Game My Summer Car known for its meticulous approach to car assembly simulation, where every, even the smallest detail matters. One of these details that raises a lot of questions among beginners is inspection cover (inspection hatch cover). This small but important part is installed on the underbody, blocking access to the fuel tank and lines. Without it, the car will not pass technical inspection, and you will lose points for completeness.
Many players confuse this cover with other elements of the suspension or engine protection, trying to screw it in the wrong place. It is important to understand that inspection cover — this is an access hatch, and not a crankcase protection element. In real life, such hatches allow mechanics to quickly check the condition of the tank without completely removing it. In the game, this is simply a mandatory element for successfully passing a police check.
Installing this part requires some skill and understanding of the orientation of the machine in space. If you turn the part over or try to attach it with the wrong bolts, it simply won't fit into place. Below we will look in detail at where exactly the seat is located and what tools will be needed for installation.
⚠️ Attention: Do not attempt to install the cover while the vehicle body is on the ground. You just won't get to the mounting holes. Raise the body on a lift or use jacks to gain access to the underbody.
What is Inspection Cover and why is it needed?
Inspection cover It is a rectangular metal plate with characteristic holes for bolts. In the context of the game My Summer Car This part performs the function of sealing a hole in the floor of the car. This hole is technologically necessary for access to the top of the fuel tank and the fuel level sensor.
The absence of this cover leads to the fact that gasoline vapors, dirt and water can enter the car interior. Although the game does not simulate fumes, this detail is critical to the vehicle's final evaluation. During the inspection, the policeman will definitely check the presence of all body elements, including the bottom.
In addition, this part is often lost or sold by players by mistake at the beginning of the game when they need money for beer. If you sold the part, you will have to buy a new one from an auto parts store. Without it, the Satsuma assembly process can be considered incomplete.
- 🔧 Function: Blocks access to the fuel tank through the floor of the cabin.
- 🚗 Location: The central part of the bottom, under the interior carpet.
- 💰 Price: It is inexpensive, but required to pass a technical inspection.
If you've sold your cap, don't panic. It is always in stock at Teimo's Auto, just look for it in the body parts section or use the letter search.
Where to find Inspection Cover in the game
Finding this part depends on what stage your game is at. At the very beginning, when you first get the Satsuma in the garage, inspection cover It may already be lying somewhere in a pile of spare parts scattered on a workbench or floor. Often it is located next to other elements of the bottom or carpet.
If you accidentally sold a part or it got lost in the depths of the garage, it’s easy to buy it. Go to an auto parts store. You need to go to the counter and enter a letter code or select a part from a list. In the catalog it may be designated as part of the floor or body.
Also, the cover may fall out of the parts box if you bought a complete body or separate kits. Carefully inspect all corners of the garage, especially the area around the workbench and racks of small items. Sometimes parts get rolled under cabinets.
Exact installation location on the body
Now let's move on to the main question: where to put inspection cover. The installation location is on the bottom of the car, strictly along the central axis. If you are looking at the car from below, this hole is located towards the back of the front seat, above the fuel tank.
To install, you will need to remove the interior carpet. It was under the carpet, in the metal floor, that a rectangular hole was cut. The edges of this hole have welded studs or bolt holes into which the cover is screwed. It is important not to confuse it with the gas tank flap, which is located outside, at the back.
The cover is installed from inside the cabin, although it is attached to the bottom. In fact, you lie down in the interior, pull the cover into the hole (or apply it from below if you removed the floor, but in the game the floor is not removable) and tighten the bolts. In the game mechanics, the process is simplified: you simply take the part, go to the hole in the floor and press the installation button, after inserting the bolts.
| Parameter | Description | Value in game |
|---|---|---|
| Part name | Inspection Cover | Hatch cover |
| Location | Bottom / Interior floor | Center, under the carpet |
| Fastening | Bolts | 4 pieces in the corners |
| Tool | Wrench | Size 10 or 11 |
⚠️ Attention: Make sure you are not confusing inspection cover with fuel tank cover (gas tank flap cover). The latter is installed externally on the rear fender and has a different shape.
Step-by-step installation instructions
The installation process requires following a certain sequence of actions. First, make sure you have the cover itself and the four bolts to secure it. Bolts are often lost, so check the availability of fasteners in advance.
Next, remove the carpeting inside the car. To do this, you need to unscrew the bolts holding the carpet and simply move it to the side. A metal floor with a rectangular hole will open in front of you. This is where it is placed inspection cover.
Take the cap and place it over the hole. In the game you need to bring the part to the installation location and press the appropriate button (usually the left mouse button). After this, insert the bolts into the holes around the perimeter of the cover. Tighten the bolts with a wrench. Remember to turn clockwise to tighten.
☑️ Inspection Cover installation checklist
Once all the bolts are tightened, you can put the carpet back in place. Make sure the lid fits tightly and does not loosen. If everything is done correctly, when the car shakes there should be no extraneous knocks from under the floor.
The secret to quick installation
Instead of searching all over your garage for bolts, buy a set of universal bolts from the store. This will save you hours of searching for lost fasteners in a pile of junk.
Typical installation mistakes
The most common mistake is trying to install the cover from below car, lying under the car. Although it is technically more logical to install it from below, in the game the mechanics are designed to install from inside the cabin. If you try to attach it from the bottom, the game may not recognize the attachment point.
The second mistake is using the wrong bolts. This cover requires bolts of a certain size. If you take bolts from the engine that are too long or from plastic that are too short, they may not lock or go right through, damaging the tank (in theory). In the game, this simply will not allow the part to tighten.
The third mistake is ignoring the carpet. Some players put the cover on but forget to put the carpet back on. This does not affect the operation of the car, but during a technical inspection the police may make a remark for the lack of interior elements, although the main requirement is the presence of a cover.
- ❌ Error 1: Installation outside under the bottom instead of the interior.
- ❌ Error 2: Trying to fasten without bolts (the cover will fall).
- ❌ Error 3: The installation side (top/bottom) is reversed.
The main secret to success is to install the cover from the interior, having first removed the carpet, and use only standard bolts for the floor.
Installation quality check and inspection
After installation, be sure to check the quality of work. Drive your car on a rough road. If you hear the sound of metal on metal from underneath, the bolts are not tight enough. Go back to the garage and pull up inspection cover.
When it's time to go to the inspection, the police officer will check the underside of the car. He will look under the car and make sure that all openings are closed and the fuel system is tight. Having a properly installed lid will add points to your final score.
It is also worth noting that this cover prevents water from entering the interior while driving through puddles, which in the game can affect floor corrosion (if the corresponding modification is installed or in future updates). Take care of your car and it will last a long time.
What to do if the cover does not fit in place?
If the part does not stand up, check whether the carpet or other interior parts are in the way. Also make sure you are using the correct part - the inspection cover and not a plug for another hole. Try removing the carpet completely and cleaning the installation area.
Is it possible to drive without inspection cover?
Technically, the car will drive without it. The engine will run and the wheels will spin. However, you will not be able to pass the inspection, which means you will not receive a license plate. In addition, dirt will fly into the cabin and the wind will make noise.
How many bolts are needed for fastening?
To securely fix the inspection cover in My Summer Car, exactly 4 bolts are required. They are located at the corners of the rectangular lid. Use the appropriate size wrench to tighten them.
Where can I buy a new one if I sold the old one?
Go to the auto parts store (Teimo's Auto). Enter the part code or find it in the body parts section. The cost is low, so it’s easier to buy a new one than to spend hours looking for an old one in the garage trash.