, availability of equipment and the possibilities of leasing or credit.
Is there a museum at the factory?
Yes, there is a museum of the history of the plant on the territory of the enterprise. Visiting the museum is possible only as part of organized excursion groups in advance with the press service or public relations department of the plant.
What is the nearest town to the factory?
The plant is located directly within the city of Likino-Dulyovo. The nearest large city-neighbor is Orekhovo-Zuyevo (distance about 5-7 km). Also nearby are the villages of Dulevo and Anjievsky.