Motip in cans is not just paint, but a professional solution for local paintwork repairs, which, when used correctly, is not inferior to painting in a chamber. If you notice a chip on your bumper Volkswagen Golf 2018 or a scratch on the door Toyota Corolla, spray can Motip with exact color code (for example, LA7W for silver metallic) will eliminate the defect without streaks or tone transitions. But 70% of painting failures are associated with improper surface preparation or the choice of the wrong series of paint - we will talk about this later.
Unlike cheap analogues, Motip offers not only basic colors, but also specialized series: Motip Dupli-Color for metallics, Motip Premium with increased hiding power, and even Motip Flex for plastic bumpers. However, even with the right spray can, the result depends on the application technique: distance 20–25 cm, air temperature +18...+22°C, and mandatory drying between layers for at least 10 minutes. An error in any of the parameters leads to drips, dull coating or paint peeling within a month.
Why Motip better than cheap analogues: 5 key advantages
Spray cans Motip cost 2–3 times more than budget paints (for example, Kudo or Abro), but the difference is justified by production technology. Firstly, the pigments in Motip crushed to 5–7 microns (versus 15–20 for cheap brands), which ensures uniform spraying without lumps. Secondly, the propellant is based isobutane (and not cheap butane) guarantees stable pressure until the last drop.
Here's what else the professionals highlight:
- 🔬 Color Accuracy: bases Motip correspond to the original manufacturers codes (e.g.
B4B4for Audi or426for BMW), while cheap paints often give a greenish or yellowish tint. - 🛡️ UV resistance: contains UV filters, preventing fading for 3–5 years (in analogues, the paint fades within a year).
- 🧪 Adhesion: special resins in the formula allow the paint to be applied even to slightly rusty surfaces (subject to pre-treatment Motip Rust Converter).
- 🎨 Assortment: more than 10,000 shades in the catalog, including rare mother-of-pearl (for example,
Xirallicfor Mercedes). - 🔄 Possibility of tinting: in some auto stores you can order a can with an individual color code based on a sample.
But even with Motip there are risks. For example, series Motip Matt requires mandatory varnishing, otherwise the paint will wear off after 2-3 washes. And the cans with the “chameleon” effect (Color Flip) are applied only in 3 layers with intermediate drying for 20 minutes - otherwise the pigments will not appear.
How to choose the exact paint color Motip by VIN or body code
An error in choosing a shade is the most common reason why a transition is visible after painting. To avoid this, never rely on visual catalog selection. Instead:
- Find color code on the vehicle's placard (usually on the door pillar or under the hood). For example, for Skoda Octavia 2020 it could be
LY7J(metallic grey). - Check the code against the database Motip on the official website or through the service ColorNdrive. Please note that one code can correspond to several shades depending on the year of manufacture.
- If the label is missing, use VIN decoder (for example, VinDecoderz) - it will show the original factory paint color.
- For rare shades (for example,
Python Greenat Lamborghini) order test can 100 ml volume - it is cheaper, but will allow you to check the match.
Important: Motip There are two color lines - standard (for mass models) and premium (for luxury cars). For example, code 992 in the standard line it corresponds to black gloss, and in the premium line it is a deep black metallic with a blue tint (BMW Individual).
| Car make | Example color code | Motip Series | Features |
|---|---|---|---|
| Toyota | 1G3 |
Dupli-Color | Requires soil Motip Plastic Primer for bumpers |
| Volkswagen | LA7W |
Premium | Apply in 2 layers with drying time 15 minutes |
| Audi | B4B4 |
Flex | Suitable for soft plastics (e.g. moldings) |
| Mercedes | 775U |
Matt | Be sure to varnish Motip Clear Matt |
⚠️ Attention: If your car has been painted previously (even at an official service station), the original color code may not match. In this case, take a can that is a shade lighter - after varnishing it will become darker.
Step-by-step instructions: how to spray paint Motip no divorces
The painting process is divided into 4 stages: preparation, priming, painting and finishing. Skipping even one step will result in paint peeling or visible transitions. Let's look at each stage in detail.
1. Surface preparation
A chip or scratch must be cleaned of dirt and rust. Use:
- 🧽 Degreaser Motip Cleaner (not acetone! it destroys plastic).
- 🧴 Antisilicone for removing polishes.
- 🔪 Scotch Brite 800-1000 grit to matt the edges.
If the chip depth is more than 0.5 mm, fill it with putty Motip Filler and sand it with sandpaper P1200.
2. Primer
For metal use acid soil Motip Etch Primer, for plastic - Motip Plastic Primer. Apply 1-2 layers from a distance of 20 cm, dry for 30 minutes. Don't skimp on primer - without it, the paint will peel off in 2-3 months.
3. Painting
Spray technique:
- 🎯 Hold the can perpendicular surfaces.
- 🔄 Start spraying outside details to avoid drips.
- ⏱️ Apply layers at intervals of 10-15 minutes (for metallics — 3 layers, for gloss — 2).
The can is shaken for 2–3 minutes|Air temperature +18...+22°C|The surface is degreased and matted|The soil is completely dry (30+ minutes)-->
4. Varnishing and polishing
To protect paint, use Motip Clear Coat (glossy) or Motip Clear Matt (matte). The varnish is applied in 1–2 layers, drying for 20 minutes. After 24 hours, polish the surface with paste Motip Polish to remove microdust.
⚠️ Attention: If painting outdoors, avoid direct sun - the paint will dry too quickly and leave streaks. Ideal conditions: shade + humidity not higher than 60%.
Top 5 mistakes when working with Motip and how to avoid them
Even experienced professionals sometimes make mistakes that spoil the result. Here are the most common:
- Spray too close (less than 15 cm) → drips and uneven layer.
Solution: Hold the can at a distance of 20–25 cm, move your hand smoothly. - Painting on wet surfaces → the paint swells.
Solution: Dry each layer of primer/paint for at least 10 minutes (for metallics - 15). - Using the wrong varnish → cloudiness or yellowness.
Solution: for Motip Matt just take it Motip Clear Matt, for gloss - Motip Clear Coat. - Painting at temperatures below +15°C → the paint does not polymerize.
Solution: Move work to a heated garage or use infrared lamp. - Apply a thick layer in one pass → the paint wrinkles.
Solution: 3 thin layers with drying are better than one thick one.
Another typical problem is shade mismatch after drying. This is due to the fact that metallics and pearls “play” depending on the lighting angle. To avoid surprises, always test the paint for unnecessary detail (for example, the inside of the trunk lid).
If paint Motip dried in the nozzle of the can, do not try to clean it with a needle - this will damage the valve. Instead, immerse the nozzle in warm water for 5 minutes, then shake the can and spray onto the unwanted surface until an even pattern is restored.
Series comparison Motip: which one to choose for your task
Motip offers 7 main series, each of which is designed for specific tasks. Below is a comparison table with recommendations for use.
| Series | Purpose | Benefits | Disadvantages | Price (400 ml) |
|---|---|---|---|---|
| Dupli-Color | Metallics and pearls | Maximum coverage, 10,000+ shades | 30–40% more expensive than analogues | ~1 200 ₽ |
| Premium | Complete painting of parts | Resistant to high pressure washing | Requires mandatory varnishing | ~1 500 ₽ |
| Flex | Plastic bumpers, moldings | Elastic formula, does not crack | Limited palette (500 shades) | ~1 300 ₽ |
| Matt | Matte parts (mirrors, grilles) | Does not require polishing | Gets dirty quickly, needs protective varnish | ~1 100 ₽ |
| Rim Paint | Discs and hubcaps | Heat resistance up to +120°C | Takes a long time to dry (48 hours) | ~900 ₽ |
For local repairs (chips, scratches) optimal Dupli-Color — it best conveys the factory shade. For complete painting of parts (for example, wings) take Premium - it retains its shine longer. And for plastic (bumpers, spoilers) suitable only Flex, since ordinary paint will crack if deformed.
How to check the authenticity of a Motip spray can?
Original Motip has:
1. Logo with a holographic sticker on the bottom of the can.
2. Serial number on the label (can be checked on the manufacturer’s website).
3. Plastic nozzle with a metal valve (counterfeits have a completely plastic nozzle).
4. The production date is indicated in the format DD/MM/YYYY (counterfeiters often have MM/DD/YY).
How to store and transport cans Motip
Improper storage can cause the paint to thicken, the nozzle to become clogged, or the can to explode when heated. Follow these rules:
- 🌡️ Temperature: store at +5…+25°C. Freezing or overheating above +50°C renders the paint unusable.
- ☀️ Light: Avoid direct sunlight - UV destroys pigments.
- 🔄 Position: the can must stand vertically (not on the side!). Otherwise, the propellant will separate from the paint.
- ⏳ Expiration date: 3 years from the date of manufacture (indicated on the bottom). Once opened, use within 6 months.
When transporting (for example, in the trunk of a car in summer), wrap the cans in a towel - this will protect them from heat. If the paint still thickens, you can thin it thinner Motip Thinner (no more than 10% of volume).
⚠️ Attention: Never throw cans into fire or heating devices - they may explode! Dispose of empty cylinders through a hazardous waste collection point.
Alternatives Motip: when to choose another brand
Although Motip - a leader in quality, in some cases it is advisable to consider analogues:
- 💰 Budget renovation: Kudo or Abro 2 times cheaper, but suitable only for temporary repairs (last 6–12 months).
- 🔧 Professional painting: Spies Hecker or PPG They provide a more durable coating, but require painting equipment.
- 🚗 Rare colors: for exclusive shades (eg Mansory or Brabus) it is better to order paint from official dealers.
- ⚡ Quick drying: Rust-Oleum dries in 20 minutes, but has a limited palette.
If you choose analogue, pay attention to mixing system. For example, Motip and Dupli-Color are compatible in terms of databases, but Kudo Requires separate varnish and primer.
Paint Motip justifies its price only if the technology is followed. If you are not ready to spend time on preparation and drying, it is better to contact a painting service - self-repair will cost more due to repainting.
FAQ: Answers to frequently asked questions about paint Motip
Is it possible to paint Motip over old paint without primer?
It is possible, but only if the old paint does not peel off and does not have a gloss. Before painting, be sure to matte the surface with Scotch Brite. P1000 and degrease. However, for durability it is recommended to apply primer - it improves adhesion by 40%.
How many layers of paint Motip need to be applied?
Depends on the type of paint:
- Glossy colors: 2 layers.
- Metallics and mother-of-pearl: 3 layers (the first is thin, “dusty”).
- Matte paints: 2–3 layers with mandatory varnishing.
Important: each layer must be thinner than the previous one!
How long after painting can I wash my car?
The minimum period is 7 days at a temperature of +20°C. If painting was carried out in a garage without airflow, increase the period to 14 days. To wash, use a non-contact method or a soft sponge with a pH-neutral shampoo (for example, Motip Car Shampoo).
Why after painting Motip is the transition visible?
There are three reasons:
- The shade is incorrectly selected (even if the code matches, the paint could have faded in the sun).
- Poor spray technique (too close or at an angle).
- Not used transition varnish (required for metallics Motip Blending Clear).
To eliminate the transition, polish the painted area with an abrasive paste. P2000.
Is it possible to mix paints? Motip different series?
No! For example, Dupli-Color and Premium have a different base: the first is acrylic, the second is acrylic-urethane. Mixing will cause the paint to curdle. If you need to get a unique shade, use tinting system Motip Mix.