We mold a machine made of plasticine: step-by-step instructions

We begin to form the main body volume, rolling the cylinder out of plasticine and slightly flattening its upper part to get a streamlined shape of the hood and trunk. It is the quality of preparation of this basic element that determines the stability of the future model on the table surface. If you wish to plaything It looked realistic, immediately provide space for mounting the wheel arches, making small indentations on the sides of the cylinder.

To create a strong structure, it is important to choose the right one plasticineIt will not stick to your hands and quickly lose shape in the heat. Experienced craftsmen often mix several shades of the same color to achieve an interesting gradient or imitate a metallic shine on the surface. bodywork. The finished workpiece is still put aside to focus on the manufacture of the chassis, since it is the wheels that most often fall off at children's handicrafts.

First of all, we will make wheels, because without reliable support. model They will not be able to participate fully in the games. We take a piece of dark plasticine, divide it into four equal parts and roll them into perfect balls, which we then flatten into thick pancakes. The center of each wheel can be decorated with a small circle of silver color, imitating the diskThis will immediately give the product a factory look.

The mounting of wheels to the body requires special attention, because heavy corpus It can push soft supports. It is best to use thin sticks or toothpicks, inserting them inside the wheels and only then fixing them on the bottom of the car. If there is no wire frame at hand, make small plasticine stands in the form of rectangles under the wheels to construction It was not deformed under its own weight.

Now we move on to the most creative stage - the design of windows and doors that make motor-car recognizable. Thin flagella of contrasting color mark the contours of the glass, and then gently smooth the boundaries with your finger so that the surface becomes smooth. To simulate the glass, you can use a transparent gel or simply leave the depressions, filling them with blue. plasticine.

⚠️ Warning: Do not make the windows too large, otherwise the top of the body may become brittle and fall apart on the first touch.

Detailing is what distinguishes amateurism craftsmanship from the work of an experienced sculptor. Add headlights using small white or yellow balls, and don’t forget the bumpers in the front and back. So detail Hold tight, slightly soak your fingers with water before sticking small elements.

For those who want to create a more complex modelWe suggest paying attention to trucks or special equipment, where it is important to observe the proportions of the cabin and body. In such cases, the basis is better to make not from one piece, but to collect from several geometric shapes, carefully connecting them with each other. Truck It requires more massive wheels and a reinforced frame to support the weight of additional equipment or trailer.

When sculpting the truck cab, it is important to make the windshield wide enough, and the roof flat so that the model resembles the real one. transport. You can add side mirrors and even makeshift kung at the back if you're sculpting a tow truck or military vehicle. The main thing is that all parts are proportional to each other, otherwise. piece It's gonna look unnatural.

The final stage is the creation of decorative elements such as strips on the hood, license plates or checkers of taxis. Use thin rolled stripes plasticine contrasting colors, carefully superimposing them on the main surface. For the license plate, you can cut a small rectangle and squeeze the numbers on it with a toothpick or stack.

Ready. machine It is recommended to put on a flat surface and give it a little “rest” so that all the layers of plasticine are grasped together. If you have used different types of material, they may have different melting points, so it is best not to touch the product right away. After a while, yours job It will be strong enough for a game or exhibition.

The table below gives the basic parameters that will help you choose the right approach to sculpting depending on the age of the child and type. model.

If you plan to sculpt a whole collection Prepare the workplace in advance and spread the materials by colors. This will save time searching for the right shade and allow you to focus on the creative process. In addition, the presence of a wet wipe at hand will help to quickly clean your hands of excess fat and dye.

⚠️ Warning: Make sure small details don’t fall into the hands of young children who may accidentally swallow plasticine.

To create the effect of a racetrack or garage, you can use a cardboard base on which you will “plant” your car. motor-car. Road markings are easy to draw with a marker or lay out in thin strips of black and white plasticine. This approach will make the usual sculpting into a full-fledged play scene.

Experiment with shapes and sizes, creating not only standard cars, but also fantastic ones. transport future. Plasticine allows you to correct any error by simply rolling the part over or changing its shape. Yours. fantasy The only limiter in this exciting process.

Don't be afraid to combine. technique Sculpting by adding natural materials such as acorns or chestnuts to the work, which can make great wheels for a village cart or fantasy crew. Combining different textures will make you job It's unique and memorable.