Car mats Kamatto 3D TPE They have long ceased to be just an accessory - they have become a mandatory element of protecting the interior from dirt, moisture and mechanical damage. Unlike traditional rubber or textile options, these mats combine the flexibility of thermoplastic elastomer (TPE) with a 3D 3D structure that holds liquids and debris securely. But how not to make a mistake when choosing among dozens of models? And why exactly Kamatto often recommended by experienced car owners?
In this article, we will figure out how 3D TPE mats differ from analogues, how to choose them correctly for a specific car model (including rare modifications), and also reveal the secrets of installation and care that will extend their service life by 2-3 times. We will pay special attention to typical installation errors - for example, why even perfectly sized mats can “ride” around the cabin, and how to fix this without purchasing additional fasteners.
What are 3D TPE mats and why Kamatto?
Term 3D TPE denotes not just a material, but an entire technology for the production of rugs. Unlike flat rubber or fleecy textile options, these products have:
- 🔹 Volume sides 2–5 cm high, which form a “bath” for collecting liquids and dirt.
- 🔹 Thermoplastic elastomer (TPE) - a material that combines the elasticity of rubber and the strength of plastic, which does not crack in the cold and does not melt in the heat.
- 🔹 Anti-slip coating on the reverse side, which prevents the mats from moving while driving.
- 🔹 Environmental friendliness: TPE does not contain toxic plasticizers (unlike cheap PVC) and does not have a strong chemical odor.
Brand Kamatto stands out among competitors (WeatherTech, 3D MAXpider, TeslaMat) thanks to:
- 📏 Exact fit for 95% of car models (including rare modifications like Toyota Land Cruiser 300 or Mercedes EQS).
- 💧 Unique system of drainage channels, which divert water to the edges of the mat, preventing it from accumulating under your feet.
- 🔄 3 year warranty (most competitors have 1–2 years).
However, there are also nuances: for example, rugs Kamatto for electric cars (Tesla Model 3/Y, Hyundai Ioniq 5) have special cutouts for the brake pedal with pressure sensors - this is important to consider when choosing.
How to choose Kamatto 3D TPE mats: step-by-step guide
A mistake in choosing a size or model can cost not only money, but also safety: incorrectly selected mats can block the pedals or interfere with the operation of the system ESP. Follow this algorithm:
- Determine the exact model and year of manufacture of the car. For example, Volkswagen Golf 7 2015 and 2018 may have different floor mat mounts due to restyle.
- Check the package. Some models Kamatto come with an additional mat for the trunk or running boards (relevant for crossovers).
- Choose a color. Classic black is universal, but for light interiors (Mercedes S-Class, Audi A8) it is better to take gray or beige to avoid visual contrast.
- Check availability of fasteners. For cars with factory clips (for example, BMW 5 Series G30) you need a kit with holes for the original clamps.
Pay special attention side height:
- 🚗 For sedans (for example, Toyota Camry) 2-3 cm sides are enough.
- 🏔️ For SUVs (Land Rover Defender, Nissan Patrol) take models with sides of 4–5 cm - they hold dirt better after off-roading.
- ⚡ For electric cars (Tesla Model Y, Kia EV6) choose mats with cutouts for charging wires.
Check the VIN code of the car with the compatibility table on the Kamatto website |
Make sure the front and rear seat mats are included|
Check reviews for a specific model (especially smell and hardness of the material)|
Find out if additional clips are needed for fixation-->
Comparison of Kamatto 3D TPE with other types of mats
To understand whether it is worth overpaying for Kamatto, let's compare them with their main competitors:
| Parameter | Kamatto 3D TPE | Rubber flat | Textile (pile) | WeatherTech (TPO) |
|---|---|---|---|---|
| Moisture protection | ⭐⭐⭐⭐⭐ (sides 3–5 cm) | ⭐⭐ (sides up to 1 cm) | ⭐ (absorb water) | ⭐⭐⭐⭐ (sides 2–3 cm) |
| Frost resistance | up to -40°C (do not crack) | down to -25°C (may tan) | down to -10°C (mold during thawing) | up to -30°C |
| Service life | 5–7 years | 2–3 years | 1–2 years | 4–6 years |
| Price (set) | from 8,000 to 25,000 ₽ | from 1,500 to 5,000 ₽ | from 3,000 to 10,000 ₽ | from 12,000 to 30,000 ₽ |
| Features | Drainage channels, environmentally friendly TPE | Cheap, but slip | Requires frequent washing | Hard material, noisy |
Critical nuance: Kamatto mats for cars with heated seats (for example, Volkswagen Tiguan) have special perforations that prevent overheating of the TPE material. With cheap analogues this can lead to deformation.
⚠️ Attention: If your car has a system CarPlay/Android Auto with touch buttons under the steering wheel (as in Mazda CX-5), make sure the mat does not block the infrared sensors - this may disable media controls.
Step-by-step instructions for installing Kamatto 3D TPE
Incorrect installation is the main reason why floor mats “ride” around the cabin or interfere with the pedals. Follow this instruction:
- Clean the interior. Remove old rugs, vacuum the floor and wipe it with a damp cloth and car shampoo (for example, Sonax Xtreme). Residues of sand or dirt may scratch the back of new rugs.
- Check the fastenings. In most cars (for example, Skoda Octavia, Ford Kuga) there are factory clips - they need to be aligned with the holes on the mats Kamatto. If there are no clips, use double-sided tape 3M VHB (but not ordinary stationery!).
- Install the front floor mats. Start with the driver's side - it should fit snugly against the pedals, but not overlap them. To check, press the gas pedal all the way: the mat should not move.
- Attach the rear floor mats. In crossovers (Toyota RAV4, Hyundai Tucson) the rear mat is often in two pieces - make sure the seam does not hit the seat rails.
- Check drainage. Pour 100 ml of water onto the mat - it should flow towards the edges and not accumulate in the center.
For cars with electronic parking brake (for example, BMW X5, Audi Q7) it is important that the mat does not overlap the button Auto Hold - otherwise the system may not work correctly.
If the rugs are a little large, do not cut them with a knife - this will ruin the tightness of the sides. Instead, heat the TPE with a hairdryer (temperature 60-70°C) and carefully bend the excess edges. Once cooled, they will retain their new shape.
Caring for Kamatto 3D TPE: how to wash and store
One of the key advantages of TPE mats is ease of maintenance. However, there are rules that will prolong their life:
- 🧼 Washing: Use warm water (up to 40°C) and a mild detergent (e.g. Meguiar’s All Purpose Cleaner). Prohibited Brushes with hard bristles and abrasive powders - they scratch the surface.
- 🌡️ Drying: Do not dry in direct sunlight or near a radiator. Optimally - in the shade at room temperature. You can use a fan to speed up the process.
- 🧴 Material care: Once every 3 months, treat the mats with silicone lubricant (for example, WD-40 Specialist) - this will prevent the TPE from cracking.
- ❄️ Winter care: After traveling through slush, rinse the mats with water and vinegar (1 tablespoon per 1 liter) - this will remove salt and reagents that corrode the material.
To remove stubborn stains (such as oil or coffee), use plastic cleaning spray (Sonax Plastic Cleaner). Apply it for 5-10 minutes, then rinse with water. Do not use solvents (acetone, white spirit) - they destroy TPE!
⚠️ Attention: If the mats begin to stick to the shoes, this is a sign of using a low-quality detergent. Rinse them with water and citric acid (20 g per 1 l) and dry.
What to do if the rugs are deformed?
If after a long period of heat (for example, in a car under the sun) the mats have lost their shape, place them under a load (for example, a stack of books) for 12–24 hours. TPE will return to its original state. If the deformation is severe (the sides have collapsed), heat them with a hairdryer (temperature 70–80°C) and shape them manually.
Typical problems and how to avoid them
Even with premium rugs Kamatto problems may arise. Let's look at the most common ones:
- The rugs move when you move.
Reason: Incorrect installation or lack of fixation. Solution: Use clips or double-sided tape 3M 4010 (withstands up to 10 kg per cm²). For cars without factory fastenings (for example, Renault Duster) silicone anti-slip pads are suitable.
- A smell appears.
Reason: Accumulated moisture under the rug or poor quality washing. Solution: Remove the mats, dry the interior (you can use ozonator), and wash the rugs with antibacterial agent (OdorKlenz).
- Cracks on the sides.
Reason: Exposure to aggressive reagents or frost below -30°C. Solution: Treat cracks liquid rubber (Plasti Dip) or replace the mats (warranty Kamatto does not cover mechanical damage).
- Noise when driving.
Reason: The mats rub against the plastic elements of the interior. Solution: Apply to the back of the rugs anti-squeak spray (CRC 2-26) or place thin felt.
For cars with control panel on the floor (for example, Tesla Model S, Lucid Air) it is important that the mat does not overlap the sensors. In such cases, choose models Kamatto Tesla Custom Fit with cutouts for electronic components.
If the indicator lights up after installing the mats ESP/ABS on the dashboard, immediately check to see if they are blocking the wheel speed sensors (located under the front seats).
Where to buy original Kamatto 3D TPE and how not to run into a fake
The market is flooded with cheap fakes under the brand Kamatto, which differ:
- 🔍 Smell: The original smells neutral, the fakes have a strong chemical smell (the smell of styrene).
- 📏 Pattern accuracy: Counterfeits often have crooked cutouts for pedals or gearshift levers.
- 💰 Price: Original rugs for Toyota Highlander cost ~12,000 ₽, fakes - 4,000–6,000 ₽.
Buy only from authorized dealers:
- 🛒 Official website kamatto.ru (delivery 3–5 days).
- 🛒 Wildberries/Ozon - only from sellers with a rating of 4.9+ and the “Official Partner” mark.
- 🛒 Car showrooms (for example, from official dealers Kia or Hyundai there are often branded rugs Kamatto in the catalog).
Before purchasing please check:
- Availability holograms on the packaging (in the original it changes color when tilted).
- Article — it must match the table on the website Kamatto for your car model.
- Warranty card with stamp and date of sale.
⚠️ Attention: On AliExpress and similar sites, “replicas” of Kamatto are sold at a price of 2,000–3,000 rubles. They are visually similar, but are made of cheap PVC, which cracks after 3-6 months.
FAQ: Frequently asked questions about Kamatto 3D TPE mats
Is it possible to use Kamatto 3D TPE in a car with heated floors (for example, Mercedes S-Class)?
Yes, but you need to choose a model with perforation (series Kamatto Premium Vent). It prevents overheating of the material. The maximum temperature that TPE can withstand is 80°C, and underfloor heating rarely exceeds 40°C.
How often should you wash the floor mats if you drive daily?
During active use (for example, in rainy autumn) - once every 1–2 weeks. It is enough to wash them with water and car shampoo. Carry out deep cleaning with antibacterial agents once every 3 months.
Are Kamatto floor mats suitable for right-hand drive cars (for example, Japanese imported cars)?
Yes, but you need to specify when ordering. In the catalog Kamatto there is a special note RHD (Right Hand Drive) for such cars. For example, for Toyota Alphard The article number is suitable for right-hand drive KT-ALP-RHD-2020.
Can Kamatto 3D TPE be placed on top of standard textile mats?
Not recommended. This will increase the height of the floor, which may interfere with the operation of the pedals. In addition, moisture will accumulate between the rugs, which will lead to mold. It is better to remove the standard floor mats or use Kamatto as the main ones.
What to do if the rug is torn?
Small cracks (up to 2 cm) can be repaired liquid rubber (Plasti Dip) or glue for TPE (Loctite 406). If the damage is serious (for example, the side has come off), contact service Kamatto — some models are subject to repair under warranty.