Coffee machine DeLonghi Magnifica Start It is a reliable automatic espresso center, designed for daily use. However, even the best technology periodically signals failures in work. The display on the control panel can light up in different colors, alerting the owner to a maintenance need or a more serious malfunction.
Ignoring machine signals often leads to a simple blockage escalating into a complex breakdown that requires expensive repairs at a service center. Understanding what exactly the flashing symbol means allows you to quickly return the device to operation. In most cases, The problem is solved on its own In a few minutes without calling the master.
This guide will help you understand the error codes, the difference between a water shortage signal and a serious electronics failure. We will look at typical situations when a red triangle burns or a steam indicator flashes, and give clear instructions for troubleshooting.
Decoding of the main indicators and signals
Control panel Magnifica Start It is equipped with a set of LEDs, each of which is responsible for a specific node. The red triangle with the exclamation point is a universal indicator of anxiety. If it is constantly burning, it usually indicates that gateway Or the waste tray is not fully inserted. In this case, the machine blocks the coffee preparation for safety reasons.
A flashing red triangle often indicates problems with the brewing system. This could mean that the brewing block is contaminated and requires washing, or it simply didn’t fall into place after being removed. It is important not to confuse this signal with the scale indication, which has its own symbol in the form of lime plaque.
If a red triangle is burning, first check the closing density of the door for the brewing block, even if it appears to be closed visually.
Indicators of cups, which light up simultaneously or in a certain sequence, may indicate washing or heating modes. When switched on, the machine always performs automatic flushing, and at this point various symbols may flash. This is a regular situation and user intervention. required.
The constant light of the indicator indicates the state, and the blinking is the process or demand of action from the user.
Problems with water supply and boiler
One of the most common reasons for stopping the work of the coffee machine is the lack of water in the tank. If the corresponding indicator is lit, it is necessary to add water. However, if the tank is full and the signal does not go out, the problem may lie in the contacts of the tank or in the float system inside the tank.
Sometimes there is water in the tank, but the machine makes a mistake. This happens if the tank is mounted curved and not to the point. In such cases, the contacts do not close, and the electronics DeLonghi He thinks there's no water. It is also worth checking whether the contacts at the bottom of the tank and the response part on the body of the car are not contaminated.
If the car is buzzing but water is not entering the system, it may have formed an air traffic jam. This often happens after a long downtime or filter replacement. To eliminate, you need to start the hot water or steam supply mode to pump the system.
How to remove the air traffic jam
Remove the water tank. Turn on the tankless car. When the water shortage indicator lights up, slowly insert the tank back in. The machine will begin to pump water noisily, eliminating suffocation.
The bigger problem is scaling. When the indicator of lime plaque flashes, the machine requires a descaling procedure. Ignoring this requirement leads to boiler-heating And the quality of coffee is reduced. In some models with a strong blockage, the machine can completely block the work.
Brewing block errors and grinding
The brew group is the heart of the coffee machine. If the indicators signal a problem with it, the first thing to do is to remove the mechanism for inspection. Nana Magnifica Start This is done easily through the service door. A common mistake is to try to insert the block without combining the guides, which causes the position sensors to act.
If the coffee machine is noisy, but the coffee does not go, or there is a very thin trickle, perhaps too fine grinding is chosen. Adjustment of knives of the coffee grinder is carried out by a special lever inside the compartment for grains. You can change the settings. only during the course of work The squirrels, otherwise the mechanism can be damaged.
☑️ Diagnosis of the brewing block
Coffee may not be served either because the beans are too oily or, conversely, overdried. In the first case, sticking occurs in the millstones, in the second - coffee wakes up through the millstone, without grinding. The use of high-quality medium-roasted grains minimizes the risks of grinding errors.
If after cleaning the error does not disappear, perhaps the engine of the brewing unit or pressure sensor has failed. In this case, a diagnosis is required at the service center. Self-disassembly of the electromechanical part can lead to loss of warranty.
Table of error codes and indicators
For quick navigation on possible faults, use the table below. It systematizes the main signals that can be sent. DeLonghi Magnifica Start.
| Indicator/Symbol | Status of glow | Probable cause | Action. |
|---|---|---|---|
| Red triangle | It's burning all the time. | Service door open. | Close the door of the brewing block tightly |
| Red triangle | Migayette | Contaminated brewing block | Extract and wash the brewing mechanism |
| Water indicator | Burning/Migaet | No water/ Air traffic jam | Add water, check the installation of the tank |
| Scale indicator | Migayette | Decalcination is required. | Conduct a procedure for removing scale |
| Cup indicators | Blink alternately | The heating/washing process is underway | Waiting for the cycle to be completed (automatically) |
It is important to understand that blinking combinations can vary depending on your model’s firmware version. If the machine’s behavior doesn’t match the description in the instructions, try resetting the device completely or restarting the device.
When cleaning the brewing unit, never use detergents or soap, only warm water. Chemistry can damage food coatings and worsen the taste of coffee.
Resolving leaks and problems with the capuchinator
The appearance of a puddle under the car or in a pallet for drops above normal often scares users. However, in Magnifica Start There's a big pallet. If the water is overflowing, it means you rarely empty the pallet or use too much water when washing.
If water drips from the vapor supply nozzle or cappuccinator, check the purity of the tube. Milk residues can dry and create a plug that interferes with the normal flow of fluid. Regular washing of the cappuccinator after each use is the key to its long service.
⚠️ Attention: If water flows from under the machine constantly, even when it is turned off, this may indicate a malfunction of the water supply valve or a crack in the hydraulic system. The operation of such a device is dangerous!
Also, leaks can occur due to improper installation of a pallet or a crowded container for coffee grounds. The machine is equipped with a cakecake fill sensor, but if you shake the container out when the car is off, the meter does not reset, and the machine may “think” that the tank is full, redirecting water to the pallet.
To clean the system of milk fats, it is recommended to use special tablets to clean the milk circuit or once a week to disassemble a removable capuchinator and wash it under running water. This will prevent the appearance of an unpleasant smell and bacterial plaque.
Prevention and error resetting
To avoid future errors, maintenance regulations must be followed. Regular decalcination prolongs the life of the boiler, and cleaning the brewing unit prevents mechanical spells. The use of water filters reduces the amount of scale at times.
If the machine is hovering and several indicators are burning at the same time, software reset often helps. For this purpose, on many models DeLonghi You need to press and hold certain combinations of buttons. The exact sequence is best looked for in the instructions for a specific modification, as it may differ.
A common mistake of users is to use ground coffee of low quality or with additives (caramel, flavors). Such grains clog millstones and lead to grinding errors. Use only special beans for automatic coffee machines.
⚠️ Attention: Never try to disassemble the casing of a coffee machine while the warranty period is in place. The presence of traces of opening of seals is the basis for refusal of free repair.
Timely service is not only the absence of errors on the display, but also a guarantee of delicious coffee every morning. Keep your internal and external nodes clean, and Magnifica Start It will serve you for years to come.
90% of all errors of the coffee machine are eliminated by careful cleaning of the brewing unit and decalcination.
Frequently Asked Questions (FAQ)
Why does the red triangle burn after cleaning the block?
The stained block is probably not installed correctly. Remove it and insert it again, making sure the guides matched and the block entered before the characteristic click. Also check if the service door is closed.
How often should I decalcify the DeLonghi Magnifica Start?
The frequency depends on the hardness of the water. On average, the procedure is recommended to be carried out every 2-3 months or after preparing 200-300 cups. The machine itself will report the need to clean with a flashing scale indicator.
Can I use a cleaning pill instead of a liquid decalcination?
For Magnifica Start The manufacturer recommends using liquids as they pass through the system better. The tablets may not completely dissolve in narrow tubes and create additional blockages if not specifically designed for automatic machines.
What if the car is noisy but the coffee is not pouring?
Check if the grains are out, if the grinding is too large and if an air traffic jam has formed. Also make sure that the coffee nozzle is not clogged with dried coffee.