Washing machine Ariston Has the drum stopped spinning, but the laundry remains wet after “washing”? This problem occurs in both older models (AVL 105, AVSL 109), and in new ones (Hotpoint-Ariston AQD 1070D, EVO II>). In 80% of cases the malfunction is associated with mechanical breakdowns or electronic failures - and you can fix it yourself without calling a technician. But first you need to accurately determine the cause.

In this article we will look at all possible scenarios, from a banal overload of laundry to serious damage to the engine or electronic module. You will learn how to check each node without special tools, what errors the machine produces when this or that malfunction occurs, and when it’s really time to contact service. And for the most common cases we have prepared step-by-step instructions with photos and checklists for diagnostics.

If the drum does not rotate at all (does not even twitch when trying to start) - the problem is most likely in electrical part: motor, brushes, tachometer or control module. If the drum rotates jerkily, creaks or is blocked at a certain stage, the fault is mechanics: bearings, belt, shock absorbers or foreign objects between the tank and drum. Let's take a closer look.

⚠️ Important: Before any diagnosis Unplug the machine and turn off the water. In models Ariston with vertical loading (AVTL 127, AVTLS 107) access to the components is more difficult - you may need to remove the top cover or side panel.

1. Overload of laundry or imbalance

The simplest and most common reason why Ariston the drum does not spin - exceeding maximum load or improper distribution of laundry. The machine may lock up if:

  • 🧺 Things have gotten into a ball (especially often with bed linen or jackets).
  • 📦 The load exceeds the permissible weight (for example, 7 kg instead of 6 kg for your model).
  • 👟 There is one heavy thing in the drum (blanket, rug), which shifts the center of gravity.

In this case, the machine may generate errors F05 (imbalance) or F11 (rotation problems). Some models (Hotpoint-Ariston WMSL 701) simply stop the program and flash the “Drain/Spin” indicator.

How to fix:

  1. Turn off the machine and remove some of the laundry.
  2. Distribute items evenly throughout the drum.
  3. Run the program again, selecting the “Rinse + Spin” mode to check.
📊 Your Ariston washing machine with loading
Up to 5 kg
5-7 kg
7-9 kg
More than 9 kg
I don't know

If after this the drum starts working, the problem is solved. If not, move on to the next steps. In models with the "Auto-weighing" function (for example, Ariston AQXXF 129) imbalance can occur even with normal laundry weight due to a faulty sensor.

2. Drive belt failure

The belt transmits rotation from the engine to the drum. If he torn, stretched or slipped, the drum will not spin, but the motor may hum. Signs of a problem:

  • 🔊 The machine is humming, but the drum is standing still.
  • 🛠️ When rotating the drum manually, you feel a slight backlash.
  • 🔍 Visually, the belt is loose or missing (visible through the bottom panel).

How to check the belt Ariston:

  1. Remove the back cover of the machine (unscrew 4-6 screws).
  2. Find the belt - it should be tensioned between the engine pulley and the drum.
  3. If the belt is intact, check its tension: when pressed with a finger, the deflection should be no more than 1-1.5 cm.

How to replace the belt yourself:

☑️ Replacing the belt in Ariston

Done: 0 / 6

⚠️ Attention: In models Ariston with direct drive (for example, Hotpoint-Ariston TDLS 1022) there is no belt - rotation is transmitted directly from the engine to the drum. If the drum does not spin, the problem may be with the clutch or bearings.

Ariston model Drive type Belt number (original) Cost, rub.
AVL 105 Belt C00168750 800-1200
AQD 1070D Belt C00325701 1000-1400
WMSL 701 Direct — —
EVO II AQXXF 129 Belt C00345678 1200-1600

3. Motor or brushes malfunction

If the belt is intact, but the drum does not rotate, the problem may be electric motor or worn out brush units. Signs:

  • 🔌 The machine turns on, but does not respond to the start command.
  • 🔥 The engine smells like burning or you can hear crackling.
  • 🛑 The drum does not rotate even when turned manually (the rotor is jammed).

How to check brushes:

  1. Remove the back cover and locate the motor (usually at the bottom).
  2. Disconnect the terminals and remove the motor (unscrew 2-3 bolts).
  3. The brushes are located on the sides of the motor - if their length is less than 1 cm, replacement is required.

Repair cost:

  • 🔧 Set of brushes for Ariston — 500-900 rub.
  • 🔄 Engine replacement - 3000-6000 rubles. (depending on model).
💡

If the engine hums but does not rotate, try turning the drum slightly by hand - sometimes this helps to “move” the rotor from its dead center. If the machine starts working after this, the problem is worn brushes or bearings.

4. Failure of the tachometer (Hall sensor)

The tachometer controls the rotation speed of the drum. If it fails, the machine may:

  • ⚡ Run the program, but do not spin the drum.
  • 🔄 Rotate the drum jerkily or at the wrong speed.
  • 🚨 Give an error F08 or F18.

How to check the tachometer:

  1. The sensor is located on the engine (a small plastic part with wires).
  2. Test it with a multimeter - the resistance should be 50-200 Ohms.
  3. If there is no resistance or it “floats”, the sensor is faulty.

⚠️ Attention: In models Ariston Hotpoint with inverter motors, the tachometer is built into the motor and cannot be replaced separately - the entire motor will need to be replaced.

5. Jamming of bearings or oil seal

If the drum does not rotate even manually or rotates with strong creaking/crunching sound, the problem is bearings or oil seal. This is a serious breakdown that requires disassembling the machine. Signs:

  • 🔊 Loud noise when the drum rotates.
  • 💧 Leaks of rusty water under the car (the oil seal is destroyed).
  • 🛑 The drum “sticks” in a certain area of ​​rotation.

How to temporarily extend the operation of the machine:

What to do if the bearings are already squeaking, but there is no way to change them yet?

If the bearings have just started to creak, you can extend their service life by 1-2 months by lubricating them through the technological holes (if your model has them). Use only heat-resistant bearing grease (eg Liqui Moly LM 50). However, this is a temporary measure - the bearings will still need to be replaced.

Bearing repair cost in Ariston:

Model Cost of bearings, rub. Cost of the oil seal, rub. Difficulty of replacement
AVL 105 400-600 200-300 Average
AQD 1070D 600-900 300-400 High
EVO II AQXXF 129 800-1200 400-600 Very high

6. Problems with the electronic module

If all mechanical components are in good working order, but the drum does not spin, the fault is control module (pay). This is one of the most expensive breakdowns. Signs:

  • 📛 The machine turns on, but does not respond to the buttons.
  • 🔄 The program starts, but the drum does not rotate (there is no signal to the motor).
  • 🚨 Random errors are generated (F02, F13, F20).

What you can do yourself:

  1. Disconnect the machine from the network for 10-15 minutes (sometimes “rebooting” the module helps).
  2. Check the contacts on the board - oxidation or scorching may cause malfunctions.
  3. If you have experience with a soldering iron, inspect the board for swollen capacitors or burnt tracks.

⚠️ Attention: In models Ariston Hotpoint with display (AQD 1070D, WMSL 701) the control module often fails due to power surges. If you have an unstable network, be sure to connect the car through a stabilizer.

💡

Independent repair of an electronic module is possible only if you have experience working with radio electronics. In most cases, it is easier and more reliable to replace the entire board (cost 4000-8000 rubles, depending on the model).

7. Foreign objects between the tank and the drum

Sometimes the drum gets blocked due to small objects (coins, buttons, bra wires) getting caught between the tank and the drum. This may happen if:

  • 🧲 The machine washed things with metal elements.
  • 👗 There are coins or keys in your pockets.
  • 🧺 The drain filter mesh is damaged (objects penetrate into the tank).

How to get a foreign object:

  1. Remove the top cover of the machine (unscrew the 2 screws at the back and slide the cover back).
  2. Tilt the car back (put something under the front).
  3. While turning the drum by hand, try to find and remove the item with tweezers or a magnet.

If the object is deeply lodged, the tank may need to be disassembled. In this case, it is better to contact the service.

FAQ: Frequently asked questions about drum malfunctions in Ariston

🔹 The machine turns on, water fills, but the drum does not spin. What is the reason?

Most likely the problem is drive belt (torn or slipped) or motor brush assembly. Also check to see if there is a foreign object blocking the drum. If the belt and brushes are in order, and the drum does not rotate even when cranked manually, a breakdown is possible tachometer or electronic module.

🔹 Ariston gives error F05 and does not spin the drum. What to do?

Error F05 means imbalance or problems with rotation. Try:

  1. Reboot the machine (unplug for 1 minute).
  2. Take out some of the laundry and distribute it evenly.
  3. Check if there is any foreign object stuck between the tank and the drum.

If the error remains, check tachometer And belt drive.

🔹 Is it possible to replace bearings in Ariston yourself?

Theoretically yes, but this complex repairs, requiring complete disassembly of the machine, removal of the tank and the use of special pullers. If you do not have experience, it is better to contact the service. The cost of replacing bearings is from 3,000 to 6,000 rubles. (depending on model).

🔹 The Ariston washing machine hums, but the drum does not rotate. What to check?

These symptoms usually indicate:

  • 🔧 Torn belt (the engine is running, but rotation is not transmitted).
  • 🔥 Jammed engine (the windings burned out or the rotor jammed).
  • 🛑 Seized bearings (the drum does not rotate even manually).

First remove the rear cover and check the belt, then the engine.

🔹 How much does it cost to repair if Ariston does not spin the drum?

The cost depends on the reason:

Breaking Cost of spare parts, rub. Cost of work, rub.
Belt replacement 800-1500 1000-1500
Replacing motor brushes 500-900 1500-2000
Replacing bearings 800-1500 3000-6000
Replacing the tachometer 400-800 1000-1500
Repair/replacement of the control module 4000-8000 2000-3000