New rollers for the Garage 52 gate: review of models, prices and step-by-step installation

Garage doors Garage 52 remain one of the most popular solutions for private garages in Russia due to their reliability and affordable price. However, even the most durable structure requires periodic maintenance - this is especially true roller mechanismswhich provide smooth opening and closing. In 2026, the manufacturer updated the line of rollers, offering improved materials, quiet bearings and enhanced corrosion protection.

If your gate begins to squeak, stick, or requires excessive force to move, it's likely time to replace the rollers. In this article we will look at all new roller models for Garage 52, their technical features, prices and we will give step-by-step instructions for replacement. You will also learn how to avoid common installation mistakes and extend the life of the mechanism.

Important: the information is relevant for gates Garage 52 all modifications (standard, reinforced, with automatic) released after 2018. Older models (before 2015) may require adapters or non-standard solutions - we will also mention this.

New videos for 2026: what has changed?

The manufacturer "Garage 52" presented an updated line of rollers, taking into account user feedback and modern requirements for durability. Main innovations:

• 🔹 SKF bearings - top models use sealed bearings of the Swedish brand, which do not require lubrication and can withstand up to 50,000 cycles opening/closing.
• 🔹 Polymer coating - series videos Premium now have anti-corrosion coating Zincrometal, which increases service life by 3 times in aggressive conditions (humidity, salt on the roads).
• 🔹 Silent rollers - in models Silent a rubber insert is used that dampens vibrations and reduces noise to 20 dB (against 40–50 dB for standard ones).
• 🔹 Universal mounts - now all rollers are compatible with width guides 50 mm and 60 mm without modifications.

According to company representatives, the new rollers have been tested in climate chambers at temperatures ranging from −40°C up to +60°C, as well as tests for resistance to sand and dust (protection class IP54). This makes them suitable for use even in regions with extreme weather conditions.

Review of models: which videos to choose?

In 2026, the line of rollers for Garage 52 includes 5 main models, differing in materials, load and noise level. Below is a comparison table with key characteristics:

Model	Bearing type	Max. load (kg)	Noise level (dB)	Price per set (4 pcs.), RUR	Features
Garage 52 Standard	Open (2RS)	120	40–50	1 200–1 500	Basic model, requires regular lubrication
Garage 52 Silent	Closed (ZZ)	150	20–30	2 800–3 200	Rubber inserts for silent operation
Garage 52 Premium	SKF (2RS)	200	25–35	4 500–5 000	Anti-corrosion coating, maintenance-free
Garage 52 Reinforced	Reinforced (LLU)	250	30–40	3 800–4 200	For heavy gates (with insulation, automatic)
Garage 52 Economy	Plastic sleeve	80	50–60	800–1 000	For light gates, short-term solution

How to choose the right model?

• 🔧 For standard gate suitable without insulation Garage 52 Standard or Silent (if low noise level is important).
• 🔧 If the gate insulated or automatic, choose Reinforced or Premium - they can withstand more weight.
• 🔧 For temporary replacement (for example, at the dacha) you can take Economy, but keep in mind that the service life of such rollers is no more than 1–2 years.

⚠️ Attention: Rollers Garage 52 Premium are not compatible with gates manufactured before 2018 due to the changed axle diameter. For older models, adapter sleeves will be required (part number GR-ADAPT-2017).

Step-by-step instructions for replacing rollers

Replacing the rollers on the Garage 52 gate does not require special skills, but it is important to follow the algorithm to avoid distortions or damage to the guides. You will need:

• 🔧 Set of wrenches (on 10, 13, 17).
• 🔧 Phillips screwdriver.
• 🔧 Puller for retaining rings (if the rollers are on bearings).
• 🔧 Lubrication Litol-24 or CIATIM-201.
• 🔧 Level (to check horizontality).

Step 1. Dismantling old rollers

1. Raise the gate to the top position and secure it with ties or wooden blocks.
2. Remove the protective covers from the roller carriages (if equipped).
3. Unscrew the nuts securing the roller axle using a wrench 13 (models up to 2020 may require a key 17).
4. Remove the axle and remove the roller from the guide. If the roller is stuck, use a puller or gently tap the wooden spacer with a hammer.

Step 2. Install new rollers

1. Check the condition of the guides - if there is rust or deformation, sand them with sandpaper or replace them.
2. Apply a thin layer of lubricant to the new roller shaft.
3. Install the roller into the carriage and secure the axle with the nuts, without fully tightening them.
4. Check the free play of the roller - it should rotate without jamming.

Step 3. Adjustment and testing

1. Lower the gate and check for smooth operation. If the gate moves tightly, loosen the nuts securing the carriages on 0.5–1 turn.
2. Adjust the position of the carriages so that the gap between the roller and the guide is 1–2 mm.
3. Apply lubricant to the rails and test the gate 5-10 times.

Typical replacement mistakes and how to avoid them

Even experienced craftsmen sometimes make mistakes that lead to premature wear of the rollers or breakage of the gate. Here are the most common ones:

• ❌ Tightening the nuts - this leads to jamming of the rollers and increased load on the bearings. Solution: tighten the nuts until they stop and then loosen them 1/4 turn.
• ❌ Ignoring lubrication — rollers without lubrication wear out 2–3 times faster. Solution: use Litol-24 or specialized bearing lubricants (for example, Molykote G-Rapid Plus).
• ❌ Model mismatch — installation of rollers from other manufacturers (for example, DoorHan or Alutech) may result in incompatibility with the guides. Solution: buy rollers with markings Garage 52 or check the sizes with the seller.
• ❌ Neglect of adjustment — if the carriages are installed crookedly, the gate will jam. Solution: Use a level to check that the guides are level.

⚠️ Attention: If after replacing the rollers the gate fall spontaneously, the problem may be worn springs or misaligned guides. In this case, comprehensive diagnostics are required - replacing the rollers alone will not help.

What to do if the roller jams during dismantling?

If the roller cannot be removed due to corrosion, treat the axle with a penetrating lubricant (for example, WD-40) and wait 10–15 minutes. Then gently tap the axle through the copper or aluminum spacer. Do not use a metal hammer directly as this may damage the threads.

Where to buy original videos and how not to run into fakes

Original videos for "Garage 52" are sold in several places:

• 🏬 Official dealers - list on the website garage52.ru (section “Where to buy”). Prices here are higher, but you are guaranteed to receive a certified product.
• 🛒 Marketplaces — Wildberries, Ozon, Yandex Market. Look for sellers with ratings above 4.8 and reviews of original parts. Pay attention to the packaging - the original must have a hologram and markings GOST R 52605-2023.
• 🏗️ Construction stores — Leroy Merlin, Castorama. There are often universal rollers that may not be suitable. Always check the item number!

How to distinguish an original from a fake?

• 🔍 The packaging must contain QR code, which leads to the manufacturer's website.
• 🔍 Rollers Premium and Silent have laser engraving with logo Garage 52 on the body.
• 🔍 Included warranty card with dealer's stamp.
• 🔍 Fakes are often lighter in weight (due to cheap alloys) and have play when rotating.

In 2026, the manufacturer began marking original videos with a hologram that changes color when tilted - this is the most reliable way of verification. If there is no hologram, it is better to refuse the purchase.

Lubrication and maintenance: how to extend the life of rollers

Even the best quality rollers require regular maintenance. Here are the basic rules of service:

• 🛢️ Lubrication - apply it to the roller axis and guides every 6 months (or more often if the garage is not heated). Use lithium-based lubricants - they do not thicken in the cold.
• 🧹 Cleaning — remove dirt and dust from the guides with a soft brush or vacuum cleaner. Do not use water - it may cause corrosion.
• 🔧 Adjustment — check the gaps between the roller and the guide once a year. Optimal clearance - 1–2 mm.
• 🌡️ Moisture protection - if the garage is not insulated, install seals on the gates (for example, D-profile made of rubber).

What to do it's impossible:

• ❌ Lubricate the rollers vegetable oil or solid oil - they attract dust and thicken quickly.
• ❌ Use WD-40 As a permanent lubricant, it is a cleaner, not a lubricant.
• ❌ Paint over rollers or guides - paint can get into the bearings and jam them.

User reviews: pros and cons of new videos

We analyzed reviews from owners of the Garage 52 gate on the forums (Drive2, GarageClub) and marketplaces. Here's what they have to say about the new videos:

Pros:

• ✅ Silent — “The creaking has completely disappeared, the gate opens almost silently” (Alexey, Moscow).
• ✅ Premium — “I installed it 2 years ago, they don’t require any maintenance” (Igor, Yekaterinburg).
• ✅ Reinforced — “Insulated automatic gates can withstand and do not sag” (Sergey, Novosibirsk).

Cons:

• ❌ Standard — “A year later they started creaking again, I had to lubricate them” (Dmitry, Kazan).
• ❌ Economy - “They served for six months and fell apart” (Anton, Rostov-on-Don).
• ❌ Premium — “Expensive, but worth it” (Oleg, St. Petersburg).

The most common complaint is high price for models Premium and Silent. However, users note that in the long run they are more profitable due to the lack of the need for frequent maintenance.

FAQ: answers to frequently asked questions

Is it possible to install rollers from another manufacturer on the Garage 52 door?

Theoretically yes, but only if they match axle diameter (10 mm or 12 mm) and guide width (50 mm or 60 mm). However, the original rollers are guaranteed to fit the geometry, so it is not recommended to take risks. If you want to save money, choose rollers DoorHan or Alutech with similar parameters, but be prepared for possible modifications (for example, sharpening the carriages).

How many rollers do I need to buy to replace?

The standard kit for Garage 52 doors includes 4 rollers (2 on each side). However, if the gate is heavy (with insulation, automation) or is used intensively, it is also recommended to replace upper support rollers (2 more pieces). Thus, the complete set is 6 rollers. Sellers often offer sets of 4, but check to see if you need additional ones.

What is the best lubricant to use for rollers?

Optimal options:

• Litol-24 - universal, inexpensive, withstands frosts up to −40°C.
• CIATIM-201 - better protects against moisture, but thickens when −30°C.
• Molykote G-Rapid Plus — professional lubricant for bearings, reduces noise.

Do not use graphite lubricant or solid oil - they quickly collect dust and turn into abrasive.

What should I do if the gate is difficult to open after replacing the rollers?

Causes and solutions:

1. Nuts overtightened - loosen them up 1/4–1/2 turn.
2. Size mismatch - check whether the rollers are suitable for your gate model (for example, for gates before 2018 you need rollers with an axle 12 mm, not 10 mm).
3. Deformation of guides — if the rails are bent, they need to be aligned or replaced.
4. Spring wear - if the gate is heavy, the springs may not cope. In this case, they require adjustment or replacement.

Is it possible to replace the rollers yourself or is it better to call a specialist?

Replacing rollers is not the most difficult procedure, and even a beginner can handle it if you have the tools. However, in some cases it is better to turn to professionals:

• If the gate with automatic drive — Incorrect installation may damage the mechanism.
• If the guides deformed or require replacement.
• If you are not sure about the choice of roller model (for example, for gates before 2015).

The average cost of replacing rollers by a technician is: 1 500–2 500 ₽ (excluding cost of parts).