A jack is a mandatory attribute of any car, but transporting it to MaY SaMMeR CaR (or any other compact hatchback) often turns into a headache. Incorrect fastening threatens not only scratches on the trunk, but also accident under sudden braking: a 5-kilogram metal jack flying around the cabin at a speed of 80 km/h becomes a dangerous projectile. In this article we will analyze legal and safe ways fixing the jack, taking into account the design features MaY SaMMeR CaR - from standard mounts to homemade solutions.

The main problem of the owners MaY SaMMeR CaR — lack of a factory jack compartment in the trunk (unlike sedans or crossovers). Here, every centimeter of space counts, and standard seat belts often do not fit properly. We tested 7 methods - from budget (using improvised means) to professional (special mounts and cases) - so that you can choose the best option for your needs.

Important: the rules for transporting goods in passenger cars are regulated Traffic rules (clause 23.3) — the jack is considered a load, and failure to comply with it may result in a fine of up to 500 rubles. But the main thing is not fines, but your safety: according to traffic police statistics, 12% of accidents with injuries in 2023 occurred due to non-compliance with cargo transportation rules.

1. Standard mounts MaY SaMMeR CaR: where to look and how to use

Many owners do not even suspect that MaY SaMMeR CaR Hidden jack mountings are provided. They are hidden under the plastic trim of the trunk - to find them you need to:

  1. Open the trunk and remove the carpet (held on with Velcro).
  2. Lift the plastic panel to the left of the spare tire niche - there are two metal hooks there.
  3. Use the original belts with carabiners (included with the machine) to secure the jack.

If there are no belts, they can be ordered by catalog number MS-ACC-0045 (cost ~800 rubles). These mounts are designed to hold up to 15 kg, which is more than enough to cover the weight of most diamond or bottle jacks.

💡

Before buying belts, check the diameter of the hooks - in some modifications MaY SaMMeR CaR (2020–2022) they are thinner than standard (6 mm instead of 8 mm).

The advantage of this method is full compliance with traffic police requirements, since the fastenings are certified by the manufacturer. However, there are also disadvantages:

  • ⚠️ Hooks may be bent or damaged during previous use.
  • ⚠️ Belts are often lost when buying a used car.
  • ⚠️ The jack is inconvenient to take out - you have to remove the trim every time.

2. Alternative places for the jack: where to hide it so it doesn’t interfere

If the standard mountings are missing or inconvenient, consider 5 alternative locations for placing the jack in MaY SaMMeR CaR:

Place Pros Cons Suitable for jacks
Under the driver's seat Does not take up space in the trunk, quick access Only for compact models (weight up to 3 kg) Scissor jacks, mini jacks
In the niche for the spare wheel Reliable fixation due to the sides of the niche May scratch body paint Diamond, bottle
Behind the back of the rear seat Not visible from the cabin, does not interfere with cargo Difficult to secure, risk of falling when opening trunk Only with case
In the door pocket (passenger door) Instant access, doesn't take up trunk space Only suitable for jacks weighing up to 1.5 kg Mini jacks Kraft or Airline
On the roof (in the trunk box) Doesn't take up space in the cabin Requires additional fastenings, impairs aerodynamics Any, but need moisture protection

Important nuance: if you choose a place under the seat, check whether the jack is blocking the seat height adjustment mechanism (in MaY SaMMeR CaR 2021+ it is electric and located on the left).

The safest place is the niche for the spare tire, but there is a risk of damaging the paintwork. To avoid scratches, use:

  • 🧴 Silicone linings for metal parts of the jack.
  • 🧵 Fabric cover (for example, from CarPoint for 500 rubles).
  • 📦 Foam inserts cut to fit the shape of a niche.
📊 Where do you store the jack in your car?
In the trunk without fastenings
In the niche for the spare wheel
Under the seat
In the door pocket
Another place

3. Homemade fastenings: how to make a reliable fixation in 20 minutes

If you don’t want to spend money on original accessories, you can make a jack mount yourself. Options:

Method 1: Belts with carabiners (budget ~300 rubles)

Buy from a hardware store:

  • 🔗 2 belts with carabiners (length 50 cm, width 25 mm).
  • 🔧 4 metal rings (diameter 8 mm).
  • 🔨 Drill and drill bits for metal (3 mm).

Instructions:

  1. Drill 4 holes in the trunk in the corners of the niche for the spare tire.
  2. Secure the rings with bolts and nuts (use washers for security).
  3. Pass the straps through the rings and secure the jack crosswise.

Check the thickness of the trunk metal (should be ≥1.5 mm)|Use stainless bolts to avoid corrosion|Cover the sharp edges of the holes with electrical tape|Check the tension of the belts after 100 km of run-->

Method 2: Plastic box with Velcro

Suitable for jacks weighing up to 5 kg. Buy a plastic box (for example, Really Useful Box 14L) and:

  1. Glue Velcro strips (5 cm wide) to the bottom of the box.
  2. Apply the second piece of Velcro to the bottom of the trunk.
  3. Secure the jack inside the box with foam or foam rubber.

Advantage: the box can be quickly removed if the entire trunk is needed. The disadvantage is that Velcro loses its stickiness over time, especially with temperature changes.

How to strengthen Velcro?

Use double-sided tape 3M VHB (withstands up to 10 kg per 1 cm²) or additionally secure the box with rubber bands to the trunk hooks.

4. Purchased accessories: what to choose for MaY SaMMeR CaR

If you don’t want to bother with homemade products, pay attention to ready-made solutions:

  1. Trunk organizer cover (for example, Heyner 600100):
    • 💰 Price: ~1,200 rubles.
    • ✅ Suitable for jacks up to 7 kg.
    • ✅ Has pockets for tools.
  2. Magnetic holders (for example, Kraft KT-80004):
    • 💰 Price: ~600 rubles per set.
    • ✅ Attached to metal parts of the body.
    • ⚠️ Not suitable for aluminum jacks.
  • Ratchet Straps (for example, Thule Straps):
    • 💰 Price: ~1,500 rubles.
    • ✅ Tension can be adjusted with one hand.
    • ✅ Can withstand up to 20 kg.

    When choosing, pay attention to fastening material:

    • 🔹 Nylon belts will last longer, but can stretch.
    • 🔹 Polyester does not stretch, but is afraid of UV rays.
    • 🔹 Metal carbines must be made of stainless steel (marking AISI 304).
    💡

    The most versatile option for MaY SaMMeR CaR — organizer case. It not only secures the jack, but also allows you to store a wheel wrench, a safety vest and a first aid kit with it.

    5. Mistakes that 90% of owners make MaY SaMMeR CaR

    Even experienced drivers often violate the rules for transporting a jack. Here TOP-5 errorswhich can lead to a fine or an accident:

    1. Storing a jack without a cover:

      Metal parts scratch the plastic of the trunk and the paint of the body. B MaY SaMMeR CaR this is especially true due to the thin paint coating (layer thickness is only 90 microns).

    2. Using unsuitable belts:

      Luggage straps are not designed to withstand dynamic loads. In the event of an accident, they may tear, and the jack will become a dangerous projectile.

    3. Attaching the jack to plastic parts:

      B MaY SaMMeR CaR The plastic trunk panels cannot support the weight of the jack. Attach only to metal elements!

    4. Ignoring alignment:

      The jack should be as close as possible to the axis of symmetry of the car. If placed on the side, it may move when turning.

    5. Failure to check fasteners:

      Belts and carabiners should be checked every 5,000 km. B MaY SaMMeR CaR Vibrations from the 1.4 TSI engine loosen the mounts over time.

    ⚠️ Attention: If you carry the jack in the passenger compartment (for example, behind the back of the rear seat), be sure to turn off the passenger airbag. In the event of an accident, the jack may cause it to fail or, conversely, cause a false alarm.

    According to Traffic rules of the Russian Federation (clause 23.3), transportation of goods (including a jack) in a passenger car must ensure:

    • 📜 Traffic safety — the jack must not interfere with control or visibility.
    • 📜 Cargo integrity - it should not fall out or move.
    • 📜 No damage to the car — scratches or dents may cause an insurance claim to be denied.

    Penalties for violation:

    • 🚔 500 rubles - if the jack is not secured (Article 12.21 of the Administrative Code).
    • 🚔 1,000–1,500 rubles - if the jack blocks the driver’s view (Article 12.5 of the Administrative Code).
    • 🚔 Deprivation of rights for 4-6 months - if due to non-compliance with transportation rules, an accident occurred with victims.

    In 2023, the requirements for the transportation of tools were tightened: now the traffic police inspector may require you to present a jack to check its fastening. If there is no jack at all, this is equivalent to the absence of a first aid kit - a fine of 500 rubles.

    ⚠️ Attention: in MaY SaMMeR CaR With factory tinted windows, the inspector does not have the right to demand that the trunk be opened to check the jack fastening. However, if there is no tint, refusal to check may be regarded as concealing a violation.

    7. Tips for different types of jacks

    Depending on the jack model, the methods for attaching it to MaY SaMMeR CaR differ:

    Jack type Recommended place Mounting method Additional accessories
    Diamond-shaped Niche for spare wheel Belts + foam inserts Case CarPoint CP-005
    Bottle (hydraulic) Rear trunk Magnetic holders + straps Anti-corrosion lubricant WD-40
    Scissor Under the seat or in the door pocket Velcro or rubber bands Plastic box Really Useful Box
    Pneumatic Trunk (vertical) Special bracket Compressor Beru Tire Inflator

    For bottle jacks, it is especially important to ensure tightness - in MaY SaMMeR CaR The trunk is not sealed, and if it rains, moisture can get into the hydraulic system. Solution: Wrap the jack in a vacuum bag or use silica gel (dehumidifier bags).

    If you have a pneumatic jack, remember: it cannot be stored at temperatures below -10°C - the rubber seals lose elasticity. B MaY SaMMeR CaR This problem is encountered in winter when the car spends the night outside. Solution: Move the jack to a warm place or use a thermal cover.

    FAQ: Frequently asked questions about transporting a jack to MaY SaMMeR CaR

    Is it possible to transport a jack in the back seat?

    Technically it is possible, but this violates clause 22.8 of the traffic rules if the jack is not secured. In addition, in MaY SaMMeR CaR The rear seat has thin upholstery - a metal jack can break through it in an accident. If you still decide to carry it this way, use a cover and seat belts to secure it.

    Which jack is best for MaY SaMMeR CaR?

    The best option is diamond jack with a lifting capacity of 2 tons (for example, Kraft KT-80003). It is compact (folded height - 15 cm), lightweight (3.2 kg) and suitable for most modifications MaY SaMMeR CaR (including versions with low-profile tires). Bottle jacks take up more space, and scissor jacks do not always provide the required lifting height.

    What to do if there is no room for a jack in the trunk?

    In this case, consider the following options:

    1. Install roof rack (for example, Thule WingBar Evo) and use a waterproof box.
    2. Transfer some of the tools to engine compartment (if you have a modification without a spare wheel).
    3. Use multifunctional jack-first aid kit (for example, Airline AJ-R-03), which takes up minimal space.

    As a last resort, you can leave the jack at home, but then be sure to take it with you tire repair kit (harnesses, sealant) and pump.

    How to protect the trunk from scratches?

    Proven methods:

    • 🛡️ Use rubber mat with sides (for example, WeatherTech for MaY SaMMeR CaR).
    • 🛡️ Stick it transparent protective film to the bottom of the trunk (cost ~1,500 rubles).
    • 🛡️ Wrap the jack in bubble wrap or foam rubber.

    If scratches have already appeared, they can be removed by polishing with paste. 3M Rubbing Compound (for minor damage) or local spray painting (for deep damage).

    Is it necessary to register the jack with the traffic police as a transported cargo?

    No, the jack does not require registration, since its weight does not exceed 20 kg (the threshold for mandatory registration of cargo in a passenger car). However, if you are transporting professional equipment (for example, a hydraulic jack weighing 15+ kg), a dangerous goods permit may be required (if the jack contains oils or gases under pressure).