Virtual garage games Car Mechanic Simulator 2018 opens the door for the player to a world of detailed mechanics, where every bolt matters. Beginners often encounter difficulties when first getting acquainted with the procedure for removing the power unit, since the interface and logic of actions require care. To successfully complete this task, you must clearly understand the sequence of operations and be able to distinguish the main components of the car.
Dismantling process engine is a fundamental skill, without which it is impossible to fully repair or tune a vehicle in the simulator. Mistakes at this stage can result in important parts remaining in the car and the customer not receiving their car back on time. Proper preparation of the workplace and availability of the necessary tools is the first step to success in any workshop.
In this guide, we will analyze in detail each stage of engine removal, paying special attention to hidden elements and the nuances of working with various car systems. You'll learn how to avoid common mistakes and optimize the time you spend serving customers. Deep understanding of design V8 or R4 engines will allow you to confidently take on the most complex orders.
Workplace preparation and diagnostics
Before you begin to actively unscrew the bolts, it is necessary to carry out a thorough diagnostics car. In gameplay, this is not just a formality, but a way to determine which parts require replacement or repair, which directly affects profits. Use a tablet or computer in the office to receive orders and conduct initial inspections to create a work plan.
Place your vehicle on a lift and make sure you have access to all necessary areas of the engine compartment. Often, newbies forget to remove attachments or disconnect fuel lines, which blocks further dismantling. A careful inspection reveals hidden damage such as cracks in the cylinder block or wear pistons.
⚠️ Warning: Do not attempt to remove the engine without checking the oil level and coolant condition. In a simulator this may not block the action, but in real mechanics and for full immersion it is a critical preparation step.
To work effectively, you will need a set of wrenches and sockets, which can be purchased at a tool store. Having quality tools speeds up the process of unscrewing rusty or overtightened connections. B CMS 2018 The quality of the tool affects the speed of the action, so it is worth investing in the best equipment.
Dismantling of attachments and systems
The first step in the process of removing the powertrain is to clear the space around it. You will need to remove all parts that physically connect the engine to the body or other vehicle systems. Start with the air filter and intake manifold, as they often block access to the upper mounting bolts.
- 🔧 Remove the battery and disconnect all electrical connectors leading to the engine and generator.
- 💧 Disconnect the cooling system hoses, first making sure that the radiator does not interfere with access.
- ⛽ Disconnect the fuel lines and remove the fuel pump if it is located in the tank or near the engine.
- 🔌 Remove the generator and starter, which are attached directly to the cylinder block.
Pay special attention ignition system. The spark plugs and coils must be removed carefully so as not to damage the threads in the cylinder head. In-game thread damage may require expensive repairs or replacement of the entire head, which is not cost effective for simple orders.
After removing the attachment, the engine should remain hanging only on the mounts to the gearbox and body mounts. Check that all connections are broken by visually pulling the block. If you did everything correctly, nothing should prevent it from moving.
The secret to fast work
Use X-Ray mode to see hidden mounting bolts that may be covered by other parts. This is especially useful when working with complex V-twin engines.
Disconnecting the transmission and fastenings
The next critical step is to separate the engine and gearboxes. In most cases in Car Mechanic Simulator 2018 These units are removed together, but sometimes their separation is required. To do this, you need to unscrew the bolts connecting the engine crankcase and clutch housing.
When unscrewing the last bolts, make sure that the unit will not go anywhere. In the simulator, the physics are simplified, but the logic remains the same: first we release the fasteners, then we remove the assembly.
| Connection type | Necessary tool | Number of bolts (average) | Difficulty |
|---|---|---|---|
| Engine - gearbox | Head 13mm | 6-8 | Average |
| Engine mount | Ratchet + Head | 2-4 | Low |
| Flywheel | Head 15mm | 6 | High |
| Clutch | Head 10mm | 4-6 | Low |
Don't forget to remove cardan shaft or wheel drives if they interfere with the removal of the unit. In front-wheel drive vehicles, axle shafts often have to be removed. In the game, this is done by simply dragging the parts into the inventory after unscrewing the fasteners.
☑️ Checklist before withdrawal
Removing the engine and working with the rack
When all connections are broken, the moment of truth comes - removing the engine from the engine compartment. Approach the vehicle and select the engine removal option. At this point, the unit will move to a special rack in your workshop, where you can work with it in comfortable conditions.
The rack fixes the engine in a horizontal or vertical position, allowing access to all its sides. This is where the most painstaking part of the work begins - complete disassembly node. You can remove the cylinder head to get to the valves and camshafts.
⚠️ Attention: When removing the cylinder head, be sure to check the condition of the cylinder head gasket. In the game it is always replaced, but in reality it is a critical element that affects compression and mixing of fluids.
Use the stand's rotation to inspect the engine from all sides. Often located at the bottom of the block is the oil sump and oil receiver, which also require attention. Do not ignore small parts, as their condition affects the overall assessment of the work performed by the customer.
Rotate the engine on the stand using the arrows on the interface to access hard-to-reach bolts on the bottom and rear of the block. This will save you a lot of time.
Disassembling the cylinder block and internal components
After installing the engine on the rack, you have full access to the internals cylinder block. First, remove the valve cover to assess the condition of the camshafts and rockers. If parts show wear or damage, they must be replaced with new or reconditioned ones.
Next comes the turn of the cylinder head. Unscrew the mounting bolts in the correct sequence (usually from the edges to the center or vice versa, depending on the type of engine) to avoid distorting the metal. Once you remove the head, you will see the combustion chamber and the tops of the pistons.
- 🔩 Remove the camshafts and inspect the cams for wear.
- 🛑 Remove valves, springs and oil seals, replacing worn elements.
- 🔄 Turn the engine over and remove the oil pan to access the crankshaft.
- 🔨 Remove the pistons along with the connecting rods, carefully knocking them out of the cylinders.
The crankshaft is the heart of the engine, and its condition determines the life of the entire unit. B CMS 2018 you can replace the crankshaft bearings or the entire shaft itself. Thorough cleaning of all channels and surfaces from carbon deposits and old oil is required before assembly.
When reassembling, use new gaskets and sealant where necessary. Proper bolt torque (this is controlled automatically in the game when using the correct tool) ensures the tightness and durability of the assembled engine.
The build quality of the engine directly affects its power and reliability. Don't skimp on gaskets and oil to avoid repeated repairs.
Reassembling and installing the engine back
The assembly process is a mirror image of disassembly, but requires even more care. Make sure that all parts are installed in their places and the timing marks are set correctly. Installation error timing belt or circuit may cause the engine to fail to start or cause serious damage.
Once the engine is completely assembled on the stand, install it back into the car. Connect the gearbox, then the mounts to the body. Replace all attachments, hoses and electrical connectors that were removed when starting work.
The final stage is to start the engine and check its operation. In the game, indicators will show whether the unit is assembled correctly. If all systems are working properly, you can remove the car from the lift and give the keys to a satisfied customer.
What should I do if the engine does not start after assembly?
First of all, check the battery connection and the presence of a spark at the spark plugs. Make sure the fuel pump is running and gasoline is flowing into the rail. Often the problem lies in incorrectly set timing marks or a forgotten connection of the crankshaft sensor.
Is it possible to tune the engine in CMS 2018?
Yes, the game allows you to install sports camshafts, improved intake and exhaust systems, as well as chip tuning. This increases engine power, but requires more precise tuning and quality components.
How to find rare engine parts?
Rare parts (marked in green or blue) can be found when dismantling old cars in a junkyard, in tool boxes, or purchased in specialized stores for in-game currency.