Cases Datsun On-Do: selection, installation and care of the cabin

Purchase of a branded car Datsun This is a rational decision, but owners often face the need to protect the cabin from wear. Datsun On-Do covers become the first and most important acquisition after the purchase of the car, allowing you to keep the factory upholstery in perfect condition for many years. The market of accessories today is full of offers, and it is difficult to understand them without preparation.

Japanese sedan assembled at the base Lada GrantaIt has its own design features that must be considered when choosing textile protection. Not all the universal kits sit on this car as intended. Properly selected accessory not only hides defects, but also changes the visual perception of the interior, making it more expensive and cozy.

In this article, we will analyze in detail all the nuances of the choice, starting from materials and ending with the intricacies of the installation. You will learn which models are best suited for harsh Russian conditions and active operation.

Features of the salon Datsun on-DO

Salon Datsun on-DO Designed with ergonomics in mind, but the finishing materials require careful handling. The fabric upholstery of the seats, used in basic configurations, is prone to rapid abrasion on the sidewalls and the formation of reels. That is why many drivers think about buying covers in the first months of ownership.

The design of the seats has characteristic curves and armrests that require an individual approach. Lecala For this model, the contours of the pillows and backs should be exactly repeated. The use of universal models often leads to the fact that the side support is deformed, and airbags (if they are provided by the modification) may not open in time.

⚠️ Warning: When buying covers, be sure to check for airbag slots (Airbag). Their absence can be a critical safety factor in an emergency.

It is also important to consider the color scheme of the interior. Black, gray or beige tones of the cabin dictate their own rules for the choice of accessories. Contrast inserts can refresh the view, but require a sense of proportion so as not to turn the cabin into a motley space.

• 🚗 The exact repetition of the seat shapes ensures comfort on long trips.
• 🛡️ Protection from ultraviolet radiation prevents burnout of factory fabric.
• 🧼 The ability to clean easily makes car care much easier.

Selection of material: eco-leather or fabric

The main dilemma in the choice is the material of manufacture. Two options dominate the market: eco-leather and dense fabric materials (jacquard, alcantara, floc). Each of them has its own advantages and disadvantages that affect the comfort of the driver.

The eco-leather looks aesthetically pleasing and is easy to clean, which is critical for family cars. However, in hot weather, it can heat up, and in winter - to cool, if the car has not turned on the heater for a long time. Modern materials often have microperforation, which improves ventilation, but this does not completely solve the problem of heat exchange.

Cloth covers, especially made of alcantara or high-quality jacquard, free of temperature problems. They are pleasant to the touch in any weather and provide better hygroscopicity. However, removing a stain from coffee or oil from a fabric is much more difficult than from a smooth surface of artificial skin.

When choosing, you should focus on the climatic zone of operation and the presence of children or animals in the cabin. For harsh winters and hot summers, fabric options may be more practical, despite the difficulties with cleaning.

• 🌡️ Eco-skin does not absorb odors, which is important for smokers.
• 💧 Tissue materials absorb moisture better, but they dry longer.
• ✨ Combined models (skin in the center, skin on the sides) combine the advantages of both options.

Types of cut: model vs. universal

For Datsun on-DO It is strongly recommended not to use universal covers if you appreciate the appearance of the car. Universal models are made according to average patterns and are often assembled on rubber bands and hooks, which creates the effect of "bags".

Model covers are sewn specifically for a specific brand and model of the car. In the case of on-DOManufacturers take into account the shape of the head restraints, the presence of armrests on the backs of the front seats and the specific shape of the rear sofa. Such products sit as infused, creating a feeling of factory overhang.

A special feature is 3D-cases, which are made according to individual measurements using computer modeling. They provide maximum landing accuracy, but their cost is much higher. For a budget sedan, this may be redundant, but for perfectionists, it’s ideal.

⚠️ Caution: Cheap all-purpose cases can slide in sharp turns, distracting the driver from the road. Do not skimp on safety and comfort.

When buying a model set, be sure to check the year of release of the car. Even within the same model Datsun The design of the seats may have changed over the years, especially in the restyled versions.

• 📏 The model cut guarantees the absence of folds and tension.
• ⚙️ Accounting for all technological holes for belts and armrests.
• 🎨 Maintaining the ergonomics of the regular seats without distortion.

Instructions for fitting covers

The process of installing high-quality model covers on Datsun on-DO It takes time and care. Do not try to stretch everything at once - this can damage the seams or the upholstery itself. It is better to act consistently, starting from the front row.

Before the start of work, the car is recommended to drown out and move the seats as far back as possible to access the fasteners. In some cases, it may be necessary to remove the head restraints or even remove the seats from the rails if the design of the cover requires it.

The material is pulled on the principle of "from top to bottom". First, the main part is put on the back, then the sidewalls are straightened. Pay special attention to the area of armrests and seat belts - there should be no distortions.

Fixation is carried out using hooks, rubber bands or Velcros, which hide between the back and the seat cushion. Tight fitting often requires effort, but it should be reasonable. The use of plastic blades will help to fill the material in hard-to-reach places without the risk of tearing the fabric.

Sequence of action:
1. Remove the head restraints.
2. Put the cover on the back on top.
3. Put the seat belts in the holes.
4. Fill the edges of the cover between the back and the seat.
5. Pull the bottom and fix it from the bottom.

The final step is to install the back row. Here it is important to properly decorate the folds (if the back is foldable) and provide access to central armrests or cup holders.

Comparison of producers and prices

Accessories market for Datsun It is represented by both domestic and foreign brands. Understanding the differences between them will help to avoid overpayment for the name or, conversely, not to buy a low-quality product.

Russian manufacturers often win in pricing and are better adapted to local operating conditions. Chinese brands may offer a wider range of designs, but their quality control varies from batch to batch.

Brand/Type	Materials	Average price (ruble)	Features
Autopilot.	Jacquard/Eco-skin	4 000 - 6 000	Precise treatment, warranty 1 year
Auto-leader	Eco-skin.	5 000 - 7 500	Premium view, perforation
King Kong	3D molding	8 000 - 12 000	Maximum accuracy, high price
Universal.	Different.	1 500 - 3 000	Low price, mediocre landing

When choosing, you should pay attention not only to the price tag, but also to the reviews of real owners. on-DO. Often in the comments you can find information about how the material behaves after six months of active operation.

Care and maintenance of covers

To cover the Datsun on-DO They served long and kept a neat appearance, they need to be properly cared for. Regular cleaning prevents the absorption of dirt into the material structure and prolongs the product’s service life.

For eco-skin enough wet cleaning using special means for caring for the salon. Aggressive chemistry containing alcohol or acetone can damage the top protective layer, making the material sticky or dull.

⚠️ Note: Do not use bleach on colored fabric covers - this will lead to whitish spots and the destruction of fibers.

The fabric models require more thorough cleaning. It is recommended to use foam cleaners and soft brushes. Drying covers after dry cleaning is better in natural conditions, away from direct sunlight and heating devices.

How do you remove the smell of tobacco?

To eliminate the smell of tobacco from fabric covers, use special spray neutralizers or leave an open container with soda or activated carbon in the cabin at night.

Regular cabin vacuuming is also necessary. Small particles of dust and sand, falling between the cover and the regular upholstery, work as an abrasive, gradually grinding the factory fabric.

Frequently Asked Questions (FAQ)

Can I install covers on the heated seats?

Yes, you can. Thin model covers made of eco-leather or high-quality fabric practically do not affect thermal conductivity. You will feel the heat just as well as you would without it. However, too thick, fluffy models can reduce the efficiency of heating.

Do I need to remove the seats to install on Datsun on-DO?

In most cases, the front row is not required to be removed. For the back sofa, it is sometimes more convenient to remove the pillow to straighten the case qualitatively, but it depends on the specific accessory model and your agility.

How long do the covers dry after dry cleaning?

The drying time depends on the material and humidity in the room. Eco-skin dries in 1-2 hours. Tissue covers (jacquard, alcantara) can dry from 6 to 12 hours. It is not recommended to sit on wet seats.

Is there a difference in the covers for restyling and dorestyling?

The differences may be in the shape of head restraints and the presence/absence of armrests. Always check with the seller for what year of release the kit is intended to avoid problems with landing.