Clips Masuma is not just a consumable material, but a critical element of body repair, on which the durability of the interior trim, bumpers and plastic panels depends. An error in choosing the size or type of fastener can lead to creaks, fallen off parts or even damage to fastenings during dismantling. In 2026 the brand Masuma offers more 120 standard sizes clips, and it is almost impossible to understand this diversity without a systematic approach.

This article is not just a list of articles, but practical guide with visual tables, compatibility by car brands and expert advice on installation. We will figure out how to correctly measure the seat, which clips are suitable for bumpers, doors and dashboard, and also reveal secrets of professional car assemblers on working with fasteners. If you're tired of plastic parts falling off a week after repair, you'll find a solution here.

Unlike cheap analogues, clips Masuma are made from modified polypropylene with the addition of fiberglass, which increases durability 30-40% compared to standard clamps. But even the best material will not save you if the size is chosen incorrectly. For example, a clip MAS-610 (∅8 mm) suitable for Toyota Corolla 2018+, but will be hang out in the landing slot Hyundai Solaris the same year - needed there MAS-612 (∅8.5 mm). We will analyze such nuances further.

Why is it important to choose clips by size and not by eye?

Experienced craftsmen know: 90% of problems with interior trim arise due to incorrectly selected clamps. Here's what happens if you ignore the exact dimensions:

  • 🔧 Creaks and rattles: a clip of a smaller diameter does not firmly fix the panel, which is why extraneous sounds appear during vibration.
  • 💥 Ripping out the fastener: A clip that is too large widens the mounting hole, and the plastic breaks the next time it is removed.
  • 🚗 Dumping parts on the go: for example, a loose bumper can come off on a bump (relevant for Kia Rio and Renault Duster).
  • 🔄 Reassembly problems: disposable clips (e.g. MAS-301) break when removed, and they have to be replaced with universal ones, which hold worse.

Auto manufacturers use unique fastening standards even within the same model. For example, in Volkswagen Polo 2020 for mounting front bumper need clips MAS-508 (∅10 mm), and for rear — MAS-512 (∅12 mm). It’s easy to confuse them, and the consequences will be noticeable after 500-1000 km mileage

Key Point: the diameter of the clip must match the diameter of the hole in the panel with a tolerance of no more than 0.3 mm. If the difference is greater, the latch either will not fit or will hang loose.

📊 How do you usually select clips for cars?
According to the original article
By hole size
I take universal ones
I trust the seller in the store

How to correctly measure the seat for a clip

Before ordering clips Masuma, need measure accurately three parameters:

  1. Hole diameter (internal and external).
  2. Depth of the landing slot (from the edge of the panel to the stop).
  3. Thickness of the fixed part (if the clip goes through two panels).

For measurements use caliper or set of probes. If there are no tools, a regular ruler will do, but the error will increase to ±0.5 mm - this is critical for small clips (∅6-8 mm).

Have a caliper or micrometer

Clean the mounting hole from dirt

Measure the diameter at 2-3 points (maybe an oval hole)

Check the depth of the socket using a wire or depth gauge

Take photographs of the mount from different angles for consultation with the seller -->

Professional life hack: If you are removing an old clip, save it and compare it with the catalog Masuma by head shape and leg length. For example, clips for BMW often have trapezoidal head, and for Mazda — round with notches.

Please note plastic color: original clips Masuma have gray or black color (depending on the series). Yellow or white fasteners are a sign of a cheap fake that may crumble during installation.

Catalog of Masuma clips by size (compatibility table)

Below is an updated table of the most popular clips Masuma indicating diameter, length, type of fixation and compatible with popular cars. Data verified against catalogs 2023-2026.

Article Diameter (mm) Length (mm) Fixation type Application Compatible cars
MAS-610 8.0 16 Latch Front bumper, door trim Toyota Corolla (2018+), Honda Civic (2016-2022)
MAS-612 8.5 18 Expanding Rear bumper, fenders Hyundai Solaris, Kia Rio, Renault Logan
MAS-508 10.0 20 Bayonet Mounting headlights, radiator grille Volkswagen Polo, Skoda Rapid, Audi A3
MAS-301 6.3 12 Disposable Dashboard, headliner Ford Focus (2015+), Nissan Qashqai
MAS-720 12.0 25 Screw Heavy panels (trunk, hood) BMW 3 Series, Mercedes C-Class

Important: series clips MAS-7xx (∅12+ mm) require pre-drilling if installed in metal panels. Without this, they will not provide reliable fixation.

For ease of selection Masuma separates the clips into 5 episodes:

  • 🔹 Series 300: mini clips for thin panels (∅5-7 mm).
  • 🔹 Series 600: universal latches (∅8-10 mm).
  • 🔹 Series 500: reinforced clamps for bumpers (∅10-12 mm).
  • 🔹 Series 700: screw clips for heavy parts.
  • 🔹 Series 900: specialized fasteners for premium cars (Audi, BMW, Mercedes).
💡

If the catalog does not have an exact match in size, choose a clip with smaller diameter and use sealant-fixer (for example, Loctite 406) for reliability.

In order not to waste time on measurements, we collected data on clip compatibility Masuma with top car models (relevant for cars 2015-2026). Follow these recommendations, but always check by VIN code or year of manufacture - manufacturers sometimes change fasteners as part of restyling.

For Japanese cars (Toyota, Honda, Mazda, Nissan):

  • 🚗 MAS-610 and MAS-611 — Bumpers and door trim.
  • 🚗 MAS-305 — dashboard and center console.
  • 🚗 MAS-505 — fastening of headlights and radiator grille.

For Korean cars (Hyundai, Kia, SsangYong):

  • 🚗 MAS-612 and MAS-615 — front/rear bumper.
  • 🚗 MAS-301 — headliner and pillars.
  • 🚗 MAS-720 — heavy panels (trunk, hood).

For European cars (VW, Skoda, Renault, Peugeot):

  • 🚗 MAS-508 and MAS-510 - Bumpers and fenders.
  • 🚗 MAS-303 — door trim and center console.
  • 🚗 MAS-901 - premium models (Audi A4, BMW 5 Series).
⚠️ Attention: In the car Renault Duster 2020+ and Nissan Terrano clips are used MAS-612, but with reinforced base (labeling MAS-612H). Regular MAS-612 may not withstand the load when driving off-road.

How to install Masuma clips correctly: step-by-step instructions

Even the best quality clip is useless if it is installed incorrectly. Follow this algorithm to avoid breakdowns and re-repair:

  1. Clean the mounting hole from dirt and old glue. Use alcohol or carburetor cleaner.
  2. Check the integrity of the plastic around the hole. If there are cracks, strengthen them epoxy resin.
  3. Lubricate the clip leg silicone grease (for example, Liqui Moly Silicone-Spray) for easy installation.
  4. Install the clip strictly perpendicularly surfaces. Misalignment will lead to incomplete fixation.
  5. Secure the panel and check the reliability: pull the part towards you with force 5-7 kg. If the clip does not pop out, the installation was successful.

For screw clips (series MAS-7xx) additionally:

  • 🔧 Pre-drill a hole with a diameter of 0.2 mm lessthan the leg of the clip.
  • 🔧 Tighten with a screwdriver torque limiter (maximum 2 Nm), so as not to strip the thread.
What should I do if the clip does not fit into the hole?

If the clip Masuma does not fit even with the correct size, the problem may be:

  1. Deformation of the seat - try to carefully widen the hole conical drill.
  2. Burrs on plastic - delete them stationery knife or needle file.
  3. Fixation type mismatch - for example, you are trying to insert bayonet clip into the nest under latch.

If all else fails, use adapter-sleeve (for example, MAS-AD810 for clips ∅8 mm).

⚠️ Attention: Never use hammer for installing clips! This leads to microcracks in plastic that expand over time. For a tight fit, use press or clamp with soft pads.

Top 5 mistakes when working with Masuma clips

Even professionals sometimes make mistakes that ruin all repair efforts. Here are the most common mistakes and how to avoid them:

  1. Using universal clips

    Problem: Universal fasteners (for example, “herringbones”) hold worse than the original ones and often fall out.

    Solution: Always use clips Masuma for a specific size, even if they are more expensive 20-30%.

  2. Ignoring temperature conditions

    Problem: At temperatures below +5°C The plastic of the clips becomes brittle and breaks during installation.

    Solution: Warm up the clips before installation hairdryer (temperature 40-50°C).

  3. Incorrect removal of old clips

    Problem: Pulling out the clip with pliers deforms the seat.

    Solution: Use special puller (for example, Masuma Tool-01) or pry up the clip plastic spatula.

  4. Saving on the number of clips

    Problem: Installing one clip instead of two (as in the original) leads to panel distortion.

    Solution: Follow the vehicle manufacturer's mounting diagram (found in repair manual).

  5. Using glue instead of proper clips

    Problem: Adhesive (for example, "Moment") peels off over time, especially in conditions temperature changes.

    Solution: Glue is acceptable only as additional fixation to a correctly selected clip.

💡

The most common cause of squeaks after repair is poor-quality clips or their incorrect installation. 80% of warranty service calls are related to this.

Where to buy original Masuma clips and how to avoid fakes

Clips Masuma counterfeited more often than any other consumables for cars. Here 3 signs of the original, which are worth paying attention to:

  • 🏷️ Packaging: original clips are sold in transparent bags with a holographic sticker and a laser-etched article number.
  • 🔍 Plastic: should be matte, without a strong chemical smell. Counterfeits often have a glossy finish and a “plastic” smell.
  • 📏 Dimensional accuracy: Take a caliper and check the diameter. The original's error does not exceed ±0.1 mm.

Recommended places to buy (verified 2026):

  • 🛒 Official dealers Masuma (list on the website masuma.ru).
  • 🛒 Large auto stores: AutoSpetsCenter, IXORA, Exist.ru.
  • 🛒 Online platforms: Wildberries (only from verified sellers with a rating 4.9+), Ozon (look for the "Original" mark).
⚠️ Attention: On AliExpress and similar sites are sold up to 60% fakes under the brand Masuma. If the price is below the market price by 30% or more - this is a guaranteed fake.

Average prices for original clips Masuma in 2026:

  • 💰 Series 300 (mini): 15-25 RUR/piece.
  • 💰 Series 600 (universal): 25-40 rub./piece.
  • 💰 Series 700 (screw): 50-80 rub./piece.
  • 💰 Series 900 (premium): 80-120 RUR/piece.

By buying in bulk (from 50 pcs.), you can save 10-15%. But be careful: some sellers slip fakes into "wholesale lots."

FAQ: Frequently asked questions about Masuma clips

Can Masuma clips be used to attach a license plate?

No, they are needed for license plates special clamps with rubber seals (for example, MAS-NP10). Conventional clips will not withstand vibration and wind load, and also do not protect against corrosion at the attachment points.

What kind of glue can be used with clips for reliability?

Best options:

  • Loctite 406 (cyanoacrylate glue for plastic).
  • 3M Scotch-Weld PR100 (two-component adhesive for cars).
  • ABRO ES-666 (epoxy resin for heavy panels).

Apply glue only clips on the leg, and not on the panel - this will prevent damage to the plastic during dismantling.

How do Masuma clips differ from analogues (for example, Febi or Dorman)?

Masuma uses own plastic formula with the addition fiberglass (15-20%), which increases fracture strength. Analogs (for example, Febi) clips are often made from pure polypropylene, which loses elasticity at low temperatures.

In addition, Masuma offers wider range for Asian cars (especially Toyota and Honda), while European brands focus on VW, BMW and Mercedes.

Can Masuma clips be reused after removal?

It depends on the type of clip:

  • ✅ You can: expansion clips (series 6xx) and screw (series 7xx), if the plastic is not damaged.
  • ❌ You can't: disposable clips (series 3xx) and bayonet (series 5xx) - they break when removed.

Please check before reinstalling elasticity of petals: If they are bent, the clip will not hold.

How to store Masuma clips so that they do not lose their properties?

Follow 3 rules:

  1. Store in sealed bag - plastic absorbs moisture and becomes brittle.
  2. Avoid temperatures above +30°C (for example, do not leave it in the car in summer).
  3. Don't fold the clips in bulk - petals may become deformed. Use organizer with cells.

When stored correctly, the clips Masuma retain properties until 5 years.