Choice car seat This is perhaps the most responsible decision for parents, because the life and health of the child on the road directly depends on it. Model Britax Römer King 2 For many years, it has been a benchmark in its class, combining advanced German technology and time-tested reliability. Unlike cheaper analogues, it uses enhanced lateral protection and a unique mounting system that minimizes the load on the neck when hit.
Many parents wonder why this model is so popular among security experts. The answer lies in the combination of ergonomics and rigidity of the design. Security framework It is made of impact-resistant plastic, which does not deform even during serious overloads. The interior upholstery is made of hypoallergenic materials, which is critical for long trips with small passengers.
In this article, we will discuss in detail all the nuances of operation. King 2from the correct installation to the fine settings of the head restraint. You will learn how to avoid common installation errors and why some of the features of this seat are unique to the 1-2-3 child car seat market.
Key security technologies of Britax Römer
The basis of protection in the model King 2 is the system V-shaped backrest (V-shaped backrest) It is designed specifically to ensure the optimal position of the child during movement. Unlike the competitors’ straight backs, the V-shaped profile repeats the natural curve of the spine, which allows the child to sit flat and not fall to one side during sleep.
Technology deserves special attention. Deep Side Impact Protection. The high sidewalls of the chair work as a buffer, absorbing the energy of the side impact. This is achieved by the special geometry of the head restraint and deep sides. If the car gets hit in the side, these elements will take the main load on themselves, preventing the displacement of the child’s head into the danger zone.
- 🛡️ Reinforced steel frame for maximum structural strength upon impact.
- 🧸 Fabric with moisture removal technology for a comfortable microclimate in the heat.
- 🔒 A fastening system that excludes accidental unbuttoning of the belts by the child.
⚠️ Never use a car seat that has been in an accident, even if there is no visible damage. Microcracks in plastic can become fatal when reloaded.
Design features and ergonomics
Engineers Britax Römer They've given a lot of attention to regulation, because kids grow up very fast. Headrest. height-adjustable 7 positions, which allows you to use a chair from 9 to 36 kg (about 9 months to 12 years). The adjustment mechanism is made so that the seat belts automatically adjust to the new height of the child, without requiring manual rearrangement of the straps.
Seat equipped with system Pivot Link (depending on the modification and year of release, the functionality may vary, but the principle is the same), which directs the energy of the frontal impact downwards, not forward. This reduces the strain on the child’s shoulders and neck at a critical point in the collision. Soft straps on the belts prevent rubbing, and wide straps distribute pressure evenly across the chest.
It is important to note the quality of the materials. The case is easily removed and withstands many washes at 30 degrees, without losing color and shape. The internal filler has a memory effect, returning to its original state after compression. This ensures that even after years of use, the chair will retain its shape.
Step-by-step installation instructions with ISOFIX
Installation King 2 systemically ISOFIX This is the safest and easiest way to install. It rigidly fixes the chair to the car body, excluding its displacement during sharp braking. Before you start installing, make sure your car has the appropriate braces hidden between the back and sofa seat.
First, you need to put forward the guides ISOFIX in the chair. To do this, pull the special levers in the lower front of the base. Then insert the guides into the car brackets until the characteristic click. Indicators on the ends of the tracks should light up in green, signaling the correct fixation.
☑️ Verification of ISOFIX installation
After fixing the base, it is necessary to tightly press the back of the chair to the back of the car seat. If it comes with a set Top Tether (top anchor), be sure to hook it by the loop behind or under the trunk shelf. This will prevent the chair from being “clung” nose down during a frontal impact.
Procedure:1. Extend the ISOFIX guides.
2. Insert the car brackets before the click.
3. Check the green lights.
4. Press the back of the chair.
5. Fasten the child with a regular belt.
Installation with a regular seat belt
If your car does not have a system ISOFIX Or you're planning to move the seat between different cars, use a regular three-point belt. This method is also certified and provides a high level of safety, but requires a closer tension check.
Pass the car belt through special guides on the body King 2. They are usually located at the bottom of the back and are color-coded (often blue or red, depending on the weight group). The belt should be strictly along a given trajectory, without twisting.
| Parameter | ISOFIX | State seat belt |
|---|---|---|
| Installation speed | High (10-15 sec) | Medium (30-60s) |
| Risk of error | Minimum | Medium. |
| Mobility | Low (tied to a car) | Tall. |
| Stability of the base | Hard fixation | Depends on the tension. |
After stretching the belt through the chair, tighten it tightly. The belt should be stretched so that the chair does not dangle from side to side. A backlash of not more than 2 cm at the anchorage point is allowed. A loosely tightened belt is the most common mistake, negating all protection.
Adjustment for the height and weight of the child
Right setup headrest - a guarantee of neck safety. In the model King 2 headrest height is changed by the movement of the lever from above. Raise it so that the upper edge is at the level of the child’s ears, but not above the top of the head. If the headrest is too low, it will press on the shoulders; if high, it will not protect the neck when impacted.
The seat belt is adjusted automatically with the head restraint. However, the straps of the shoulder belts should pass strictly through the middle of the child's shoulder. They should not slide on the arm or, conversely, strangle the neck. To check, conduct a test "pluck": pinch the fold of the belt at the collarbone, it should move away from the body no more than 1-2 cm.
- 📏 Adjust your height every 2-3 months as your baby grows.
- ❄️ In winter, remove a large winter jacket before landing in a chair.
- 👶 For children, use special soft inserts (if provided by the model).
⚠️ Warning: The use of winter clothing with a voluminous down jacket under seat belts is unacceptable! When hit, the down jacket will doubt, the belt will weaken, and the child may fly out of the chair.
Car seat care and maintenance
A car seat is a place where a child spends a lot of time, so hygiene is critical. Fabric covers Britax Römer Designed to be removable. To remove the case, follow the instructions: you usually need to disconnect the plastic clips at the bottom and carefully pull the fabric without pulling sharply at the seams.
Wash covers should be in delicate mode at a temperature not higher than 30 ° C. Use of bleach and harsh chemicals forbiddenBecause they destroy the flame retardant impregnation of fabric. Dry covers need to be spread out, away from direct sunlight and heating devices to avoid shrinkage.
Clean the plastic elements with a wet cloth with a soft soapy solution. Don’t use solvents, gasoline, or abrasive sponges – they can make plastic brittle. Pay special attention to the mechanism of the belt lock: if there are crumbs or dirt, blow it with compressed air, but do not lubricate it with oil.
Frequently Asked Questions (FAQ)
How old and weight can you use Britax Römer King 2?
Model King 2 It belongs to the group 1-2-3. It is designed for children weighing from 9 to 36 kg. By age, this is about 9 months to 12 years, but you need to focus primarily on the weight and height of the child, as well as the position of the shoulder straps.
Can I install this chair in the front seat?
Yes, installation in the front passenger seat is possible, but only if the front airbag is turned off. If the pillow cannot be turned off, installation in front forbidden due to the risk of injury to the child when the airbag is triggered.
What if the ISOFIX indicator does not turn green?
That means the chair didn't snap. Check whether a foreign object (crumbs, fabric) prevents the entry of guides into the brackets. Try to tilt the chair and press it into the characteristic metal click. If the lights are red or not visible, repeat the installation procedure.
Does King 2 have a sleeping position?
In the model King 2 There is no full position of "semi-lying" with the tilt of the entire bowl, as in cradles for infants. However, thanks to its ergonomic shape and adjustable headrest, the child can sleep comfortably upright without dropping his head on his chest. The tilt of the backrest relative to the car seat depends on the shape of your car's sofa.
How long is the car seat warranty in place?
The standard warranty period from the manufacturer is usually 2 years from the date of purchase if there is a check. However, the product life (shelf life of plastic) is, as a rule, 6-7 years from the date of production, which is indicated on the sticker on the body of the chair.