Choosing a child restraint is a process that requires maximum concentration and attention to detail, because the life of the most expensive passenger depends on it. Model Britax Römer Advansafix Pro It has proven itself as one of the most technologically advanced solutions on the market, combining the safety of the 1/2/3 group with advanced protection systems. In this article, we will discuss in detail the design features, nuances of the installation and the real benefits of this system for children weighing from 9 to 36 kg.
Modern safety standards dictate strict requirements for manufacturers, and the German brand Britax Römer It traditionally sets a high standard of quality. The device is equipped with a unique Pivot Link system that directs the impact energy downwards rather than forwards, which is critical to protecting the neck and head of a child in a frontal collision. This is often the deciding factor when choosing between competitors.
It is important to understand that the proper use of all functions of the chair directly affects the effectiveness of protection in an emergency situation. Many parents overlook the finer settings of the belts and head restraint, considering them secondary, but engineering is a good idea. Advansafix Pro It is built so that each part works in a single system. Next, we will look at the key design elements that provide this level of safety.
SecureGuard security system and protection against side impacts
One of the main features of the model is the technology SecureGuardThe fourth point of harness (Fourth point of harness). This element keeps the diagonal part of the seat belt in the optimal position on the hip joint, preventing the belt from slipping on the abdomen. In the case of sudden braking, this reduces the load on the abdominal cavity to 75%, which is a huge indicator for the safety of internal organs.
Side protection in Advansafix Pro is implemented through deep sidewalls and energy-absorbing elements built into the design of the head restraint. In a side impact, the SICT (Side Impact Cushion Technology) system takes over the main force of the impact, distributing it over a solid frame. Parents should know that even if the chair is installed at the center door, these elements continue to work, providing passive protection.
⚠️ Warning: Never relax the seatbelt tension of a car passing through SecureGuard guides, otherwise the system will not work efficiently. The belt should be tightly stretched so that the retainer is firmly attached to the child's thigh.
The frame of the chair is made of high-strength plastic, which does not deform at extreme temperatures and mechanical impacts. Inside are metal reinforcements passing through the zones of greatest load. This combination of materials allows the device to withstand overloads significantly exceeding the standard requirements of the European standards ECE R44/04 and R129.
Adapting to the growth of the child: Click and Safe
The main advantage of the 1-2-3 category is that it can be used for many years. System system Click & Safe It allows you to adjust the height of the head restraint and the tension of the shoulder belts at the same time. You don’t have to resell the straps through the back holes every time, which often causes irritation and assembly errors.
The adjustment mechanism works silently and smoothly. It is enough to press the lever at the top of the head restraint and pull it up to the characteristic click. The indicator on the front panel will show whether the belt is in the correct position relative to the child's shoulders. This is especially useful when the child is dressed in winter clothes and requires quick adjustment.
The width of the seat is also adapted due to the expanding sidewalls. As the child grows older, you can manually push the side elements apart, providing more space for the shoulders. This prevents discomfort and causes the child to sit flat, without falling to the side, which is important for the proper operation of the side protection system.
Secrets of belt adjustment
Many parents are unaware that the Advansafix Pro has a hidden mechanism (thin tuning) of strap length. If the belts become too short after lifting the headrest, they can be adjusted from behind without removing the cover. To do this, you need to find the adjusting tongues on the back and stretch the excess length, then fix with a stopper.
Compatibility table and stages of use
Understanding how the chair transforms as the child grows helps to avoid errors in installation. Britax Römer Advansafix Pro It takes you a long way, changing the configuration from a full-fledged seat with five-point belts to a high-backed booster using a regular car belt.
In the first stages, when the weight of the child is from 9 to 18 kg (Group 1), be sure to use internal five-point belts. They provide reliable fixation and distribute the load to five points. The transition to the use of a regular car belt is possible only when the weight of the child exceeds 15 kg, and the height will allow you to correctly position the diagonal branch of the belt.
| Group | Baby weight | Type of fixation | Situation |
|---|---|---|---|
| Group 1 | 9 - 18 kg | Internal 5-point. strap | Face on the move. |
| Group 2 | 15 - 25 kg | The 3-point seat belt. | Face on the move. |
| Group 3 | 22 - 36 kg | The 3-point seat belt. | Face on the move. |
In booster mode (Groups 2 and 3), the internal belts are hidden in special compartments in the armrests, without disturbing the child. It is important to ensure that in this mode the car seat belt passes strictly over the shoulder and thigh, beating the SecureGuard locks. If the belt is pressing on the neck, you need to raise the head restraint one more step.
Installation of Isofix system and tension check
Firming Isofix model Advansafix Pro It is flexible and flexible, which greatly simplifies the installation process. Metal guides are extended from the base of the chair and snapped on the brackets in the car. The characteristic green indicator at the junction confirms correct installation, which excludes the human factor and installation errors.
After fixing the guides, it is necessary to press the chair back to the car seat to the point. The top anchor belt (Top Tether) is an obligatory mounting element for this model. It prevents the chair from rolling forward with a sharp braking. The belt is thrown over the seat back and attached to the anchorage in the floor of the trunk or on the rear shelf.
- 🔍 Make sure that the green Isofix-based indicator is clearly visible and does not overlap the interior skin.
- 🔍 Make sure the Top Tether belt is stretched and does not sag more than 2-3 cm.
- 🔍 Swing the chair behind the base - it should sit rigidly, without backlashes to the sides.
There is a common misconception that if the chair is tight, then Top Tether can not be fastened. That's a gross mistake. At the time of impact, the inertia of the child's body will create a huge torque, and without the top mount, the chair can shift, leading to injury. Always use the full set of mounts provided by the manufacturer.
☑️ Checking the Isofix installation
Ergonomics, materials and comfort on the trip
Long trips should not be a test for a child, so engineers have paid special attention to ventilation and softness of materials. The covers are made of hypoallergenic tissues that do not contain harmful chemicals. Removable elements can be washed in a car at 30 degrees, making it easy to maintain hygiene.
The ventilation system in the back and seat ensures air circulation, preventing sweating even in hot weather. Soft inserts in the head restraint area create a cozy "nest" for sleep. Many children fall asleep on the way, and the ability to tilt their head without dropping it on their shoulder is an important aspect of comfort.
⚠️ Note: Do not use additional linings, mattresses or capes that are not included in the Britax Römer supply. Such accessories can change the geometry of belts and reduce the effectiveness of safety systems in case of an accident.
The armrests have a soft upholstery and a comfortable shape, allowing the child to relax his hands. At an older age, when the sidebars are used for a regular belt, the armrests become a support for the elbows, which makes the landing more natural. A wide range of adjustments of the angle of inclination allows you to find the optimal position for sleep or wakefulness.
Comparison with competitors and final conclusions
In the child car seat market Advansafix Pro It competes with models from Cybex, Recaro and Maxi-Cosi. The main difference of the German security school is the emphasis on rigid fixation of the hull and minimization of displacement. While some competitors are betting on soft materials, Britax opts for structural strength and engineering protection.
The cost of the device may seem high, but if you count it by the number of years of use (from 9 months to 12 years), the price per day of operation becomes quite acceptable. The durability of plastic and the wear resistance of fabrics allow the chair to be transferred to the next children in the family without loss of performance.
- 🏆 The highest results in independent crash tests ADAC and Stiftung Warentest.
- 🏆 Unique technology Pivot Link, reducing the load on the cervical region.
- 🏆 The ability to use up to 36 kg, which is rare for modern models.
In summary, it can be said that Britax Römer Advansafix Pro It is an investment in safety that pays off with the peace of mind of parents. The combination of proven technology, customization convenience and long life makes it one of the leaders in its class. When used correctly, this chair will be a reliable protector of your child at all stages of growing up.
Before buying, try on a chair in your car. Despite the versatility of Isofix mounts, the shape of the seats in different cars can vary, affecting the angle of installation and comfort.
Frequently Asked Questions (FAQ)
Can I install Britax Römer Advansafix Pro against the current traffic?
No, this model is designed to be installed only by the face in the course of the car. For younger children who require retracement, consider the Britax Römer Dualfix series or similar models from the 0+/1 group.
What if there are no Isofix mounts in the car?
The Advansafix Pro model requires Isofix mounts to be installed. If you don’t have them in your car, you can’t use that particular seat. You will need to choose a model that is only attached to the standard seat belt, for example, the Britax Römer Evolva.
How often should I change my car seat after an accident?
The manufacturer recommends replacing the chair after any accident, even if there is no visual damage. Microcracks in plastic that are invisible to the eye can critically reduce the strength of the structure on the next impact. Insurance companies often cover the cost of replacement in such cases.
Can I use other Britax models?
The use of covers from other models is not recommended, as they may not meet the shape of the pillows and fire retardant standards of a particular model. This can disrupt the side protection and ventilation system.