Attachments for Dyson Styler: a complete guide to selection, use and care

Stylers from Dyson - these are not just hair dryers or curling irons, but high-tech devices that can replace a whole arsenal of hairdressing tools. But their real magic is revealed only with the right attachments. Without them, even the most advanced Dyson Airwrap or Dyson Corrale turns into an expensive toy with limited functions. The problem is that the range of attachments is so wide (and constantly updated) that it is almost impossible to understand their purpose and compatibility without an expert guide.

In this article we let's look at it in detail all official and third-party attachments for stylers Dyson, we'll explain what problems they solve, how to use them correctly (including rare life hacks from professionals), and why some combinations can ruin your hair instead of transforming them. We will also reveal the secrets of care that will extend the life of the attachments by 2-3 times.

Spoiler: if you think that the nozzle 30mm barrel suitable only for large curls, and brush-round - exclusively for volume at the roots, you miss half of their capabilities. And this is not the most amazing discovery that awaits you.

1. Types of attachments for Dyson Styler: official classification and hidden functions

Company Dyson divides the nozzles into three main categories: for drying, styling and styling. But this is a simplified diagram - in practice, many attachments perform several tasks at once, if you know the nuances of their use. For example, diffuser nozzle not only preserves the natural texture of curls, but can also be used to create beach waves on straight hair with the correct technique.

Officially, all attachments are divided according to styler models:

• 🔹 For Dyson Airwrap (all generations): barrels, brushes, combs, diffusers
• 🔹 For Dyson Corrale: flat attachments (clamps) only
• 🔹 Universal: some attachments from Airwrap compatible with Supersonic (eg diffuser)

But there are pitfalls: nozzles from Airwrap Multi-Styler (2023+) do not fit the first version Airwrap (2018) due to modified mounting. About this Dyson is silent in marketing materials.

Critical Information: Magnetic Attachments (Series Coanda) cannot be used on damaged or severely thinning hair - the air flow can cause split ends due to increased friction.

Let's look at each category in more detail:

Nozzle type	Main purpose	Hidden Features	Compatibility
Barrels (20/30/40 mm)	Creating curls and waves	Straightening individual strands during reverse movement	Airwrap (all versions)
Brush round	Volume at the roots	Smoothing frizzy hair (alternative to ironing)	Airwrap, Supersonic
Coanda comb	Leveling and stacking	Creating a "wet effect" when used with gel	Airwrap only
Diffuser	Drying curls without frizz	Texturing straight hair (beach wave effect)	Airwrap, Supersonic
Flat Clamp (Corrale)	Straightening and curling	Creating a zigzag texture when rotated 90°	Only Corrale

2. Compatibility of attachments: which ones are suitable for your styler model

This is the most painful issue for owners Dyson. The company regularly updates attachment mounts, but does not always warn customers about incompatibility. For example, nozzles from Airwrap Multi-Styler (2023) won't fit to the original Airwrap (2018) due to a modified magnetic connector. However, visually they are almost identical.

Here is the current compatibility table (for 2026):

• 🔧 Dyson Airwrap (1st generation, 2018): Only compatible with attachments included in the kit or purchased separately until 2020. New attachments (from 2021+) will not work.
• 🔧 Dyson Airwrap Multi-Styler (2023+): Works with all current generation attachments, but does not support older barrels or brushes.
• 🔧 Dyson Supersonic: Only compatible with diffuser and round brush (styling attachments from Airwrap won't fit).
• 🔧 Dyson Corrale: Uses unique flat clip attachments not compatible with other models.

How to check compatibility? Look for the markings on the nozzle box:

• 📌 AW1 - for the first generation Airwrap
• 📌 AW2 or MS - for Multi-Styler
• 📌 CR1 - for Corrale

If there is no marking, it is 100% fake.

3. Top 5 mistakes when using attachments (and how to avoid them)

Even professional hairdressers sometimes make mistakes when working with Dyson. Here are the most common mistakes that damage hair and shorten the life of attachments:

1. 🔥 Hair overheating. Nozzles Dyson heat up to 150–180°C, but many use the maximum temperature for all hair types. Solution: For fine or colored hair, never exceed 130°C (Cool or Medium setting).
2. 🌀 Wrong direction of travel. When winding hair on a barrel, the movement should be from roots to ends, and not vice versa. Otherwise, the curls will turn out uneven and the hair will become tangled.
3. 💨 Ignoring air flow. In nozzles with effect Coanda (for example, a comb) the hair is automatically attracted to the surface. If you press them too hard, the effect disappears and styling takes 2 times longer.
4. 🧴 Applying products immediately before styling. Gel, mousse or spray should be applied to wet hair (not wet!) and let it dry for 2-3 minutes. Otherwise, the nozzle will “glue” the strands together.
5. ⚡ Storing raw bits. After use, they need to be dried and cleaned of any remaining varnish/gel. Otherwise, the magnetic mount will oxidize and the plastic will become cloudy.

What happens if you use a Corrale attachment on an Airwrap?

Flat nozzles Corrale don't physically approach Airwrap — they have different types of fastening (clamp vs. magnetic connector). An attempt to “adjust” them by force will lead to breakage of the styler.

Error No. 3 is especially dangerous for owners Airwrap Multi-Styler. In this model, the air flow is automatically regulated, and if you block it with your hand (for example, by pressing your hair against the comb), the sensors become confused and the styler begins to work incorrectly.

4. How to care for attachments: extend life by 2–3 times

Nozzles Dyson cost from 3,000 to 8,000 rubles apiece, so proper care is not a whim, but savings. Basic rules:

• 🧼 Cleaning after every use. Use a soft brush (such as a toothbrush) and a damp microfiber. An alcohol solution (1:1 with water) is suitable for removing varnish. Never use abrasive products!
• 🌬️ Drying. After cleaning, leave the attachments on a dry towel for 10-15 minutes. Keeping them wet is a sure way to cause corrosion of the magnetic mount.
• 🧲 Magnetic mount. Once a month, wipe the metal contacts with a dry cloth. If they have oxidized, use an eraser to clean them (yes, a regular office eraser!).
• 🔌 Storage. Keep the attachments in their original case or separate container. Throwing them into a drawer with other accessories means dooming them to scratches and chips.

What you should absolutely not do:

⚠️ Attention: Do not use attachments Dyson with other hair dryers or curling irons - even if they are the same diameter. Air pressure and temperature in devices of other brands are not designed for technology Coanda, and this can lead to melting plastic or overheating of hair.

For deep cleaning, you can use a steam cleaner every 3 months (for example, Rowenta or Kärcher), but only in gentle mode (steam temperature not higher than 80°C).

5. Secret life hacks from hairdressers: non-obvious ways to use them

Professionals know: nozzles Dyson can do much more than what is written in the instructions. Here are a few techniques that are rarely revealed even in salons:

• 🎨 40 mm barrel for volume at the roots. Instead of curling your hair, press the barrel into your roots and direct the air flow upward. The result is a “crown” effect, like after a salon blowout.
• ✂️ Coanda comb for dry cutting. If you trim the ends of wet hair, they will then “rise” when drying. With a comb you can trim the length of dry hair with perfect precision.
• 🌊 Diffuser to create texture on straight hair. Apply texturizing spray, then “whisk” strands with a diffuser on low speed. It will turn out natural beach waves without thermal influence.
• 🔄 Round brush for "reverse styling". If you brush from the ends to the roots (and not vice versa), the hair will be straightened, but will retain its natural shine - ideal for fine hair that gets frizzy from ironing.

Pro feature: For ultra-long-lasting styling, use a combination Coanda comb + barrel 30 mm. First, straighten the strands with a comb (temperature 150°C), then curl them into a barrel (120°C). The curls will last 2-3 days even without hairspray.

But be careful: these techniques take practice. For example, when “reverse styling” with a brush, it is easy to overdo it with tension and tear out the hair. Start with the minimum air flow rate.

6. Third-party attachments: is it worth saving?

Original nozzles Dyson expensive, so many are looking for alternatives from third-party brands (e.g. Shark, Revlon or Chinese equivalents). But there are three critical points here:

1. Materials. Counterfeits often use cheap plastic, which melts at temperatures above 120°C. Original nozzles can withstand up to 200°C.
2. Fastening accuracy. Even if the attachment “sits” on the styler, the magnetic field may be weaker and it will fall off during styling.
3. Coanda effect. In non-original attachments, the air flow is distributed unevenly, so the hair does not “stick” to the surface, but flies away.

The only case where third-party attachments are justified is diffusers. Their design is simpler, and high-quality analogues (for example, from Babyliss) work no worse than the original ones. But even here there is a nuance: check that the air holes match the diameter of your model Dyson.

⚠️ Attention: Using non-original attachments with effect Coanda (combs, barrels) can lead to overheating of the styler motor. The point is that the sensors Dyson are designed for a specific air resistance, and fakes change it.

If you still decide to take a risk, choose nozzles marked OEM-compatible and check reviews on thematic forums (for example, Reddit r/Dyson or Haircare Forum).

7. How to choose a nozzle for your hair type: detailed guide

There are no universal attachments - what is ideal for thick curls will ruin thin, straight hair. Here are the type recommendations:

Hair type	Recommended attachments	Temperature, °C	Flow rate
Thin, straight	Round brush 40 mm, Coanda comb	120–130	Low/medium
Thick, wavy	30 mm barrel, diffuser	140–150	Medium/High
Curly (3A–3C)	Diffuser, barrel 40 mm (for stretching)	130–140	Low
Tough, naughty	Flat Clamp (Corrale), Coanda Comb	160–180	High
Painted/damaged	Round brush, diffuser	Up to 120	Low

For combined types (e.g. curls at roots + straight ends) use a combination of attachments: first a diffuser for texture, then a barrel for ends.

Important nuance: If you have hair below shoulder blades, barrels of 20–30 mm will be ineffective - you need attachments from 40 mm, otherwise the curls will turn out too small and will not hold their shape.

FAQ: Frequently asked questions about Dyson attachments

Can I use Airwrap attachments on my Dyson Supersonic?

Only two attachments are compatible: diffuser and brush-round. Barrels, combs and other accessories from Airwrap to Supersonic will not fit due to different types of fastening and air supply system. Check the markings on the nozzle: if there is an inscription Compatible with Supersonic, it can be used.

Why does the attachment not stay on the styler and falls?

There are three reasons:

1. Oxidation of the magnetic mount (you need to clean the contacts with an eraser or alcohol).
2. Incompatibility of generations (for example, a nozzle from Airwrap 2023 on the old Airwrap 2018).
3. Mechanical damage to the connector (requires repair at a service center).

If the attachment is new and original, check whether the styler is overheating - if it overheats, the magnetic field weakens.

Which barrel to choose for short hair (shoulder length)?

Ideal for shoulder length barrel 20 mm — it creates elastic curls that will not “creep” on short strands. A 30 mm barrel is suitable if you want softer waves, but they will have to be fixed with varnish. For volume at the roots, use round brush 30 mm instead of a keg.

Can I dye my hair straight after styling my Dyson?

No! After heat styling (especially with attachments Coanda) the hair cuticle is slightly open, and the dye will lie unevenly, and the color will wash out faster. Wait at least 24 hours after installation before painting. If you urgently need to touch up your roots, use temporary paints (for example, L'Oréal Magic Retouch).

What to do if the nozzle starts to smoke?

Turn off the styler immediately! Smoke means:

• There were traces of varnish/gel on the nozzle that were burnt.
• Dust or hair got inside and melted.
• A non-original nozzle is used that is not designed for high temperatures.

Clean the nozzle with alcohol and check the air ducts for blockages. If smoke appears again, contact service (this may be a malfunction of the heating element).