Many people mistakenly believe that Aurus is the product of one single enterprise. In fact, several key sites are involved in the production chain, each of which plays its own role. From body assembly to final interior finishing, the process is strictly controlled and meets the highest international standards. In this article we will figure out Which factories are involved in production? Aurus, what models are produced there and why this is important for potential buyers.
Why is there a question about the manufacturing plant? Aurus so important?
Choosing a premium car always involves a thorough analysis of not only its technical characteristics, but also the reputation of the manufacturer. In the case of Aurus this is especially relevant, because the brand is relatively young, and its products are positioned as an alternative to foreign giants like Mercedes-Benz or BMW.
Firstly, knowledge of the manufacturer allows you to evaluate the level of technology and quality control. For example, if a car is assembled at a company with many years of experience working with premium brands, this guarantees high assembly accuracy and reliability of parts. Secondly, the location of production affects logistics, cost and even warranty service. Finally, for many buyers the patriotic aspect is important: Aurus is one of the few Russian brands that can compete with world leaders.
In addition, information about the plant helps to avoid counterfeits. Fraudsters have already appeared on the market offering “gray” or counterfeit Aurus at reduced prices. Knowing the official production sites, you can easily distinguish the original from the fake.
Main plant: “NAMI” in Moscow
The main production site for Aurus is Research Automobile and Motor Vehicle Institute (US) in Moscow. It was here that prototypes were developed and mass production of the brand's first models was launched. Factory US has a rich history - it was founded in 1918 and for a long time was engaged in creating experimental and unique cars for Soviet leaders.
Today on this site they gather:
- 🚗 Aurus Senat — flagship sedan of the executive class;
- 🚐 Aurus Arsenal — premium minivan;
- 🚙 Aurus Komendant - off-road SUV.
Feature of production at US is manual assembly most nodes. This allows for perfect fit of parts and high quality finish. For example, body Aurus Senat It is made of high-strength steel and aluminum alloys, and then undergoes multi-stage control for tightness and anti-corrosion protection. Interestingly, some components, such as engines and transmissions, are supplied from other Russian factories, but final assembly and testing take place in Moscow.
Upon examination Aurus pay attention to the welding seams of the body - on the original models they are almost invisible thanks to the laser welding technology used on US.
Second key player: the Likinsky Bus plant in Yelabuga
Besides US, in production Aurus actively involved Likinsky Bus Plant (LiAZ) in the city of Elabuga (Republic of Tatarstan). This company, famous for its buses and trolleybuses, has been modernized to produce premium cars.
On LiAZe production is concentrated:
- 🚘 Aurus Senat L — an extended version of the sedan for official events;
- 🚚 Special armored modifications for government needs.
The plant in Yelabuga is equipped with modern robotic lines that ensure high assembly accuracy. Also used here modular platform, allowing you to quickly adapt production to different modifications Aurus. For example, armored versions undergo additional tests for ballistic resistance, and the interiors are equipped with eavesdropping and burglary protection systems.
Interesting fact: LiAZ works closely with US, sharing technologies and human resources. This allows us to maintain a single quality standard at both sites. However, if you are planning to purchase Aurus, it is worth checking at which plant a particular machine was assembled - this may affect the configuration and warranty conditions.
Why are armored Aurus assembled in Yelabuga?
The Likinsky plant historically specialized in the production of equipment for government agencies, including buses for transporting VIPs. The processes for working with armored materials and protection systems had already been established here, which made it an ideal platform for the release of protected versions Aurus.
Localization of components: who else is involved in production?
Aurus is positioned as a completely Russian product, but in fact, other enterprises are also involved in its creation - both domestic and foreign (until 2022). Let's consider key partners:| Component | Supplier / Manufacturer | Features |
|---|---|---|
| Engines | Zvezda Plant (St. Petersburg), Porsche (until 2022) | Since 2023, domestic V8 volumes of 4.4 liters (600 hp) have been used, developed with the participation of US. |
| Gearbox | ZF (Germany), KAMAZ (since 2026) | From 2026, it is planned to switch to a Russian 8-speed automatic transmission, adapted to Aurus. |
| Electronics and multimedia | Rostec, Bosch (partially) | Security and entertainment systems are developed taking into account the requirements of the Russian FSB. |
| Body panels | Plant "SeAZ" (Serpukhov) | Aluminum alloys and high-strength steel with anti-corrosion coating are used. |
Until 2022, the share of imported components in Aurus reached 30–40%, but after the introduction of sanctions the manufacturer is actively working on import substitution. For example, instead of German engines Porsche now domestic units are being installed, and electronics are being developed with the participation Rostec. This not only reduces dependence on foreign suppliers, but also simplifies service in Russia.
Important: Starting from 2026, all new Aurus are equipped exclusively with Russian engines and transmissions, which can affect dynamic performance and reliability.
How to distinguish the original Aurus from fake?
The growing popularity of the brand has led to the emergence of fraudulent schemes on the market. To avoid becoming a victim of fraud, pay attention to the following details:
☑️ Signs of the original Aurus
or LiAZ etching methodOne of the most reliable ways to check is to request car history via the official website Aurus Motors or service traffic police. It is also worth visiting an authorized center - they will provide you with complete information about the manufacturer and production date.
⚠️ Attention: Scammers often offer "unique" versions Aurus with "European assembly" or "exclusive finishing". In fact, all official models are produced only in Russia, and any mention of foreign factories is a sign of deception.
Development prospects: new plants and models
Production Aurus does not stand still. Several more sites are planned to be launched in 2026–2026:
1. Plant in Kaluga region — production of electric versions will be organized here Aurus, including hybrid modifications. The enterprise is being built from scratch and will be equipped with the most modern equipment.
2. Joint venture with KAMAZ - for the production of commercial versions (for example, armored vans based on Komendant).
3. Capacity expansion LiAZ - to increase output Senat L and special versions for export.
The brand also plans to enter foreign markets, primarily the countries of the Middle East and Asia. This will require certification of production processes according to international standards, which is already being carried out jointly with Rosatom and Rostec.
By 2026 Aurus plans to completely abandon imported components, which will make the brand completely independent from external suppliers.
FAQ: Frequently asked questions about production Aurus
Where exactly in Moscow is the plant located? USwhere they collect Aurus?
The plant is located at: Moscow, Avtomotornaya street, building 2. This is a historical site where cars for Soviet leaders were previously developed. Today there is a modern production facility with closed access to outsiders.
Is it possible to visit the factory Aurus with a tour?
Official excursions to US and LiAZ are not carried out due to the secrecy regime. However, sometimes closed events are organized for dealers or government customers. Follow the announcements on the website Aurus Motors.
What models Aurus collected in Yelabuga?
On Likinsky plant extended versions are produced Senat L, armored modifications for government needs, as well as special orders (for example, medical or executive options). Regular Senat and Komendant are gathering in Moscow.
Is it true that Aurus assembled from Chinese spare parts?
No, it's a myth. Until 2022, some electronics were supplied from Europe (Bosch, ZF), but now there is active import substitution. Chinese components in Aurus are not used. The main suppliers are Russian enterprises (Star, KAMAZ, Rostec).
Will they release Aurus outside of Russia?
There are no such plans at the moment. All production facilities are concentrated in Russia, and export models will be delivered assembled. However, it is possible that in the future assembly sites may appear in friendly countries (for example, in the UAE or Kazakhstan).