Virtual garage in the simulator My Summer Car becomes a real test for the patience and attentiveness of every player. The “pieces” scattered throughout the map require a systematic approach to assembly, because without precise knowledge of the location of the components, the project Satsuma It will remain a pile of rusty metal. Understanding where exactly they are key nodes, allows you to save dozens of game hours that would otherwise be spent aimlessly wandering through forests and landfills.
The search process begins with basic inventory and gradually develops into a complex logistics operation to deliver units from the far corners of the map. Many beginners get lost, not knowing that some engine parts can only be found in indoor locations, such as a store Teimo's or even at the bottom of the lake. Proper navigation and knowledge of maps reduces the time spent searching for critical elements needed to start the engine.
In this article we will analyze in detail the localization of all the main components necessary for the complete assembly of a car. You will learn not only about where they lie body panels and suspension elements, but also get tips on how to install them effectively. Proper planning of search routes will turn chaotic collecting into a structured process of restoring the legend of the Finnish automobile industry.
Basic engine components and their locations
Power unit assembly Satsuma begins with the search for fundamental parts, without which further installation is physically impossible. The cylinder block, cylinder head and crankshaft are heavy elements, which are most often located in the immediate vicinity of the garage or in the house itself. The player should carefully inspect the area around the barn, as developers often hide large units under the stairs or behind the door.
Particular attention should be paid to locating the oil pump and camshaft, as these small but important details easy to lose in tall grass or among debris. If you don't find them right away, check the shelves inside the house, where parts forgotten by the previous owner sometimes end up. The absence of these components will make it impossible to assemble the lower part of the motor correctly.
To make it easier to find heavy parts, it is recommended to use a cart, which can be found at a landfill or purchased at a store. Drag and drop engine block manually takes a lot of effort and time, especially if the assembly point is far from the detection site. Using the right tool greatly speeds up the preparatory phase.
Use a cart to transport heavy engine parts, such as the cylinder block and gearbox, to avoid wasting your character's stamina.
Once all parts of the cylinder block have been located, they must be thoroughly cleaned of dirt and rust before installation. A dirty engine will be less easy to install, and the presence of corrosion can lead to errors during installation. tightening bolts. Cleanliness of the mating surfaces guarantees the tightness and durability of the assembled unit.
Fuel system and batteries
Engine operation is impossible without a working fuel supply system, so finding a tank, pump and carburetor is a priority. Fuel tank Satsuma often found in the basement of a house or in the back corner of a garage, sometimes it requires cleaning from years of deposits. The carburetor, which is the heart of the power system, usually sits on a bench or in a toolbox, waiting to be installed.
Gaskets and hoses are consumables, which are critical to the integrity of the system. Without new gaskets under the carburetor and fuel pump, it will not be possible to achieve stable engine operation, since the old material inevitably allows air or gasoline to pass through. In the game, it is important not to forget to change these little things, as they directly affect the ability to launch.
⚠️ Attention: Installing fuel hoses requires special care - incorrect connection can lead to gasoline leaks and a fire when the engine is first started.
The electrical part of the fuel system includes the fuel pump and associated wires that must be properly connected to the battery. Battery is another key element, which often has to be purchased again if the old one is completely discharged or damaged. Checking the electrolyte level and charge before installation will save you from unnecessary problems with sparking.
☑️ Checking the fuel system
Transmission and drive mechanisms
The gearbox and clutch transmit torque from the engine to the wheels, and searching for them often takes the player to a junkyard or auto parts store. Gearbox Satsuma is a massive unit that requires careful handling during transportation. It often lies next to other large nodes, but can be hidden in hard-to-reach places on the map, requiring careful study of the area.
The clutch disc and clutch basket are complex mechanical components, which wear out first and require replacement during assembly. In the game, it is important to install the disk on the correct side, otherwise the transmission will not work correctly. Errors in the installation of these components lead to the inability to shift gears or slipping.
Drive shafts connect the gearbox to the wheels, and their condition directly affects the transmission of traction. Rusted or damaged shafts can cause vibrations or even wheel separation at high speeds. Finding entire shafts can take time, as they are often scattered in different locations, including the area around the lake.
| Component | Probable search location | Need for replacement | Weight (relatively) |
|---|---|---|---|
| Gearbox | Landfill/Garage | Often required | Heavy |
| Clutch disc | Teimo's Store | Required | Lightweight |
| Drive shaft | Lake / Landfill | According to condition | Medium |
| Cardan shaft | Garage/Under the house | Rarely | Medium |
The secret to finding a transmission
The gearbox can sometimes be found disassembled if the player has previously experimented with dismantling cars in a junkyard.
Suspension, brakes and wheelbase
The safety and handling of your vehicle depend on the condition of the suspension and braking system, so looking for these components should not be put off until later. Shock absorbers, springs and suspension arms are often found lying in the grass around the garage or in a pile of scrap metal. Brake drums and pads require thorough cleaning of rust before installation, otherwise braking will be ineffective.
Wheels are one of the scarcest resources in the early stages of the game, as finding four whole rims with tires is quite difficult. The player has to combine the wheels found, look for balancing weights and constantly pump up the tires. The lack of normal wheels makes it impossible to even leave the garage for test drives.
- 🚗 Shock absorbers: Look in the garage or buy new ones if the old ones are leaking.
- 🛑 Brake pads: Require replacement for safety.
- 🔩 Suspension arms: Check for play and cracks before installation.
- 🎡 Wheels: Search all over the map, often hidden behind the house.
The steering is also part of the chassis system, and finding a steering rack or bipod can be a separate quest. Damaged steering components will cause the car to be uncontrollable on the road. It's important to find everything rods and tipsto ensure precision control.
Body parts and interior
The appearance and comfort in the cabin depend on the presence of all body panels, glass and interior elements. Doors, hood and trunk lid Satsuma often require leveling and painting before they can be installed in place. Finding intact glass can take a long time, as they break easily and are scattered around the map in the form of shards.
The car's interior is filled with small details such as the seats, dashboard and carpets that create a cozy feel. The lack of seats makes travel impossible, and the broken instrument panel makes it impossible to control engine parameters. Assembly of the interior is the final stage that turns a set of mechanisms into a full-fledged car.
⚠️ Attention: When installing glass, use special glue and let it dry, otherwise the glass will fly out the first time you slam the door or hit a bump.
Paint and polish are what separate a simply assembled car from a well-maintained example. Finding the right color spray paint and polish may require a trip to the store or searching through outbuildings. High-quality painting not only improves the appearance, but also protects the metal from further corrosion.
Tools for installation and assembly
To install all the “pieces” found, you need an appropriate set of tools, without which assembly will turn into torture. A garage wrench, a ratchet, a jack and a welding machine are basic set, which should be at hand. Not having the right tools can block progress, such as changing tires or installing an exhaust system without a jack.
Specialized tools, such as a torque wrench or valve adjuster, are required to fine-tune the engine. Proper tightening of the cylinder head bolts and connecting rods is critical to prevent engine failure upon first start-up. Ignoring tightening torques may result in catastrophic consequences for the assembled unit
⚠️ Attention: Do not try to tighten the cylinder head bolts without a torque wrench - overtightening will lead to gasket deformation and engine failure.
Organizing your workspace and having all the tools at hand speeds up the assembly process significantly. It is recommended to create an impromptu workbench or use a box to store small items so as not to constantly search nuts and bolts. Order in your tools is the key to successful and quick car assembly.
Having a complete set of tools and using them correctly is the key to success in building a My Summer Car.
Where can I find a starter for a Satsuma engine?
The starter is usually found in the garage, often on the floor or on a shelf, but can sometimes be found in a junkyard among other electrical items. If the starter is rusty, it will need to be cleaned and the brushes checked before installation.
How to properly install pistons in an engine?
The pistons must be installed with the arrow pointing towards the exhaust manifold (usually the marking on the piston). It is important not to mix up the rings and lubricate them with oil before pressing them into the cylinder.
What to do if there are not enough bolts for assembly?
Missing bolts and nuts can be purchased from Teimo's store or found in tool boxes scattered around the map. Also, sometimes useful bolts are lying right in the grass around the garage.