The modern Hotpoint Ariston dishwasher is a complex device that can cope with any pollution, from delicate crystal to burnt baubles. However, in order for the equipment to work effectively and not spoil the dishes, you need to know exactly the capabilities of the selected program. Many owners use only one standard setting, without even knowing that phony They can save up to 30% of electricity.
In this article, we will take a closer look at what programs are available on your device, how to interpret the display on the control panel correctly, and why it is important to follow the boot sequence. Understanding the principles of work smart-sensor This will allow you to extend the life of the heating element and the circulating pump.
Incorrectly chosen wash cycle often causes white plaque on the glass or food residues on the plates. We will look at the typical operating errors and explain in which cases it is worth using. half-loadIt is not available in all models, but is critical to saving resources.
Basic washing programs and their purpose
The basis of the functionality of any dishwasher Hotpoint Ariston are basic programs designed for daily use. These are usually 1, 2 and 3 modes that cover 90% of all household tasks. Intensive washing at a temperature of 70 ° C is intended for highly contaminated kitchen utensils: pots, baking forms and pans with burnt fat.
For everyday dishes such as plates, cups and cutlery after lunch, perfect. automatic Or the Eco 50 program. In this cycle, the machine itself determines the degree of water pollution and adjusts the cycle time. This is the most energy-efficient option, although it takes longer than standard programs.
If you plan to wash glasses, crystal or fine porcelain, you need to switch to a delicate cycle. Here the water temperature does not exceed 40-45 ° C, and the pressure of the jets is reduced to avoid damage to fragile surfaces. The use of aggressive programs for such items can lead to their clouding or chipping.
⚠️ Warning: Never load wood, aluminum or tin products into the dishwasher for intensive programs – high temperature and alkaline products can irrevocably spoil their appearance.
Choosing the right starting program is the first step to a quality result. Do not try to wash the fatty pan on a quick 30-minute program, as the water simply does not have time to dissolve the contamination.
Special features and additional options
In addition to the main cycles, the Hotpoint Ariston control panels are equipped with buttons for additional functions that modify the operation of the basic program. One of the most useful options is Half Load (half-loading). It allows you to start the car even if the baskets are not fully filled, which saves water and electricity.
Function Auto Start Or a delayed start makes it possible to program the start of the washing for the night, when electricity rates are lower, or when you come from work. This is especially true for owners of counters with differentiated pay.
Regime. Extra Dry or enhanced drying activates additional warming at the end of the cycle, which ensures complete drying of plastic dishes, which usually dries worse than ceramics. There is also a frequent option. SanitizeThis increases the temperature of the last rinse to kill 99.9% of bacteria.
- 🌡️ Temperature control - allows you to manually adjust the water heating in the selected cycle.
- ⏱️ Vario Time - function of reducing washing time by increasing water consumption and pump capacity.
- 🔇 Silence - quiet operation mode, reducing the noise level of the engine and pump.
Combining basic programs with these options gives you flexibility in managing the process. However, it is worth remembering that the simultaneous inclusion of all functions can lead to an increase in the total cycle time.
Table of temperatures and cycle duration
Understanding the parameters of each mode helps to optimize resource consumption. Below is a reference table typical of most Hotpoint Ariston models. The exact values may vary slightly depending on the series of devices.
| Regime. | Temperature (°C) | Duration (min) | Type of dishes |
|---|---|---|---|
| Eko 50 | 50 | 195-240 | Medium pollution |
| Intensive 70 | 70 | 120-150 | Severe pollution |
| Delicate 40 | 40-45 | 90-110 | Crystal, glass |
| Fast 30. | 45 | 30 | Fresh pollution |
| Soaking | Cold. | 10-15 | Pre-treatment |
As you can see from the table, the Eko 50 It is the longest, but it is certified as the most economical. Short cycles consume more water and electricity per unit of time, but they benefit in speed.
Why is Eko's cycle so long?
The main time in Eco mode is spent on soaking and repeatedly filtration of a small volume of water. This allows you to achieve high purity with minimal electricity consumption for heating.
Use the soaking mode if you have accumulated dishes during the day but are not ready to run a full wash. The machine will periodically pass water, preventing the food residues from drying out.
Automatic programs and sensors of purity
Modern Hotpoint Ariston models, such as the series LTF or LFOThey are equipped with an intelligent management system. Water turbidity sensors (Turbidity Sensor) analyse the degree of contamination of the fluid to be discharged and automatically adjust the course of the programme.
If the water remains dirty after several rinsing cycles, the processor will extend the washing time or raise the temperature. Conversely, with rapid water purification, the cycle can be shortened. This eliminates the human factor and guarantees the result without your intervention.
But automation is not all-powerful. If you put very greasy dishes in the car but choose a delicate mode, the sensors may not be able to cope, as the program is physically limited in temperature. In such cases, it is better to manually choose a more powerful cycle.
⚠️ For the correct operation of the sensors do not use tablets "all in 1" with already built-in rinse, if the machine settings activated dispenser rinse - this can lead to incorrect readings of the foam sensors.
Trust automation 80% of the time, but for specific contaminants (fat, protein) it is better to choose specialized manual programs.
Decoding of the indication and error codes
The control panel reports the status of work through flashing indicators. For example, a flashing drop usually means a lack of salt, and a flashing star - the need to add to the rinse. Ignoring these signals can lead to scale on the TEN or divorce on dishes.
In the event of a malfunction, the machine will issue an error code, often in the form of flashing program indicators. For example, flashing indicators "1" and "3" may indicate a problem with water collection, and "2" and "4" may indicate a drain error. The exact decoding should always be looked for in the instructions for a particular model.
- 💧 Salt indicator It ignites when the level of regenerating salt in the tank is critically low.
- ✨ Wash indicator - signals the need for refueling.
- 🚫 Leak protection Blinking of a special icon blocks the water supply when moisture is detected in the pallet.
Regularly checking these indicators helps prevent serious breakdowns. If the indicator is constantly on and not flashing, it often indicates a technical fault requiring a wizard to be called.
Care and maintenance advice for regimes
In order for all the described modes to work as new, it is necessary to regularly maintain the filter system. A clogged filter disrupts water circulation, which is why even the most powerful mode is used. Intensive They will not be able to clean the dishes properly.
Once a month, it is recommended to start the idle cycle using a special cleaner for dishwashers at a temperature not lower than 65 ° C. This will remove fatty plaque from the internal canals and pump that is not visible to the eye but impairs the cleaning properties.
☑️ Monthly maintenance
It is also important to monitor the condition of the sprinklers. If the holes in the snags are filled with pits or plaque, the water will not be supplied at the right angle, and the efficiency of the wash will fall. The holes are easily cleaned with a toothpick.
Periodically wipe the turbidity sensor (located at the bottom of the camera) with a soft wet cloth so that the plaque does not distort its readings.
Can I wash my pans in the Hotpoint Ariston dishwasher?
Teflon products are often recommended to be washed by hand, as aggressive chemicals and high temperatures can shorten the life of the coating. However, if the manufacturer of dishes allows machine washing, use only delicate modes with temperatures up to 50 ° C.
What if after the regime "Eco" dishes remained wet?
Eco mode involves drying at lower temperatures to save energy. To improve the result, open the car door immediately after the cycle is over or use the function. Extra DryIf it is available in your model.
Why does the machine not start after selecting the program?
Most often the reason is an open door or lack of water supply. Also check if the child protection feature (usually indicated by a key) is activated, which blocks the control panel.