Grass Ceramics for Auto: Should You Apply in?

The modern market of autochemistry is saturated with offers promising perfect body protection, but not all brands are able to surprise with the real result. In recent years, products combining accessibility and professional quality have been at the peak of popularity, and among them the line stands out. Grass. Many motorists, accustomed to seeing this brand as a manufacturer of budget household chemicals, are surprised to find that the company has reached the level of serious protective compounds.

Ceramic coating from this manufacturer is positioned as a solution for those who want to get a ceramic coating. hydrophobic And a deep gloss without overpaying for the names that were promoted. In this article, we will discuss in detail the composition, application technology and real performance properties of the product so that you can make an informed decision.

It is important to understand that applying any protective layer requires surface preparation, and Grass is no exception. The composition is based on silica (SiO2), which provides chemical resistance.The final result depends on the technology. Let’s take a look at what’s inside the bottle and how it works in practice.

What is Grass Ceramic Coating and Its Features

The product is a liquid glass with the addition of ceramic components, which, after polymerization, forms a strong transparent film on the paint coating (LCP). Unlike traditional waxes, which are washed through several sinks, ceramics create a chemical bond with the surface. The formula is developed taking into account the climatic conditions typical for the CIS countries, where roads are actively treated with reagents.

The main feature of the line is the balance between the hardness of the coating and its elasticity. Too hard compounds often crack during microscopic deformations of the body or washing, and too soft quickly wear off. Grass The company managed to find a compromise, providing the stated persistence of up to 12 months with proper care. The product fills the microscopic pores of the varnish, making the surface perfectly smooth.

⚠️ Note: Do not apply the composition on a hot body or under direct sunlight. Rapid drying will lead to the formation of rainbow spots, which are extremely difficult to remove without polishing.

The composition does not contain abrasive substances, which allows it to be used on fresh varnish without the risk of damage. However, for older cars with matte varnish, pre-restorative polishing is mandatory, otherwise you will preserve all scratches under the protection layer. The key element here is a solvent, which evaporates, leaving only a solid residue.

Key advantages and claimed characteristics

The manufacturer claims a number of impressive properties that theoretically should solve most of the problems of car owners. The main trump card is hydrophobicThe water is then thrown off the body, carrying dirt with it. This not only makes it easier to wash, but also reduces the likelihood of bitumen spots forming, as dirt comes in less contact with the surface.

Other stated benefits include:

• 🛡️ Chemical inertia Protection from aggressive road reagents, bird droppings and acid rain.
• ✨ Deep gloss - increased color saturation and the appearance of the effect of a "wet" body.
• 💧 Antistatic effect The body attracts less dust in dry weather.
• ☀️ UV filter - prevention of paint burnout under the influence of ultraviolet light.

The real hardness of the coating on the Mohs scale is about 7-9H, which makes it resistant to small mechanical influences, for example, to shrubs branches or a rigid brush on an automatic wash. However, it is worth remembering that from serious blows with stones or keys this will not save. Grass It is positioned as a “smart protection” that works in a complex manner.

Comparing Grass to Competitors: Market Analysis

To objectively evaluate the product, it is necessary to compare it with analogues. There are both expensive professional trains (Koch Chemie, Gyeon) and budget options on the market. Grass is in the middle segment, offering characteristics close to the premium, but at the price of the mass market.

The table below compares the key parameters:

Parameter	Grass Ceramics	Budget waxes	Professional ceramics
Term of service	12 months	1-2 months	2-5 years
hydrophobe	High-pitched	Medium.	Extremely extreme.
Difficulty of application	Medium	Low.	Tall.
Price per set	Medium	Low.	Tall.
Scratching protection	Basic	Absent.	Enhanced.

Unlike cheap polishes that just make a greasy film, Grass It penetrates the varnish structure. However, professional two-component compositions still benefit in durability and hardness. For a daily car that is operated in the city, the Grass variant is quite enough.

Body preparation: a critical stage

The success of application is 80% dependent on the quality of preparation. If you miss this stage, even the most expensive composition will lie unevenly and quickly wash away. The first step should be careful. contactlessRemoving the main dirt and sand. The use of sponges at this stage is strictly prohibited in order to avoid scratches.

Then comes the deep cleaning phase. It is necessary to use a clay napkin or clay bar with lubricant. This will allow you to pull out of the pores of the varnish metal inclusions (brake dust) and bitumen, which does not take ordinary chemistry. After the clay, the body will be smooth as glass, but matte.

The final touch is degreasing. For this purpose, a special drug is used, often included or purchased separately. It removes the remnants of polishing pastes and silicones. You can apply ceramics only on a perfectly clean, dry and fat-free surface in a room with a temperature of +15 to +25 ° C.

⚠️ Note: Do not use household degreasers (for example, for windows or kitchens). They can leave film or damage plastic body parts.

Technology of application with their own hands

The application process requires accuracy and haste. You will need an applicator (usually included), high quality microfiber towels, and good lighting. Work should be done in stages, processing parts one by one (for example, one door or half a hood).

Apply a few drops of the composition to the applicator and distribute it over the surface with cruciate movements. Do not press hard, the layer should be thin and barely noticeable. After distribution, you need to wait a certain time (usually 3-5 minutes, depending on the temperature) until the composition begins to mat.

Algorithm of action:
1. Shake the bottle 10-15 times.
2. Apply 3-4 drops to the applicator.
3. Rub the area 50x50 cm.
4. Wait 3-5 minutes until the rainbow film appears.
5. Polish with pure microfiber until shine.

It is important to change the side of the polishing towel often so as not to smear the excess. If you overstay the composition, it can boil, and it will be difficult to remove it. In this case, you will have to apply the composition again over and immediately polish, using solvent to take out the surplus.

What to do if there are divorces?

If you notice divorces after drying, do not try to wipe them with a dry cloth - scratch the varnish. Apply a little composition on top of this area and polish it again with a clean microfiber. If it doesn’t help, use a degreaser.

Coverage care and extension of service life

After application, the ceramics take time for complete polymerization. It usually takes 12 to 24 hours, during which time it is best not to wet or put the car in the rain. In the first week, it is not recommended to use active chemistry for washing.

For daily care, shampoos with a neutral pH and wax or ceramic content are ideal. They help to refresh the hydrophobic layer. Avoid using alkaline shampoos and “folk remedies” like Fae, which instantly destroy the protective layer.

• 🚿 Wash the car as it is polluted, not letting the dirt dry with a crust.
• 🧽 Use only soft sponges and the two-bucket method.
• 🚫 Avoid automatic washers with hard brushes-"sausages".

Every 2-3 months it is recommended to use a supportive spray ceramics (top-up). This will prolong the life of the main coating and return the aggressive hydrophobe. Grass It produces a companion lineup that is perfectly compatible with their main composition.

Frequent mistakes when applying independently

Many beginners face problems precisely because of neglect of detail. The most common mistake is poor degreasing. If the varnish will remain silicone from the previous polish, the ceramics simply will not lie down, but will gather in drops, leaving after drying the stain.

The second mistake is using dirty or cheap towels. The pile from a bad microfiber can scratch the fresh coating before it has yet to stand. Also, the temperature regime is often ignored: in a cold garage, the composition does not polymerize, and in a hot one, it dries too quickly.

⚠️ Warning: Never apply the composition to plastic unpainted elements (black bumper, moldings). Ceramics will leave white irremovable divorces on them, which can only be removed by polishing with abrasive.

The third mistake is saving on lighting. Without a bright light source (lightlightlight), you won’t physically see where the leaks or unpolished areas are left. Control the process must be at an angle, in side light.

Final assessment and feasibility of purchase

Ceramics Grass It is a great choice for those who are looking for a balance between price and quality. It does not claim to be an “eternal” coating, but it performs its function of protection and beauty on a solid four-plus. For a fresh car or after polishing, this is the best way to keep the results for the long term.

If you are willing to spend 3-4 hours on high-quality preparation and careful application, the result will please you. The car will be easier to wash, brighter to shine and better resist the city mud. This is an investment in the safety of the LKP, which pays off the pleasure of driving a clean car.

In conclusion, the autochemical market is moving forward, and mid-range products are getting better. Grass proved that affordable ceramics can work no worse than expensive counterparts when observing the technology.

Where can I buy the original?

Buy products only at official points of sale or large chain stores of autochemistry. On marketplaces, there is a high risk of running into a fake or a product that was stored at the wrong temperature.

Questions and Answers (FAQ)

Can Grass ceramics be applied to matte film or matte varnish?

It's not recommended. Ceramic compositions when drying create a glossy layer that will change the appearance of the matte surface, making it spotty and shiny. For matte coatings, there are special hydrophobisers.

How many layers of ceramics can be applied for the best effect?

It is optimal to apply 1-2 layers. The second layer can be applied 1-2 hours after the first. Applying more than two layers makes no practical sense: the hydrophobe will not become stronger, and the thickness of the layer can lead to uneven drying.

Will the ceramics remove the existing scratches?

No, ceramics are a protective coating, not abrasive polyrene. It can only visually hide micro-scratched (web) by filling pores, but the deep risks remain visible. Pollination is required before application.

How long does the coating dry completely?

Primary polymerization (when you can touch the machine) occurs after 1-2 hours. Full curing and a set of maximum properties takes from 7 to 14 days. During this period, it is advisable to avoid intensive washers with chemistry.

Should I polish the car before applying it if it is new?

Yes, even new cars from the cabin often present defects of the LCP (holograms, dust) and transport pollution. Light polishing and clay cleaning are essential for the ideal result.