Kia Kodiac is a popular family crossover, valued for its spacious interior and comfort. But even in such a car, unpleasant odors appear over time, and the performance of the stove or air conditioner deteriorates. Most often the reason lies in a clogged cabin filter. Replacing it is one of the simplest procedures that you can do yourself, saving on service costs.
In this article you will find detailed instructions on how to replace the cabin filter with Kia Kodiac (including restyled versions), tips on choosing consumables, as well as answers to frequently asked questions. We'll look at what tools you'll need, where the filter is located, and how to avoid common installation mistakes.
Where is the cabin air filter located in a Kia Kodiac?
B Kia Kodiac The cabin filter is located behind glove box on the passenger side. This is a standard location for most modern cars, but access to it may vary depending on the year of manufacture and equipment.
To get to the filter you need to:
- 🔧 Open the glove compartment and empty it of its contents.
- 🔍 Find the fasteners (usually there are two of them) on the sides of the glove compartment.
- 📍 Gently squeeze the latches and pull the glove compartment out of the grooves.
- 🔎 Behind the glove compartment you will see a plastic cover - this is the cabin filter hatch.
On restyled versions (from 2021), the glove compartment mounting may be slightly changed, but the principle remains the same. If you have Kodiac with a climate control system, the filter may be slightly larger than standard.
When should you change the cabin filter?
The manufacturer recommends replacement every 15,000 km or once a year. However, in real operating conditions (dusty roads, city smog, frequent use of air conditioning), the filter can clog much faster.
Signs that it's time to change the filter:
- 🌬️ The strength of the air flow from the deflectors has deteriorated.
- 👃 An unpleasant smell appeared when turning on the stove or air conditioner.
- 🌫️ The glass began to fog up more often.
- 🚗 The interior has become dustier, even with regular cleaning.
⚠️ Attention! If you often drive on dirt roads or in conditions of heavy gas pollution, the filter may become unusable within 8,000–10,000 km. In this case, it is better to focus not on the mileage, but on the condition of the filter.
| Operating conditions | Recommended replacement frequency |
|---|---|
| City (moderate dustiness) | 12,000–15,000 km |
| Country roads, primers | 8,000–10,000 km |
| Megacity with high levels of smog | 6,000–8,000 km |
| Passengers with allergies or asthma | Every 6 months |
Which cabin filter to choose for Kia Kodiac?
On Kia Kodiac two types of filters are installed:
- 🔄 Regular paper - cheap, but weakly protect against fine dust and allergens.
- 🌿 Coal - absorb odors and harmful gases better, but are more expensive.
Original filter from Kia/Hyundai has an article number 97133-D2000 (paper) or 97133-D2010 (coal). However, you can also use analogues from trusted brands:
| Brand | Article | Type | Average price, ₽ |
|---|---|---|---|
| Mann-Filter | CU 29003 |
Coal | 1 200–1 500 |
| Framm | CF11934 |
Paper | 600–800 |
| Bosch | 1 987 949 655 |
Coal | 1 400–1 700 |
| SCT | SAK 293 |
Paper | 400–600 |
If you or your passengers suffer from allergies, it is better to choose a carbon filter with additional antibacterial impregnation. It is more effective at trapping pollen, mold spores and other allergens.
Before purchasing, check the filter dimensions - on some versions Kodiac There may be filters with slight differences in dimensions. It's better to remove the old one and compare it with the new one.
Step-by-step instructions for replacing the cabin filter
To replace the filter, you don't need any special tools - just your hands and a little patience. The whole process will take no more than 15 minutes.
☑️ What you will need to replace
Step 1. Preparation
Park the car on a level surface and turn off the engine. Open the glove compartment and remove all items from it. If there is a light in the glove compartment, you can turn it off so that it does not interfere.
Step 2. Removing the glove compartment
Locate the plastic clips on both sides of the glove compartment. Press them at the same time and pull the glove compartment towards you. It should come out of the grooves. If the latches are tight, you can carefully pry them off with a screwdriver.
Step 3: Access the filter
Behind the glove compartment you will see a plastic lid with latches. Release the latches and remove the cover. Below it is the cabin filter housing.
Step 4: Removing the Old Filter
Gently pull the filter down by the edge - it should come out without effort. If the filter is stuck, check for additional latches on the sides. On some versions Kodiac The filter can be installed at a slight angle - do not pull it with force to avoid tearing it.
Step 5: Clean the Case
Before installing a new filter, wipe the housing from dust and debris with a rag. If dirt has accumulated inside, you can use a vacuum cleaner.
Step 6: Install a new filter
Pay attention to the arrows on the filter housing - they indicate the direction of air flow. On Kodiac the filter is installed by arrows down. Insert it all the way, then close the lid and return the glove compartment to its place.
If after replacing the filter there is still a smell in the cabin, check the air conditioner evaporator - there may be mold accumulated there.
Typical mistakes when replacing the cabin filter
Even something as simple as replacing the cabin filter can go wrong. Here are the most common mistakes:
- 🔄 Filter orientation is incorrect. If you place it with the arrows facing up, the filtration efficiency will decrease and dust will penetrate into the cabin.
- 🔧 Damage to the glove box latches. If too much force is applied, the plastic latches may break, causing the glove compartment to dangle.
- 🧹 Ignoring case cleaning. If you do not remove dirt from the compartment, the new filter will clog faster.
- 🚗 Choosing a low-quality filter. Cheap analogues may not hold their shape well and allow unpurified air to pass through.
⚠️ Attention! If your furnace or air conditioner doesn't work as well after replacing the filter, check to see if any debris has gotten into the air ducts. Sometimes, when the old filter is not carefully removed, dust particles clog the fan.
Another common problem is loose fit of the filter. If it is installed crookedly or not completely, unfiltered air will enter the cabin. Make sure the filter fits into the grooves without gaps.
How to extend the life of the cabin filter?
If you don't want to change the filter too often, follow these tips:
- 🌬️ Air the interior regularly, especially after rain or washing.
- 🚿 Once a month, turn on the air conditioner at maximum power for 10 minutes - this will help dry the system.
- 🧴 Use antibacterial sprays to treat air ducts (for example, Liqui Moly Klima-Anlagen-Reiniger).
- 🚗 Try not to park under trees during the flowering period - pollen quickly clogs the filter.
If you often drive on dusty roads, you can install prefilter - a special mesh that traps large dust particles before they reach the main filter. This will extend his life by 20–30%.
What happens if you don't change the filter?
A clogged cabin filter not only worsens air quality, but also creates additional stress on the heater fan. This can lead to premature wear. In addition, in damp weather, mold can form on the filter, which then spreads through the air ducts and becomes a source of unpleasant odors.
FAQ: Frequently asked questions about replacing the cabin filter on a Kia Kodiac
Is it possible to wash the cabin filter instead of replacing it?
It is useless to wash paper filters - they lose their shape and filtering properties. It is also not recommended to wash carbon filters, as the carbon layer will be washed out. It is better to buy a new one - its price is not commensurate with the health risk.
Which filter is better - carbon or regular?
A carbon filter removes odors more effectively and traps harmful gases, but is more expensive. If you often drive in traffic jams or on dusty roads, the coal option is preferable. For normal urban use, paper is sufficient.
Do I need to reset errors after replacing the filter?
On Kia Kodiac Replacing the cabin filter does not require resetting the service intervals via the on-board computer. However, if the clogged filter indicator on the panel is on (on some versions), it can be reset manually through the menu Settings → Maintenance → Reset filter.
Is it possible to install a filter from another car?
Theoretically, it is possible if the sizes match. However, the original filter or a certified analogue is guaranteed to fit in shape and density. Experiments with non-original consumables can lead to poor filtration or broken latches.
What should you do if the cabin smells damp after replacing the filter?
This is a sign of mold in the air conditioning system. It is recommended to treat the evaporator with a special cleaner (for example, Step Up Airco Cleaner) and dry the system by turning on the air conditioner at maximum power with the windows open for 10–15 minutes.